Search results for "layer"

showing 10 items of 2667 documents

Molecular mechanisms of aroma persistence: From noncovalent interactions between aroma compounds and the oral mucosa to metabolization of aroma compo…

2021

International audience; The present study aims to reveal the molecular mechanisms underlying aroma persistence, as it plays a major role in food appreciation and quality. A multidisciplinary approach including ex vivo experiments using a novel model of oral mucosa and saliva as well as in vivo dynamic instrumental and sensory experiments was applied. Ex vivo results showed a reduction in aroma release between 7 and 86% in the presence of the thin layer of salivary proteins covering the oral mucosa (mucosal pellicle). This reduction was explained by hydrophobic interactions involving the mucosal pellicle and by the ability of oral cells and saliva to metabolize specific aroma compounds. The …

Salivaproton transfer reaction-mass spectrometry (PTR-MS)Thin layeraroma perception01 natural sciencesdynamic sensory evaluationAnalytical ChemistryPersistence (computer science)0404 agricultural biotechnologyIn vivomedicine[SDV.BBM]Life Sciences [q-bio]/Biochemistry Molecular BiologyOral mucosaSalivary Proteins and PeptidesSalivaAromaVolatile Organic CompoundsbiologyChemistry010401 analytical chemistryMouth Mucosafood and beveragesafter-odour04 agricultural and veterinary sciencesGeneral Medicinebiology.organism_classification040401 food science0104 chemical sciencesmedicine.anatomical_structureBiochemistrymucosal pelliclearoma releaseOdorantsSalivary Proteins[SDV.AEN]Life Sciences [q-bio]/Food and NutritionEx vivoFood Science
researchProduct

The Postglacial Isotopic Record of Intermediate Water Connects Mediterranean Sapropels and Organic‐Rich Layers

2020

Carbon‐rich layers exist at both sides of the Mediterranean Sea sedimentary record and are called sapropels and organic rich layers (ORLs), respectively, in the eastern and western basins. They have different levels of organic carbon accumulation and seafloor oxygen deprivation. The most recent sapropel and ORL depositions have a different timing, approximately 10.8–6.1 and 14.5–9.0 ka, respectively. Here we investigate oxygen isotopic records of three foraminifera species that occupy different habitats within the Sicily Channel water column since ~12.0 ka, thus in the sill between the eastern and western Mediterranean basins. These data are ice volume corrected, to get information on water…

Sapropel Organic rich layerMediterranean climateAtmospheric Sciencecarbon isotope010504 meteorology & atmospheric sciencesGeochemistryPaleontology15. Life on land010502 geochemistry & geophysicsOceanography01 natural sciences13. Climate actionLIWoxygen isotope14. Life underwaterGeology0105 earth and related environmental sciencesPaleoceanography and Paleoclimatology
researchProduct

Poly(sarcosine) surface modification imparts stealth-like properties to liposomes

2019

Circulation lifetime is a crucial parameter for a successful therapy with nanoparticles. Reduction and alteration of opsonization profiles by surface modification of nanoparticles is the main strategy to achieve this objective. In clinical settings, PEGylation is the most relevant strategy to enhance blood circulation, yet it has drawbacks, including hypersensitivity reactions in some patients treated with PEGylated nanoparticles, which fuel the search for alternative strategies. In this work, lipopolysarcosine derivatives (BA-pSar, bisalkyl polysarcosine) with precise chain lengths and low polydispersity indices are synthesized, characterized, and incorporated into the bilayer of preformed…

SarcosineSurface PropertiesProton Magnetic Resonance SpectroscopyDispersityStatic ElectricityNanoparticle02 engineering and technology010402 general chemistry01 natural sciencesBiomaterialsAnimals Genetically Modifiedchemistry.chemical_compoundAnimalsGeneral Materials ScienceSurface chargeComplement ActivationZebrafishLiposomeChemistryBilayerSarcosineGeneral Chemistry021001 nanoscience & nanotechnology0104 chemical sciencesMolecular WeightLiposomesBiophysicsPEGylationSurface modification0210 nano-technologyPeptidesBiotechnology
researchProduct

Production of a Double-Layer Scaffold for the “On-Demand” Release of Fibroblast-like Limbal Stem Cells

2019

The production and characterization of a double layer scaffold, to be used as a system for the “on demand” release of corneal limbal stem cells are here reported. The devices used in the clinics and proposed so far in the scientific literature, for the release of corneal stem cells in the treatment of limbal stem cell deficiency, cannot control the in vivo space-time release of cells since the biomaterial of which they are composed is devoid of stimuli responsiveness features. Our approach was to produce a scaffold composed of two different polymeric layers that give the device the appropriate mechanical properties to be placed on the ocular surface and the possibility of releasing the stem…

ScaffoldMaterials sciencePolyestersFibroblast-like limbal stem cells Limbal stem cells deficiency On demand cell releasing systems Electrospun scaffold Hyaluronic acid based film coatingBiocompatible Materials02 engineering and technologyLimbus CorneaeLimbal stem cell deficiencyCornea03 medical and health sciences0302 clinical medicineCell Line TumorOn demandmedicineHumansGeneral Materials ScienceFibroblastCells CulturedDouble layer (biology)Stem CellsEpithelium CornealEpithelial CellsFibroblasts021001 nanoscience & nanotechnologyeye diseasesCell biologymedicine.anatomical_structureSettore CHIM/09 - Farmaceutico Tecnologico ApplicativoMicroscopy Electron Scanning030221 ophthalmology & optometrysense organsStem cell0210 nano-technologyStem Cell TransplantationACS Applied Materials & Interfaces
researchProduct

Deriving scaling laws in geodynamics using adjoint gradients

2018

Abstract Whereas significant progress has been made in modelling of lithospheric and crustal scale processes in recent years, it often remains a challenge to understand which of the many model parameters is of key importance for a particular simulation. Determining this is usually done by manually changing the model input parameters and performing new simulations. For a few cases, such as for folding or Rayleigh-Taylor instabilities, one can use thick-plate stability analysis to derive scaling laws to obtain such insights. Yet, for more general cases, it is not straightforward to do this (apart from running many simulations). Here, we discuss a numerically cheaper approach to compute scalin…

Scaling law010504 meteorology & atmospheric sciencesScale (ratio)Folding (DSP implementation)Geodynamics010502 geochemistry & geophysics01 natural sciencesInstabilityStability (probability)Theoretical physicsGeophysicsKey (cryptography)Statistical physicsGeologySingle layer0105 earth and related environmental sciencesEarth-Surface ProcessesTectonophysics
researchProduct

A Mlp-Based Digit And Uppercase Characters Recognition System

1997

A simple software solution for digit and uppercase handwritten characters recognition is presented. The proposed solution is based on a two-layer Multi Layer Perceptron (MLP) trained by a conjugate gradient descent (CGD) optimization algorithm. This neural network is embedded in a software tool for automatic processing of forms achieved using a scanner. The chosen solutions allow us to obtain good results both in terms of recognition rate and speed. In the paper are fully described design details and experimental results.

ScannerArtificial neural networkComputer sciencebusiness.industrySpeech recognitionNumerical digitComputingMethodologies_PATTERNRECOGNITIONSoftwareSimple (abstract algebra)Computer Science::Computer Vision and Pattern RecognitionMultilayer perceptronConjugate gradient methodLogical matrixbusiness
researchProduct

Studies on atomic layer deposition of IRMOF-8 thin films

2015

Deposition of IRMOF-8 thin films by atomic layer deposition was studied at 260–320 C. Zinc acetate and 2,6-naphthalenedicarboxylic acid were used as the precursors. The as-deposited amorphous films were crystallized in 70% relative humidity at room temperature resulting in an unknown phase with a large unit cell. An autoclave with dimethylformamide as the solvent was used to recrystallize the films into IRMOF-8 as confirmed by grazing incidence x-ray diffraction. The films were further characterized by high temperature x-ray diffraction (HTXRD), field emission scanning electron microscopy, Fourier transform infrared spectroscopy (FTIR), time-of-flight elastic recoil detection analysis (TOF-…

Scanning electron microscopeAnalytical chemistryfield emission microscopesInfrared spectroscopyAtomic layer depositionThin filmFourier transform infrared spectroscopyta116kuormausta114ChemistrySurfaces and InterfacesatomikerroskasvatusCondensed Matter PhysicspalladiumX-ray diffractionSurfaces Coatings and FilmsAmorphous solidfourier transform infrared spectroscopyElastic recoil detectionamorphous filmsloadingCarbon filmthin filmsenergy dispersive spectroscopyatomic layer depositionX-ray spectroscopyohutkalvotzinc compoundsscanning electron microscopyJournal of Vacuum Science and Technology A
researchProduct

MAC learning

2016

Cognition as a way to deal with the challenges of future wireless networks has been largely considered by the recent literature, with a main focus on physical layer adaptability and dynamic spectrum access. In this demo, we show how a simple cognition mechanism can be also applied at the MAC layer, by exploiting the emerging paradigm of programmable wireless cards. The idea is using the formal definition of simple MAC protocol components and platform-independent representation of channel events gathered from the wireless node, for emulating the behavior of protocols which are not currently running on the network, learning about their expected performance, and dynamically reconfiguring the w…

ScheduleSIMPLE (military communications protocol)Wireless networkbusiness.industryComputer scienceDistributed computingNode (networking)Physical layer020206 networking & telecommunications02 engineering and technology0202 electrical engineering electronic engineering information engineeringWirelessbusinessProtocol (object-oriented programming)Computer networkCommunication channelProceedings of the Tenth ACM International Workshop on Wireless Network Testbeds, Experimental Evaluation, and Characterization
researchProduct

The synthesis of a hybrid graphene-nickel/manganese mixed oxide and its performance in lithium-ion batteries

2012

[EN] Mixing of aqueous suspensions of delaminated NiMn layered double hydroxide (LDH) and graphene oxide leads to the instantaneous precipitation of a hybrid material that after calcination under inert atmosphere at 450 degrees C leads to Ni6MnO8 nanoparticles deposited on larger reconstituted graphene sheets. This material exhibits electrical conductivity similar to graphite, superparamagnetism and can be used as an anode for Li-ion batteries. A maximum capacity value of 1030 mAh g(-1) was found during the first discharge, and capacity values higher than 400 mAh g(-1) were still achieved after 10 cycles. The methodology used here should allow the preparation of a large variety of hybrid gr…

Secondary BatteryQUIMICA ORGANICACarbon MaterialsQUIMICA ANALITICACapacity Anode MaterialConversionLayered Double Hydroxide
researchProduct

Effect of Impregnation and Activation Conditions of Al2O3/CuO Supported Monolith Catalysts in the Reduction of NO

1979

Reduction of NO in the presence of CO and Ar was examined on two series of monolithic sheets carrying an active CuO/Al 2 O 3 layer. In the impregnation procedure the ratio of Al 2 O 3 to CuO was varied in a wide range. The texture of the layer and the dispersion of CuO therein was controlled by mercury porosimetry, scanning electron microscopy and secondary ion mass spectrometry (SIMS). It could be established that the surface concentration of CuO determined by SIMS measurements is the most decisive quantity of the catalyst correlating linearly with the conversion of NO.

Secondary ion mass spectrometrygeographygeography.geographical_feature_categoryScanning electron microscopeChemistryAnalytical chemistryPorosimetryTexture (crystalline)MonolithDispersion (chemistry)Layer (electronics)Catalysis
researchProduct