Search results for "medium"
showing 10 items of 3746 documents
Interrelations of the yeast Candida utilis and Cr(VI): metal reduction and its distribution in the cell and medium
2001
Abstract An effect of chromium(VI) ions on the growth and bioaccumulation properties of growing cells of Candida Utilis was studied. Molasses media for yeast growth containing 20 g glucose l −1 and 50+500 mg Cr(VI) l −1 were used in batch cultivation. Addition of 100 mg Cr(VI) l −1 resulted in a threefold decrease in the cell concentration, as compared with the culture grown without metal. Cr(VI) inhibited culture growth in a concentration-dependent manner, this dependence was not linear. Glucose consumption by growing cells depended on the initial Cr(VI) concentration in the medium and correlated with growth activity. No inhibitory effect of high Cr(VI) concentrations on the activity of so…
Characterization by solid-state NMR and selective dissolution techniques of anhydrous and hydrated CEM V cement pastes.
2010
International audience; The long term behaviour of cement based materials is strongly dependent on the paste microstructure and also on the internal chemistry. A CEM V blended cement containing pulverised fly ash (PFA) and blastfurnace slag (BFS) has been studied in order to understand hydration processes which influence the paste microstructure. Solid-state NMR spectroscopy with complementary X-ray diffraction analysis and selective dissolution techniques have been used for the characterization of the various phases (C3S, C2S, C3A and C4AF) of the clinker and additives and then for estimation of the degree of hydration of these same phases. Their quantification after simulation of experime…
The Micro-Shear bond strength of different cements to commercially pure titanium
2019
Background The most appropriate luting agent for attaching the prefabricated Ti-based insert of hybrid abutments to its ceramic component has not yet been determined. This study was done aimed at examining the micro-shear bond strength (μSBS) of different cements to commercially pure titanium (Cp Ti). Material and Methods A total of 100 milled cubes of Cp Ti was airborne-particle abraded using 250 μm aluminum oxide particles. Specimens were then divided into 5 groups (n=20) according to the type of resin cement used: (1) Panavia F.2, (2) Rely X U200, (3) Panavia SA LUTING Plus, (4) GC Fuji I, and (5) GC FujiCEM 2. After 24h storage, half of the samples were subjected to 5000 cycles of therm…
Influence of thickness and translucency of lithium disilicate ceramic on degree of conversion of resinous materials
2020
Background In this study was assessed the degree of conversion (DC) of amine-free resin cements light cured through lithium disilicate-reinforced ceramics at different thicknesses and translucency. Material and Methods Specimens were divided into 21 groups (n = 5) according to luting agent used: Variolink Esthetic LC (Light shade), RelyX Ultimate (A1 shade), and Filtek Z350 XT Flow (A1 shade); the ceramic translucency: low (LT) and high (HT); and the ceramic thickness: no ceramic (control), 0.5 mm, 1 mm, and 2 mm. A Teflon mold with (5 x 5 x 0.5 mm) was used to standardize the cement and over it the ceramic block from each group was placed. Set was cured using a polywave LED light (1200 mW/…
Photocatalytic Properties of Cement-Based Plasters and Paints Containing Mineral Pigments
2010
Innovative cement-based premix products for surface coating of buildings that possess photocatalytic activity arouse great interest because of the results they can achieve in reducting air pollution and maintaining aesthetics. This photoactivity is induced by a photocatalyst, titanium dioxide, that can accelerate the oxidation processes of air pollutants, particularly nitrogen oxides and volatile organic compounds, which are mainly produced by incomplete combustion of fuel and are present in urban environments through the exhaust gases of motor vehicles. Surfaces that are coated with these products acquire a self-cleaning characteristic (maintenance of original color) because the decomposi…
Shear bond strength of debonded ceramic restorations re-cemented by means of a cleaning and retreatment protocol
2019
Background As there is no standard method for re-cementing debonded partial ceramic restorations, the aim of this study was to evaluate the use of a non-invasive thermal protocol for cleaning and retreatment, and to study its influence on shear bond strength. Material and methods Twenty ceramic samples (IPS e.max CAD®) were bonded to composite cement cylinders and underwent a shear bond strength test (G1, n=20). A second group was created (G2, n=20), representing debonded restorations. To simulate debonding, the samples were artificially contaminated with composite cement. After debonding, these underwent a thermal protocol to remove remaining adhesive. After rebonding to the composite ceme…
Cleaning and retreatment protocol for a debonded ceramic restoration
2014
Objectives: The aim of this article is to propose a resin cement cleaning protocol for use before recementing a debonded restoration. Study Design: Ceramic samples were fabricated from IPS d.sign® and IPS e.max Press® and were treated with hydrofluoric acid etching (HF), or HF+silane (S), or HF+S+adhesive or HF+S+A+resin cement. All samples were placed in a furnace at 650º for one minute in order to attempt to pyrolyze the composite. Each step was examined under scanning electron microscopy (SEM). Results: When the cleaning protocol had been performed, it left a clean and retentive surface. Conclusions: If the restoration is placed in a furnace at 650º for one minute, the composite cement w…
Magnetic susceptibility and heavy metal content in dust from the lime plant and the cement plant in Opole Voivodeship
2012
Magnetic Susceptibility and Heavy Metal Content in Dust From the Lime Plant and the Cement Plant in Opole Voivodeship Until now, dust arising from lime manufacture has been considered harmless to the environment so it has been investigated marginally from the standpoint of environmental protection, especially when it came to magnetic properties and heavy metal content. The aim of the research was filling the gap in this area. The research comprised measurements of magnetic susceptibility, the content of heavy metals, reaction (pH) and specific conductivity of lime dust and also raw material and fuel used for lime production. The samples were taken from one of the lime plants located in Opol…
Diffusion in slice preparations bathed in unstirred solutions
1987
A diffusion model is described here, which allows for the estimations of drug concentration changes in porous media, such as in slice tissues of the central nervous system (CNS) bathed in unstirred solutions following abrupt changes of drug concentration. This model may be used for the interpretation of data obtained in neuropharmacological studies if (i) the diffusion coefficient of the molecules under investigation is constant within the excised tissue, (ii) drug molecules are diffusing only in the extracellular space (ECS) and are not bound by the tissue, (iii) drug molecules diffuse mainly within one dimension, (iv) the drug concentration in the bath is changed within 5 s, and (v) the b…
Characterization of cobalt pigments found in traditional Valencian ceramics by means of laser ablation-inductively coupled plasma mass spectrometry a…
2008
Abstract In this work, a comparison of the performances of laser ablation-inductively coupled plasma mass spectrometry (LA-ICPMS) and portable X-ray fluorescence (XRF) spectrometry for the characterization of cobalt blue pigments used in the decoration of Valencian ceramics is presented. Qualitative data on the elemental composition of the blue pigments obtained using both techniques show a good agreement. Moreover, the results clearly illustrate that potters utilized different kinds of cobalt pigments in different historical periods. While both techniques seem suitable for the proposed task, they show different strengths and weaknesses. Portable X-ray fluorescence spectrometry is a cheaper…