Search results for "liquid"
showing 10 items of 4351 documents
Liquid–liquid equilibria of 4-methyl-2-pentanone+1-propanol or 2-propanol+water ternary systems: Measurements and correlation at different temperatur…
2014
Abstract In this work, experimental liquid–liquid equilibria data of the systems 4-methyl-2-pentanone + 1-propanol + water and 4-methyl-2-pentanone + 2-propanol + water are presented. The liquid–liquid equilibria of both systems have been measured at 283.2 and 323.2 K. The NRTL and UNIQUAC models were successfully applied to fit the data for both ternary systems. The binodal lines were compared to the values predicted by the UNIFAC-LLE and UNIFAC models. Moreover, the solvent capability of 4-methyl-2-pentanone was checked in order to separate the azeotropic mixtures formed by propanol's and water.
Measurements and correlation of liquid–liquid equilibria of 4-methyl-2-pentanone+ethanol+water and 4-methyl-2-pentanone+n-butanol+water ternary syste…
2012
Abstract In this work, experimental liquid–liquid equilibria data of the systems 4-methyl-2-pentanone + ethanol + water and 4-methyl-2-pentanone + n-butanol + water are presented. The liquid–liquid equilibria of both systems have been measured between 283.2 and 323.2 K. The NRTL and UNIQUAC models were applied to fit the data for both ternary systems. The interaction parameters obtained from both models successfully correlated the equilibrium compositions. The binodal lines were compared to the values predicted by the UNIFAC-LLE and UNIFAC models. Moreover, the solvent capability of 4-methyl-2-pentanone was checked in order to separate these azeotropic mixtures alcohol + water.
Determination of phenytoin in plasma by molecularly imprinted solid-phase extraction.
2001
Abstract A molecularly imprinted polymer (MIP) using phenytoin as template and methacrylamide as the functional monomer was prepared. The selectivity was measured by comparing capacity factors of phenytoin and other structurally related compounds. The polymer was evaluated as a selective sorbent in molecularly imprinted solid-phase extraction (MISPE). Several washing solvents were tested to study their ability to disrupt the non-specific interactions occurring between the sample and the polymer matrix and the role of water in the recognition process was also investigated. It was shown that the key step of successful sample extraction is the right choice of the washing solvent. Plasma sample…
A class-selective immunoassay for simultaneous analysis of anilinopyrimidine fungicides using a rationally designed hapten
2017
he development of multianalyte immunoassays constitutes a main research issue in the field of bioanalytical techniques. In the present study, class-specific antibodies against the three members of the anilinopyrimidine family of fungicides (pyrimethanil, cyprodinil and mepanipyrim) were raised by using a bioconjugate of a rationally designed hapten [5-(6-methyl-2-(phenylamino)pyrimidin-4-yl)pentanoic acid]. Highly sensitive immunoassays were developed for the generic determination of these compounds, using the competitive enzyme-linked immunosorbent assay (ELISA). Particularly, a direct antibody-coated competitive ELISA afforded identical sensitivity for the three anilinopyrimidines, with I…
Application of a low transition temperature mixture for the dispersive liquid–liquid microextraction of illicit drugs from urine samples
2021
© 2021 by the authors.
Automated pre-column derivatization of amines in biological samples with dansyl chloride and with or without post-column chemiluminescence formation …
1999
On-line automation of two different liquid chromatographic procedures, a pre-column derivatization system and a pre- and post-column system, in order to generate chemiluminescence is reported. Dansyl chloride (Dns-Cl) was used as a pre-column reagent to form fluorophores and bis(2,4,6-trichlorophenyl) oxalate (TCPO) and hydrogen peroxide (H2O2) as a post-column reagent to generate chemiluminescence. This procedure is based on the employment of a primary column packed with C18 material inserted in a multi-dimensional assembly for sample clean-up and derivatization with Dns-Cl. The dansyl derivatives formed are transferred and separated in a LiChrospher 100 RP18 analytical column (125 x 4 mm …
Combination of supported liquid membrane and solid-phase extraction for sample pretreatment of triazine herbicides in juice prior to capillary electr…
2002
A possibility of a combination of supported liquid membrane (SLM) and solid-phase extraction (SPE) for the determination of atrazine at microgram level in different type of fruit juices is presented. In comparison to SPE extraction from juice samples, the application of SLM-SPE enrichment provides much cleaner extracts and the possibility of lowering the limit of detection as low as 30 microg/l. However, it was also shown that by appropriate manipulation of SLM extraction conditions mainly flow-rate of donor phase and volume ratio between donor and acceptor phase, the level of detection can be further decreased to 10 microg/l. The results suggest that the application of SLM extraction prior…
A sustainable on-line CapLC method for quantifying antifouling agents like irgarol-1051 and diuron in water samples: Estimation of the carbon footpri…
2016
In this work, in-tube solid phase microextraction (in-tube SPME) coupled to capillary LC (CapLC) with diode array detection has been reported, for on-line extraction and enrichment of booster biocides (irgarol-1051 and diuron) included in Water Frame Directive 2013/39/UE (WFD). The analytical performance has been successfully demonstrated. Furthermore, in the present work, the environmental friendliness of the procedure has been quantified by means of the implementation of the carbon footprint calculation of the analytical procedure and the comparison with other methodologies previously reported. Under the optimum conditions, the method presents good linearity over the range assayed, 0.05-1…
New biocides based on imidazolinium-functionalised hybrid mesoporous silica nanoparticles
2022
Here, we report the development of a new biocide based on hybrid mesoporous silica nanoparticles (MSN). The MSN was synthesized by condensation method in emulsion followed by grafting with two different silylated ionic liquid moieties, namely butyl imidazolinium bromide and imidazolinium propansulfonate betaine. Features of nanoparticles were characterized by Thermogravimetry, Infrared and ss-NMR Spectroscopy, and Transmission Electron Microscopy. The antibacterial properties were tested against a Gram-positive bacterial strain previously isolated from artefacts of interest in the field of Cultural Heritage. Interestingly, the hybrid material presents an antibacterial activity higher than i…
A miniaturized method for estimating di(2-ethylhexyl) phthalate in bivalves as bioindicators.
2012
This work has developed a miniaturized method based on matrix solid phase dispersion (MSPD), using C18 as dispersant and acetonitrile-water as eluting solvent, for the analysis of di(2-ethylhexyl) phthalate (DEHP) in biota samples by capillary liquid chromatography coupled to in-tube solid phase microextraction and diode array detection. Recovery studies showed that the combination of C18-Florisil® was optimal using low amount of samples (0.1 g) and with low volumes of acetonitrile-water (2.6 mL 1:3.25, v/v). The sample is processed in less than 30 min, no evaporation step is required. The proposed method was applied to the analysis of DEHP in mussels and of the coastal waters in which they…