Search results for "lignin"
showing 10 items of 149 documents
Characterization of a new natural fiber from Arundo donax L. as potential reinforcement of polymer composites.
2013
Abstract The aim of this paper is to study the possibility of using of Arundo donax L. fibers as reinforcement in polymer composites. The fibers are extracted from the outer part of the stem of the plant, which widely grows in Mediterranean area and is diffused all around the world. To use these lignocellulosic fibers as reinforcement in polymer composites, it is necessary to investigate their microstructure, chemical composition and mechanical properties. Therefore, the morphology of A. donax L. fibers was investigated through electron microscopy, the thermal behavior through thermogravimetric analysis and the real density through a helium pycnometer. The chemical composition of the natura…
Sustainable electroorganic synthesis of lignin-derived dicarboxylic acids
2020
The oxidative ring opening of lignin-derived alkylated cyclohexanols to bio-based alkylated dicarboxylic acids is successfully performed by an electrocatalytic conversion. To establish this transformation as a green method, we developed a simple protocol for the anodic oxidation at nickel oxide-hydroxide (NiOOH) foam anodes in caustic soda in both a batch and flow electrolysis approach.
Highly selective generation of vanillin by anodic degradation of lignin: a combined approach of electrochemistry and product isolation by adsorption
2015
The oxidative degradation of lignin into a variety of valuable products has been under investigation since the first half of the last century. Especially, the chance to claim this cheap, abundant and renewable source for the production of the important aroma chemical vanillin (1) was one of the major driving forces of lignin research. So far most of the developed methods fail in technical application since no viable concept for work-up is included. This work represents a combined approach of electrochemical conversion of Kraft lignin and product recovery by adsorption on a strongly basic anion exchange resin. Electrolysis conditions are optimized regarding reaction temperatures below 100 °C…
High-Performance Liquid Chromatographic Study on Oxidation Products of Lignin and Humic Substances
1991
We describe a convenient method of preparing samples and characterizing the mixture of degradation products obtained from alkaline cupric oxide oxidation of water samples containing lignin and humic substances. The method was applied to one unpolluted humic water sample and a total mill effluent of a kraft pulp mill. The fractions (Mr > 1000) obtained by ultrafi1tration were oxidized and the products (mixtures of degradation products) were analyzed by reversed-phase high-performance liquid chromatography (Spherisorb 5 ODS column). Acetonitrile-0.01 M phosphate buffer (pH 2) was used as the eluent in a gradient system and UV (set at 280 nm) as the detection system. Differences in the …
PURIFICATION OF HARDWOOD-DERIVED AUTOHYDROLYSATES
2012
Carbohydrate-containing hydrolysates (1.1 to 14.9% of wood dry matter) obtained from autohydrolysis (at 130 to 150°C for 30 to 120 minutes) of birch (Betula pendula) chips prior to pulping were purified with respect to non-carbohydrate materials, without carbohydrate losses, either by ethyl acetate extraction or XAD-4 resin treatment. In the former case, about 50% of lignin and practically all the furanoic compounds (2-furaldehyde and 5-(hydroxymethyl)furfural) could be removed, whereas in the latter case, the corresponding amounts were about 30% and 50 to 90%, respectively. A partial recovery of various unsaturated impurities is of importance, because they may act as inhibitors when bioche…
Evaluation of biodegradation of nonylphenol ethoxylate and lignin by combining toxicity assessment and chemical characterization.
2009
Abstract The aerobic biodegradation of commercial nonylphenol ethoxylate (NPE) mixture and alkali lignin was studied using the OECD headspace test accompanied by the simultaneous measurement of ecotoxicity directly from the biodegradation liquors and by the follow-up of the chemical composition of the studied chemicals. NPE degradation was dependent on the inoculum source: approximately 40% of NPE was mineralized into CO2 during the 4-week experiment when inoculum from Helsinki City wastewater treatment plant (WWTP) was used, and only 12% was mineralized when inoculum from Jyvaskyla City WWTP was used. Chemical analyses revealed a shift in the ethoxylate chain length from longer to shorter …
Lignin from steam‐exploded wood as binder in wood composites
2010
A study demonstrating the approach of zero‐waste technologies, a component of the Zero Emissions concept, and using lignin extracted from steam‐exploded wood as adhesive in hot‐pressed fibre boards and plywood to substitute phenol‐formaldehyde resins is reported. Properties of sample boards containing different amount of lignin adhesive are compared between themselves and with the EU standards for fibre boards. A strong correlation of density and form stability under humid conditions with the lignin content is found. Results of testing mechanical properties of the boards suggest that effect of lignin on mechanical strength depends on the size of particles and hot‐pressing temperature. Steam…
Two-stage anaerobic digestion of tomato, cucumber, common reed and grass silage in leach-bed reactors and upflow anaerobic sludge blanket reactors
2010
Abstract Anaerobic digestion of tomato, cucumber, common reed and grass silage was studied in four separate two-stage reactor configuration consisting of leach bed reactor (LBR) and upflow anaerobic sludge blanket reactor (UASB). LBR studies showed that COD solubilization for cucumber and grass silage was higher (50%) than tomato (35%) and common reed (15%). Results also showed that 31–39% of initial TKN present in tomato and cucumber was solubilized in the leachates and 47–54% of the solubilized TKN was converted to NH4-N. The corresponding values for common reed and grass silage were 38–50% and 18–36%, respectively. Biomethanation of the leachates in UASB reactors resulted in methane yiel…
Multivariate Correlation between Analytical Data for Various Organics Dissolved during Autohydrolysis of Silver Birch (Betula pendula) Chips and Trea…
2014
Autohydrolysis pre-treatments were performed for the production of hemicellulose-rich autohydrolysates from silver birch (Betula pendula) chips prior to chemical pulping. Pre-treatment conditions were varied with respect to time (from 30 to 120 min) and temperature (130 and 150 °C), covering a P-factor range from 10 to 238. Hydrolysates were analyzed in terms of carbohydrates, lignin, volatile organic acids, and furanoic compounds. The analytical data were subjected to various chemometric techniques to establish the relationships between dissolved organic components, hardwood and softwood used in the experiments, and applied pre-treatment conditions. Using this method, differences between t…
The closure of water circuits by internal thermophilic (55 and 70�C) anaerobic treatment in the thermomechanical pulping process
1997
The suitability of an internal thermophilic anaerobic treatment system for closing the water circuits in thermomechanical pulp (TMP) production was studied. The dissolution of wood organics in the water circuit was simulated by hot disintegration of TMP pulp, while the water system closure was simulated by repeated hot disintegration of TMP pulp with recirculated water. The upflow anaerobic sludge blanket (UASB) reactors were started at 55 and 70°C with mesophilic inoculum, and stable performances were established within 60 days at both temperatures. Closing the water circuits without internal treatment rapidly resulted in increased chemical oxygen demand (COD) in the recirculated water. In…