Search results for "mining"
showing 10 items of 1730 documents
Study of phase transition in Bi3TiNbO9-BaBi2Nb2O9 ceramics
2016
Abstract The subject of the paper is lead free bismuth layer structure oxides (1-x)Bi3TiNbO9-xBaBi2Nb2O9 (x=0; 1; 2; 3 mol). The influence of Bi3TiNbO9/BaBi2Nb2O9 ratio on dielectric and structural properties was studied in a wide range of temperatures. Change in the ratio causes a decrease in the maximum value of dielectric permittivity and shifts the temperature of ε’max to low values, leading to linear decreasing of average grain size and linear increasing of ceramics density. These results indicate an augment of the packing degree and the participation of pores are significantly decreased with the increase of BaBi2Nb2O9 compound intake. Moreover, for 0.7Bi3TiNbO9-0.3BaBi2Nb2O9 ceramics …
Wo3 and ionic liquids: A synergic pair for pollutant gas sensing and desulfurization
2020
This review deals with the notable results obtained by the synergy between ionic liquids (ILs) and WO3 in the field of pollutant gas sensing and sulfur removal pretreatment of fuels. Starting from the known characteristics of tungsten trioxide as catalytic material, many authors have proposed the use of ionic liquids in order to both direct WO3 production towards controllable nanostructures (nanorods, nanospheres, etc.) and to modify the metal oxide structure (incorporating ILs) in order to increase the gas adsorption ability and, thus, the catalytic efficiency. Moreover, ionic liquids are able to highly disperse WO3 in composites, thus enhancing the contact surface and the catalytic abilit…
Investigations of Latvian Illite/Kaolinite Clays Irradiated Under Action of Accelerated Electrons
2019
Natural clay is a perspective material for application as sorbents for wastewater treatment as well as for sorption of radionuclides, where the properties of the clays can be changed under influence of ionizing radiation. For application of Latvian illite/kaolinite clays for isotope sorption it is important to characterize the physic-chemical properties of pre-prepared air dried clays. Two fractions of the illite clays were selected. A fraction with grain size 100 μm (SiO2 content 60.9 ± 1.5 wt.%, specific surface area 35 m2/g) and a sand free fraction – 2 μm (SiO2 47.7 ± 1.9 wt.%, specific surface area 38 m2/g). Selected fractions were irradiated with accelerated electrons (5 MeV, ELU-4, S…
Application of Tuning Fork Sensors for In-situ Studies of Dynamic Force Interactions Inside Scanning and Transmission Electron Microscopes
2012
Mechanical properties of nanoscale contacts have been probed in-situ by specially developed force sensor based on a quartz tuning fork resonator (TF). Additional control is provided by observation of process in scanning electron microscope (SEM) and transmission electron microscope (TEM). A piezoelectric manipulator allows precise positioning of atomic force microscope (AFM) probe in contact with another electrode and recording of the TF oscillation amplitude and phase while simultaneously visualizing the contact area in electron microscope. Electrostatic control of interaction between the electrodes is demonstrated during observation of the experiment in SEM. In the TEM system the TF senso…
Structural characterization and optical constants of p-toluene sulfonic acid doped polyaniline and its composites of chitosan and reduced graphene-ox…
2020
Para-Toluene sulfonic acid doped polyaniline (PANI), PANI/chitosan composites, PANI/reduced graphene-oxide composites and a ternary composite comprising of PANI, chitosan and reduced graphene-oxide have synthesised via oxidative polymerisation of aniline by Ammonium peroxydisulfate (APS). FTIR, XRD, FESEM and UV-VIS techniques were performed for the confirmation of the successful synthesis. The fundamental optical parameters such as, complex refractive index, complex dielectric constants and optical conductivity of the PANI and the composites were investigated in the UV-VIS-NIR range. The results show a clear dependence on the constituent component such as sulphur as well as the absorbance …
Influence of Biomass Combustion Products on Element Content and Thermal Stability of Latvian Sheep Breed Wool Filter Fibres
2020
Sheep wool is natural, easy obtainable, renewable and biodegradable material with a perspective application as a sorbent in filters for purification of industrial emissions from various environmental pollutants. The element content and thermal stability of Latvian dark-headed sheep wool filter fibres was analysed and described before and after exposure to biomass combustion products. Based on the obtained results, it is concluded that the sheep wool filter fibres can sorb various gaseous combustion products, such as carbon monoxide (CO), carbon dioxide (CO2) and nitrogen oxides (NOx), however, the sorption processes of these gases are irreversible. The obtained results of total reflection X…
Photoelectrical Properties and Energetical Structure of Thin Films of Indandione Derivatives
2011
A sandwich type structure of two dimetilaminobenziliden-1,3-indandione (DMABI) derivatives placed between metal electrodes was made to investigate the photoelectrical properties of these derivatives. DMABI is an organic isolator with a wide energy gap and high quantum efficiency of the photogeneration, DMABI derivatives have received also considerable attention because of its large dipole moment and optical nonlinearities. Besides, since it is a photosensitive material, its use in solar systems is very promising. The energy gap of each material and combined system was observed from the spectral dependence of the quantum efficiency of the photoconductivity and results are compared with resul…
Caracterización de barita cubana y su reducción carbotérmica en horno de microondas
2007
The Cuban Barite (BaSO<sub>4</sub>) is characterized by X ray diffraction, chemical analysis and scanning electron microscopy. The principal components are identified and its characteristic morphology is shown. Its carbothermic reduction under microwave irradiation is carried out with the purpose of to improve the yield of this stage during the mineral transformation process in reagent of barium of diverse applications.<br><br>La barita cubana (BaSO<sub>4</sub>) se ha caracterizado por difracción de rayos X, análisis químico y microscopía electrónica de barrido. Se han identificado sus componentes mayoritarios y así mismo se muestra su morfología caracter…
Lead isotopes in biological matrices to identify potential sources of contamination: the case study of Sulcis-Iglesiente district (SW Sardinia, Italy)
2017
The Sulcis-Iglesiente district has been, until recently, one of the most important Italian polymetallic mining areas for the extraction of lead. Located close to the town of Iglesias, the San Giorgio area constitutes a dramatic example of an area affected by intense mine pollution. Epidemiological studies regarding the mining areas of Sardinia have indicated the Sulcis-Iglesiente as a typical example of how dispersion of metal can affect human health. We have chosen this peculiar area to evaluate whether a supposed prolonged and continuous exposure to high lead concentration can be detected by means of a bio-monitoring procedure that uses the analysis of human scalp hair and the measurement…
The Effect of Dopants on Sintering and Microstructure of Lead-free KNN Ceramics
2011
Lead-free potassium sodium niobate (K0.5Na0.5)NbO3 (KNN) has been prepared via conventional ceramic processing method. The influence of 0.5 wt% - 1.5 wt% MnO2 and WO3 addition on the sintering, crystallographic structure, microstructure and dielectric properties of KNN has been investigated. Optimal sintering temperatures of KNN ceramics were observed to be in the narrow interval: 1090 °C - 1110 °C for MnO2 doped KNN; 1150 °C - 1170 °C for pure KNN and doped with WO3. XRD patterns showed that all the samples have single perovskite structure with monoclinic structure. Microstructure of ceramics was changed greatly by using dopants.http://dx.doi.org/10.5755/j01.ms.17.1.251