Search results for "membrane fouling"
showing 9 items of 59 documents
Sequential Batch Membrane BioReactor treating saline wastewater
2015
A sequential batch membrane bioreactor treating high strength salinity wastewater has been investigated. The salt effects on carbon and nutrient removal, fouling behaviour as well as biomass kinetics have been analysed. Salinity was increased at step of 2 g NaCl L-1 per week. The total COD removal efficiency was high (93%) along the entire experimental campaign. However, the biological contribution on the COD removal efficiency was reduced with the increase of salinity. The lowest nitrification removal efficiency (63%) was obtained at 10 g NaCl L-1 salinity due to the lower nitrifier activity. Regarding membrane fouling, the irreversible cake deposition was the predominant fouling mechanism…
The effect of hydrocarbon on a pilot plant membrane bioreactor system
2015
The paper reports the main results from an experimental gathering campaign carried out on a bench scale plant for the evaluation of hydrocarbon effect on the system performance. In particular, a membrane bioreactor (MBR) under submerged configuration was analysed. The MBR plant was fed with synthetic wastewater containing hydrocarbons. Organic carbon, hydrocarbons and ammonium removal, kinetic constants, extracellular polymeric substances (EPSs) production and membranes fouling rates have been assessed. The observed results highlighted good system performance in terms of both COD removal and nitrification, thus showing a sort of biomass adaptation to hydrocarbon. Such a result has been also…
A new integrated MBR model for wastewater treatment: sensitivity and uncertainty analysis
2017
In this study a new integrated membrane bioreactor (MBR) model is proposed. The model is able to describe the main biological processes aimed at the carbon and the nutrients (nitrogen, N and phosphorus, P) removal coupled with the soluble microbial products (SMP) formation/degradation. Furthermore, the model describes the key physical processes and the interconnection between SMP and membrane fouling. The model was calibrated by adopting data measured during the monitoring of a University Cape Town (UCT) MBR pilot plant. A sensitivity analysis allowed the reduction of the number of model FACTORs to be calibrated from 122 to 45. A good correlation between measured and simulated data was obta…
Position paper - progress towards standards in integrated (aerobic) MBR modelling.
2020
Membrane bioreactor (MBR) models are useful tools for both design and management. The system complexity is high due to the involved number of processes which can be clustered in biological and physical ones. Literature studies are present and need to be harmonized in order to gain insights from the different studies and allow system optimization by applying a control. This position paper aims at defining the current state of the art of the main integrated MBR models reported in the literature. On the basis of a modelling review, a standardized terminology is proposed to facilitate the further development and comparison of integrated membrane fouling models for aerobic MBRs. ispartof: WATER …
Impact of membrane addition for effluent extraction on the performance and sludge characteristics of upflow anaerobic sludge blanket reactors treatin…
2015
Abstract In this study, the impact of membrane incorporation for effluent extraction on the performance of an upflow anaerobic sludge blanket (UASB) reactor treating municipal wastewater was investigated in terms of system performance and sludge characteristics. A laboratory-scale system was operated in two different operational stages: (i) as a sole UASB reactor and (ii) as an anaerobic membrane bioreactor (AnMBR). Membrane incorporation induced an accumulation of fine particles and a decrease in extracellular polymeric substances (EPS), resulting in a decrease in particle size distribution (PSD) and, thus, a drop in sludge settleability. Deterioration of sludge settleability led to an inc…
Power Production from Produced Waters via Reverse Electrodialysis: A Preliminary Assessment
2022
Wastewaters generated by crude oil extraction processes, called “produced waters” (PWs), are complex solutions that contain organic compounds, mainly hydrocarbons, and often exhibit high salinity. The large amounts of PWs represent a global issue because of their environmental impact. An approach widely used in the oil industry is the reinjection of this wastewater into the extraction wells after a suitable treatment. The high salt concentration of such solutions may be used in salinity gradient technologies to produce green electricity. Among these technologies, reverse electrodialysis (RED) is one of the most promising. In this work, the application of RED for energy generatio…
Modelling biological nitrogen and phosphorus removal with soluble microbial products (SMP) production-degradation processes
2011
Over the last two decades, Membrane Bioreactors (MBR) are increasingly used for wastewater treatment. Mathematical modelling of MBR systems has played a key role in order to better explain the effect of their peculiarities. Indeed, several MBR models have been presented in literature in order to improve the knowledge on MBR systems: biological models, hybrid models which include soluble microbial product (SMP) modelling, physical models able to describe the membrane fouling and integrated models which couple the hybrid models with the physical ones. However, among the existing MBR models only few integrated models have been developed which take into account the existing relationship between…
Protein recovery as a resource from waste specifically via membrane technology : from waste to wonder
2021
Economic growth and the rapid increase in the world population has led to a greater need for natural resources, which in turn, has put pressure on said resources along with the environment. Water, food, and energy, among other resources, pose a huge challenge. Numerous essential resources, including organic substances and valuable nutrients, can be found in wastewater, and these could be recovered with efficient technologies. Protein recovery from waste streams can provide an alternative resource that could be utilized as animal feed. Membrane separation, adsorption, and microbe-assisted protein recovery have been proposed as technologies that could be used for the aforementioned protein re…