Search results for "layer"

Technical Note:Study of the Cl−-Induced Breakdown of the Passive Layer on Steel

1991

Abstract The Cl−-induced breakdown of the passive layer on a standard steel has an induction time that increases in a nearly linear fashion with the previous holding time (at the passivation potent...

Effect of the surface stoichiometry on the interaction of Mo with TiO2 (110)

2000

Abstract Molydenum has been deposited at room temperature on (110) TiO2 surfaces with different stoichiometries, roughnesses and crystallinities. Whatever the substrate preparation is, in-situ Auger electron spectroscopy (AES) and X-ray photoelectron spectroscopy (XPS) studies as well as ex-situ atomic force microscopy (AFM) and reflexion high-energy electron diffraction (RHEED) studies reveal a Stranski–Krastanov growth mode: the completion of three monolayers followed by islands growth is observed in every case. The three monolayers are always composed of amorphous molybdenum oxide with an oxidation state of molybdenum less than IV. The oxidation of the molybdenum layers generates Ti3+ an…

Influence of the passive film properties and residual stresses on the micro-electrochemical behavior of duplex stainless steels

2010

In the present paper, the chemical composition of passive films formed on both phases of two types of duplex stainless steels (UNS S31803 and UNS S32304) is determined at the micro-scale using Auger electron spectroscopy (AES). Samples were either mechanically polished (down to diamond pastes) or electrochemically etched in acidic solutions. The micro-electrochemical behavior of samples was then determined in sodium chloride media by means of the electrochemical micro-cell technique (capillary diameters of 30 μm). The results obtained were analyzed considering the passive film chemical composition. Quantitative relationships between electrochemical parameters and the distribution of chromiu…

Influence of preoxidation on the corrosion of steels in liquid lead-bismuth eutectic

2004

Abstract Oxidation studies of martensitic/ferritic and austenitic steels have been conducted in static lead bismuth eutectic (LBE). Samples were preoxidized in an air/H2O gas mixture prior to immersion in LBE. Preoxidation films grown on HT-9 at 800°C for 48 h had a bilayer structure, an outer Fe-rich layer, and an inner Cr-rich layer. Glancing angle x-ray diffraction data found that two distinct structures were present in this oxide: Fe1+xCr2−xO4 spinel (cubic, face-centered cubic [fcc]) and (Cr,Fe)2O3 (rhombohedral, corundum). Magnetite formation (Fe3O4) was ruled out. Immersion in LBE resulted in the growth of an Fe-rich film on top of the preoxidation layer. It was concluded that the gr…

The influence of thin hard coatings on frictional behaviour in the orthogonal cutting process

2000

New knowledge about the tribological response deriving from the interaction of the substrate/coating-chip system, with special attention to the orthogonal cutting process when chatter-free end turning using natural contact tools, is developed. In order to evaluate the frictional behaviour of this process under modified contact conditions, experimental investigations including the contact temperature, the contact loads, friction and the frictional heat flux per unit area were carried out. In contrast to the most obvious approach, the coefficient of sliding friction versus the cutting speed, the contact temperature, the normal pressure and the interface control factor is considered. A number …

Authentication of phacelia honeys (Phacelia tanacetifolia) based on a combination of HPLC and HPTLC analyses as well as spectrophotometric measuremen…

2019

Abstract The growing interest in the quality of honey affects customer preferences and consumption trends. Generally, monofloral honeys are more expensive than multifloral honeys, and the price strictly depends on its botanical origin. The increasing popularity of a variety of monofloral brands has led to the increasing number of adulterations and therefore for the need to develop new analytical methods for assessing honey authenticity. The purpose of the present study was to develop a method for the authentication of phacelia honeys on the basis of HPLC and HPTLC analyses and spectrophotometry. The results obtained by spectrophotometric analysis indicated significant differences only betwe…

Attacks Against the WAP WTLS Protocol

1999

The WAP WTLS protocol was designed to provide privacy, data integrity, and authentication for wireless terminals. The protocol is currently being fielded, and it is expected that the protocol will be contained in millions of devices in a few years.

MZ-35, a new layered pentasil borosilicate synthesized in the presence of large alkali cations

2013

Abstract A new layered borosilicate has been synthesized in the presence of cesium and sodium cations and its structure has been solved by a combination of automated diffraction tomography (ADT) and X-ray powder diffraction (XRPD). MZ-35 has a composition NaCs 2 [BSi 7 O 16 (OH) 2 ](OH) 2 ·4H 2 O and features space group P-4m2. The unusually small unit cell ( a 7.3081 A, c 10.7520 A) is shared by two random-stacked configurations of the structure: a network of connected pentasil units related to the layer of RUB-18 and a bidimensional checkerboard of intersecting ladders of 4-membered rings. The two configurations are related by the simple face-sharing inversion of a hydroxyl-bearing tetrah…

Oscillatory Changes of the Heterogeneous Reactive Layer Detected with the Motional Resistance during the Galvanostatic Deposition of Copper in Sulfur…

2015

Metallic copper was galvanostatically deposited on quartz|gold resonant electrodes by applying a constant current in a 0.5 M CuSO4/0.1 M H2SO4 aqueous solution. Galvanostatic copper deposition is one of the best methodologies to calibrate the electrochemical quartz crystal microbalances (EQCM), a gravimetric sensor to evaluate changes in mass during the electrochemical reactions through the Sauerbrey equation. The simultaneous measurement of mass, current density, and motional resistance by an EQCM with motional resistance monitoring allows us to characterize the processes occurring on the electrode surface and at the interfacial regions with unprecedented detail. During the galvanostatic c…

1994

Liquid crystalline side chain polymers containing photoreactive azobenzene chromophores in the dark-adapted trans form and phenylbenzoate groups as co-mesogens have been prepared and investigated as monomolecular layers at the water/air interface and as multilayer assemblies deposited onto solid supports by the Langmuir–Blodgett–Kuhn (LBK) technique. Pressure area isotherms at variable temperatures together with reflection absorption spectra and Brewster angle microscopic pictures have been taken and analyzed (i) to derive information about the structural order and the packing properties of the mesogenic side groups within the monolayers of different homo- and co-polymeric systems and ii) t…