Search results for "masonry"
showing 10 items of 164 documents
Experimental and analytical response of masonry elements under eccentric vertical loads
2005
The flexural behaviour of masonry rectangular cross-sections is studied in order to characterize the mechanical behaviour of structural elements under axial eccentric loads by means of a proper law. First the experimental response of walls under vertical centred loads is observed and a stress-strain law depending on two parameters is given in order to fit the experimental results. Subsequently the behaviour of walls nominally equal to the walls mentioned before is investigated under eccentric vertical loads, and the response is observed in terms of moment-curvature relation. To this point a comparison is made between the moment-curvature response obtained experimentally and the moment-curva…
Experimental Tests on Typical Masonry of Messina Area (Italy) Retrofitted with CAM: Full Scale Panels
2014
The present paper focuses on an in-situ testing campaign recently developed in the Messina area, Italy, aiming at the assessment of the in-plane shear behaviour of traditional masonry retrofitted with the innovative CAM system (a system of 3D pre-tensioned stainless steel ties). The typical masonry of Messina area, is characterised by low mechanical properties, both for its texture and for the bad quality of mortar, as well as lack of transverse connections. The high seismic risk characterizing the zone, amplifies the need for in-plane strengthening and transverse connections improving. The CAM system, Masonry Active Ties or Manufact Active Confining, allows to realise a 3D pre-tensioned ty…
Advanced Strategies and Materials for Reinforcing Normal and Disturbed Regions in Brick Masonry Columns
2016
This work presents the results of an experimental investigation on the behavior of 42 solid clay brick masonry columns internally strengthened by fiber-reinforced polymer (FRP) fabrics or stainless steel grids placed in horizontal mortar joints. In some cases, every course, and in other cases, alternate courses were reinforced with steel grids, carbon, and basalt FRP fabrics. Monotonic compressive loading tests were carried out under concentric and eccentric loads. Eccentric tests were carried out by loading the specimens on a reduced area with respect to the entire cross section, producing a disturbed region (D-region). A detailed characterization of the constituent materials was made expe…
Experimental investigation on the effect of mortar grade on the compressive behaviour of FRCM confined masonry columns
2018
Abstract The use of Fiber Reinforced Cementitious Mortar (FRCM) systems for structural retrofitting of masonry structures has become increasingly popular in the last years, due to the capability of this technique in overcoming some of the drawbacks related to the adoption of resin-based composites. Recent studies investigated on the effect of FRCM wraps on the compressive behaviour of concrete members and demonstrated as the application of mortar-based composites allows increasing the strength and, above all, the ductility of the column. The main difference with FRP confined columns is related to the different post-peak behaviour, characterized by a softening branch. Differently, few studie…
Comparative experimental analysis on the compressive behaviour of masonry columns strengthened by FRP, BFRCM or steel wires
2017
Abstract In the last decade, several studies have investigated the application of Fibre Reinforced Polymer (FRP) wraps to masonry piers in order to provide a confinement effect and enhance compressive strength and ductility. Although this technique has proved to be quite effective, various drawbacks arise when organic resins are used to bind fibres. To solve these problems, different techniques have been developed to be used as alternative methods for enhancing the structural performances of weak masonry columns. Among these, the use of Basalt Fibre Reinforced Cementitious Matrix (BFRCM) wrapping, or the application of steel wires at mortar joints. This paper presents the results of an expe…
Brick Masonry Columns Externally Wrapped with Steel Wires under Concentric and Eccentric Loads
2017
This paper discusses an experimental investigation of clay brick columns that are externally strengthened by steel wire collars wrapping the horizontal mortar joints. The study aims to prove the effectiveness of the proposed strengthening technique and detect the efficiency of different numbers of steel collars. Additionally, the effect of eccentric loading is investigated. This paper proves that an analytical expression available in the previous literature can be modified to provide the strength of the equivalent homogeneous cross section in simple compression. To this aim, the biaxial strength domain of the bricks is modified to account for the lateral pressure exerted by the steel collar…
Experimental in situ behaviour of unreinforced masonry elements retrofitted by pre-tensioned stainless steel ribbons
2014
Abstract The results of in situ tests carried out on unreinforced and reinforced poor rubble masonry full-scale walls in the earthquake prone Messina (Italy) area are presented and discussed. This experimental research was aimed at the assessment of the in plane shear behaviour of ancient masonry strengthened with an innovative system for masonry and retrofitting of reinforced concrete element constituted by three-dimensional pre-tensioned stainless steel ribbons. A comparison between different strengthening configurations was made in order to characterise the behaviour of masonry panels under shear-compression load, focusing attention on the diagonal cracking failure mode. The effectivenes…
Induced Modification of Flexural Toughness of Natural Hydraulic Lime Based Mortars by Addition of Giant Reed Fibers
2020
Abstract Nowadays, there is a growing need to reduce the environmental impact generated by the use of inorganic materials for building applications. The aim of this work is to investigate the bio-lime based mortar flexural toughness improvement due to the addition of common reed fibers (Arundo donax L.) in order to evaluate their possible application as ductile eco-compatible prefabricated bricks or laying and joint mortars for masonry. Different sets of specimens were tested by varying the fiber weight content and the fiber length. Moreover, chemical treatments with Linseed Oil and Polyethylene glycol (PEG) were performed to improve the physical and mechanical properties of the fibers as w…
Masonry columns confined with fabric reinforced cementitious matrix (FRCM) systems: A round robin test
2021
Abstract The conservation and the preservation of existing masonry buildings, most of them recognized as cultural heritage, require retrofitting techniques that should reduce the invasiveness and assure reversibility and compatibility with the substrate. In this perspective, the strengthening system should be able to improve the bearing capacity of the structural member and, at the same time, to assure mechanical and material compatibility. The use of Fabric Reinforced Cementitious Matrix (FRCM) composites is now recognized to be suitable for these purposes. Indeed, the inorganic matrix has comparable properties with respect to the existing historical mortars while the fabric has relevant t…
Stainless steel grids for confinement of clay brick masonry columns
2016
This work presents the results of an experimental investigation on the behavior of 21 solid clay brick columns internally strengthened by stainless steel grids placed in the horizontal joints of mortar. This reinforcing technique can be applied as a constructive technique for new construction or as a retrofitting technique for existing structures (old structures to be reconstructed by original constructive method and internal reinforcement). Monotonic compressive loading tests were carried out under concentric and eccentric load. The effects of different numbers of steel grids and eccentricity of the external load were examined. Also, a detailed characterization of the constituent materials…