Search results for "lcsh:T"
showing 10 items of 2832 documents
Surface Morphology of Single and Multi-Layer Silicon Nitride Dielectric Nano-Coatings on Silicon Dioxide and Polycrystalline Silicon
2019
Silicon nitride (Si3N4) in a form of single and multi-layer nanofilms is proposed to be used as a dielectric layer in nanocapacitors for operation in harsh environmental conditions. Characterization of surface morphology, roughness and chemical bonds of the Si3N4 coatings has an important role in production process as the surface morphology affects the contact surface with other components of the produced device. Si3N4 was synthesized by using low pressure chemical vapour deposition method and depositing single and multi-layer (3 – 5 layers) nanofilms on SiO2 and polycrystalline silicon (PolySi). The total thickness of the synthesized nanofilms was 20 – 60 nm. Surface morphology was investi…
Volume Changes in Filled Rubber Under Uniaxial Cyclic Loading
2011
Styrene-butadiene rubber, neat and filled with different silica content was investigated under uniaxial cyclic loading under a constant crosshead speed, with increasing deformation amplitude in subsequent loading cycles. Rubber was investigated in order to evaluate the reversibility of structure rearrangements, occurring in rubber when subjected to cyclic loading. Volume uniformly increases with growing strain and shows hysteresis at unloading. After complete unloading, no residual strain changes are observed. These data are in good conformity with the data of density measurements, which were made on specimens before and after the tests. By correlating data, obtained from volume changes and…
“SmartGlass” Obstacles for Dynamic Inducing of Light Scattering in Vision Research Experiments
2017
We describe a technique that allows control of visual stimuli quality through the use of a setup with a polymer dispersed liquid crystal (PDLC) film positioned in the optical pathway of one or both human eyes. Nowadays, PDLC films allow alteration of the resolution and contrast limits of the transmitted light due to continuous change in the light scattering that is obtained by the application of an AC electrical field. In our experimental setup, the use of a wide-aperture up to area of 20 x 15 cm2 PDLC sheet is combined with a flat-screen PC display or with a modified display emission block without its interference filter unit and with an installed individually controllable colored light-em…
Application of Ge Nanowire for Two-Input Bistable Nanoelectromechanical Switch
2013
Recently, several research groups presented bistable two-terminal nanoelectromechanical switches based on individual single-clamped active element. All presented devices had one input electrode. Similar devices having two or more input electrodes have not been yet investigated. In this work we present the two-input bistable controlled nanoelectromechanical switch based on an individual single-clamped Ge nanowire. The switch is realised using in-situ SEM technique and operating due to balancing of electrostatic, adhesion and elastic forces. The operation conditions of the device are investigated and presented. The advantages and drawbacks of the device are discussed. DOI: http://dx.doi.org/1…
Augmentation of weld penetration by flux assisted TIG welding and its distinct variants for oxygen free copper
2021
Abstract A comparative study to investigate the influences of single component fluxes on the depth-to-width ratio (DWR) of oxygen free copper was carried out with novel variants of tungsten inert gas (TIG) welding namely Activated TIG (A-TIG), Flux Bounded TIG (FB-TIG) and Flux Zoned TIG (FB-TIG) processes. The experiments to identify the fluxes delivering the higher DWRs in A-TIG welding among thirteen distinct fluxes were followed by the trials with FB-TIG and FZ-TIG employing those identified DWR fluxes. The fluxes which outperformed with all the techniques were MoO3 & MgO. Reversed Marangoni and arc constriction mechanisms were perceived to be opt for such an increase in DWR. Metallurgi…
Study of phase transition in Bi3TiNbO9-BaBi2Nb2O9 ceramics
2016
Abstract The subject of the paper is lead free bismuth layer structure oxides (1-x)Bi3TiNbO9-xBaBi2Nb2O9 (x=0; 1; 2; 3 mol). The influence of Bi3TiNbO9/BaBi2Nb2O9 ratio on dielectric and structural properties was studied in a wide range of temperatures. Change in the ratio causes a decrease in the maximum value of dielectric permittivity and shifts the temperature of ε’max to low values, leading to linear decreasing of average grain size and linear increasing of ceramics density. These results indicate an augment of the packing degree and the participation of pores are significantly decreased with the increase of BaBi2Nb2O9 compound intake. Moreover, for 0.7Bi3TiNbO9-0.3BaBi2Nb2O9 ceramics …
Wo3 and ionic liquids: A synergic pair for pollutant gas sensing and desulfurization
2020
This review deals with the notable results obtained by the synergy between ionic liquids (ILs) and WO3 in the field of pollutant gas sensing and sulfur removal pretreatment of fuels. Starting from the known characteristics of tungsten trioxide as catalytic material, many authors have proposed the use of ionic liquids in order to both direct WO3 production towards controllable nanostructures (nanorods, nanospheres, etc.) and to modify the metal oxide structure (incorporating ILs) in order to increase the gas adsorption ability and, thus, the catalytic efficiency. Moreover, ionic liquids are able to highly disperse WO3 in composites, thus enhancing the contact surface and the catalytic abilit…
Investigations of Latvian Illite/Kaolinite Clays Irradiated Under Action of Accelerated Electrons
2019
Natural clay is a perspective material for application as sorbents for wastewater treatment as well as for sorption of radionuclides, where the properties of the clays can be changed under influence of ionizing radiation. For application of Latvian illite/kaolinite clays for isotope sorption it is important to characterize the physic-chemical properties of pre-prepared air dried clays. Two fractions of the illite clays were selected. A fraction with grain size 100 μm (SiO2 content 60.9 ± 1.5 wt.%, specific surface area 35 m2/g) and a sand free fraction – 2 μm (SiO2 47.7 ± 1.9 wt.%, specific surface area 38 m2/g). Selected fractions were irradiated with accelerated electrons (5 MeV, ELU-4, S…
Application of Tuning Fork Sensors for In-situ Studies of Dynamic Force Interactions Inside Scanning and Transmission Electron Microscopes
2012
Mechanical properties of nanoscale contacts have been probed in-situ by specially developed force sensor based on a quartz tuning fork resonator (TF). Additional control is provided by observation of process in scanning electron microscope (SEM) and transmission electron microscope (TEM). A piezoelectric manipulator allows precise positioning of atomic force microscope (AFM) probe in contact with another electrode and recording of the TF oscillation amplitude and phase while simultaneously visualizing the contact area in electron microscope. Electrostatic control of interaction between the electrodes is demonstrated during observation of the experiment in SEM. In the TEM system the TF senso…
Structural characterization and optical constants of p-toluene sulfonic acid doped polyaniline and its composites of chitosan and reduced graphene-ox…
2020
Para-Toluene sulfonic acid doped polyaniline (PANI), PANI/chitosan composites, PANI/reduced graphene-oxide composites and a ternary composite comprising of PANI, chitosan and reduced graphene-oxide have synthesised via oxidative polymerisation of aniline by Ammonium peroxydisulfate (APS). FTIR, XRD, FESEM and UV-VIS techniques were performed for the confirmation of the successful synthesis. The fundamental optical parameters such as, complex refractive index, complex dielectric constants and optical conductivity of the PANI and the composites were investigated in the UV-VIS-NIR range. The results show a clear dependence on the constituent component such as sulphur as well as the absorbance …