Search results for "loading"
showing 10 items of 233 documents
Risk Based Inspection Planning for Fatigue Damage in Offshore Steel Structures
2015
High fatigue reliability is one of the most important design criteria for welded offshore steel structures. Due to repeated wave loading fatigue cracks may initiate and grow in welded joints that are important for the integrity of these structures. The present paper presents the methodology and the practical calculations for risk based inspection planning for fatigue cracks in welded details. Due to the uncertainty in the variables involved in the problem the planning has to be carried out by stochastic modeling and risk based assessments. Scatter in potential crack growth has to be analyzed by applied probabilistic facture mechanics and the uncertainty in the performance of the actual insp…
Theoretical approaches for modelling buckling effects in rebars of RC members
2017
Buckling of longitudinal bars in reinforced concrete (RC) members is definitely a critical issue in framed structures subjected to seismic loads. Second order effects can affect the compressive stressâstrain law of steel bars, influencing ductility calculations of RC structures. Moreover, literature studies show that buckling can occur over a length wider than stirrupsâ pitch (global buckling mode), involving more stirrups and inducing large deflections in the bar. If the critical length is not carefully estimated, stirrupsâ failure can occur, causing also the sudden loss of confining effects in concrete. This paper presents the results of different approaches for calculating the crit…
Application of an energy model for fatigue life prediction of construction steels under bending, torsion and synchronous bending and torsion
2003
Abstract The paper contains a mathematical model of the material’s behaviour under cyclic loading taking into account the dynamics of the fatigue process, including the number of cycles to failure, induced by the mean stress value. The coefficients in the proposed model have been obtained from experimental tests under symmetrical and nonsymmetrical loading (with the stress ratio R =0). The proposed model has been used in order to modify an energy criterion with the aim of accounting for the influence of the mean stress on the fatigue life. The fatigue tests have been performed for structural steels 10HNAP and 18G2A subjected to cyclic bending, torsion and synchronous bending with torsion, b…
Mass loading, distribution, and removal of antibiotics and antiretroviral drugs in selected wastewater treatment plants in Kenya.
2020
The discharge of active pharmaceutical ingredients (APIs) into the aquatic environment from wastewater effluents is a concern in many countries. Although many studies have been conducted to evaluate the APIs removal efficiencies and emissions to the environment in wastewater treatment plants (WWTPs), most of these studies considered the aqueous and sludge phases, disregarding the suspended particulate matter (SPM) phase. To try to understand the role of the SPM, the occurrence of five most common antibiotics and three antiretroviral drugs (ARVDs) commonly used in Kenya were investigated in this study. APIs partitioning and mass loading in influents and effluents of three different WWTPs: tr…
Aerobic granular sludge treating anaerobically pretreated brewery wastewater at different loading rates.
2020
Abstract In this study, three different aerobic granular sludge (AGS) reactors fed with anaerobically pre-treated brewery wastewater were studied. The AGS reactors were operated under different conditions including organic loading rates (OLR) between 0.8 and 4.1 kg COD m−3 d−1, C:N:P ratios (100:10:1 and 100:6:1) and food to microorganism ratios (F/M) between 0.8 ± 0.6 and 1.2 ± 0.5 and 0.9 ± 0.3 kg-TCOD kg-VSS−1d−1. Stable granulation was achieved within two weeks and the size of the granules increased according to the OLR applied. The results indicated that low C:N:P and F/M ratios were favorable to achieve stable aerobic granules in the long term. The carbon removal rate was load-indepen…
Simultaneous nitrogen and organic carbon removal in aerobic granular sludge reactors operated with high dissolved oxygen concentration
2013
Simultaneous nitrification and denitrification (SND) together with organic removal in granules is usually carried out without Dissolved Oxygen (DO) concentration control, at ‘‘low DO’’ (with a DO 7–8 mg/L, during feast and famine conditions respectively). In particular, different strategies of cultivation and several organic and nitrogen loading rate have been applied, in order to eval- uate the efficiencies in SND process without dissolved oxygen control. The results show that, even under conditions of high DO concentration, nitrogen and organic matter can be simultaneously removed, with efficiency >90%. Nevertheless, the biological conditions in the inner layer of the granule may change sig- …
The effect of organic loading rate and retention time on hydrogen production from a methanogenic CSTR.
2011
Abstract The possibility of shifting a methanogenic process for hydrogen production by changing the process parameters viz., organic loading rate (OLR) and hydraulic retention time (HRT) was evaluated. At first, two parallel semi-continuously fed continuously stirred tank reactors (CSTR) were operated as methanogenic reactors (M1 and M2) for 78 days. Results showed that a methane yield of 198–218 L/kg volatile solids fed (VS fed ) was obtained when fed with grass silage at an OLR of 2 kgVS/m 3 /d and HRT of 30 days. After 78 days of operation, hydrogen production was induced in M2 by increasing the OLR from 2 to 10 kgVS/m 3 /d and shortening the HRT from 30 to 6 days. The highest H 2 yield …
“Functional Poly(ethylene glycol)”: PEG-Based Random Copolymers with 1,2-Diol Side Chains and Terminal Amino Functionality
2010
A series of poly(ethylene glycol-co-isopropylidene glyceryl glycidyl ether) (P(EO-co-IGG)) random copolymers with different fractions of 1,2-isopropylidene glyceryl glycidyl ether (IGG) units was synthesized. After acidic hydrolysis a new type of "functional PEGs", namely poly(ethylene glycol-co-glyceryl glycerol) (P(EO-co-GG)) was obtained. Using an initiator that releases a terminal amino moiety after deprotection, functional end groups with orthogonal reactivity to the in-chain groups were obtained. All polymers showed narrow molecular weight distributions (1.07-1.19), and control of the molecular weights was achieved in the range 5000-30 000 g/mol. Random incorporation of both comonomer…
Effect of FRP strengthening on the flexural behaviour of calcarenite masonry walls
2017
The use of fiber-reinforced polymers (FRP) for structural strengthening has become increasingly popular in recent years. Several applications of FRP have been proposed and applied, depending on the target of the technique, kind and/or material of the structural member. In particular, because of their great tensile strength, FRP materials are commonly used to enhance the out-of-plane behaviour of masonry walls, allowing to increase their strength, ductility and improving safety against overturning. For these reasons, FRP laminates are often applied in vulnerable ancient buildings in seismic areas to reinforce façades and walls with poor structural features. However, some issues arise when a…
O2 Loaded Germanosilicate Optical Fibers: Experimental In Situ Investigation and Ab Initio Simulation Study of GLPC Evolution under Irradiation
2022
International audience; In this work we present a combined experimental and ab initio simulation investigation concerning the Germanium Lone Pair Center (GLPC), its interaction with molecular oxygen (O2), and evolution under irradiation. First, O2 loading has been applied here to Ge-doped optical fibers to reduce the concentration of GLPC point defects. Next, by means of cathodoluminescence in situ experiments, we found evidence that the 10 keV electron irradiation of the treated optical fibers induces the generation of GLPC centers, while in nonloaded optical fibers, the irradiation causes the bleaching of the pre-existing GLPC. Ab initio calculations were performed to investigate the reac…