Search results for "mortar"
showing 10 items of 99 documents
Stainless steel grids for confinement of clay brick masonry columns
2016
This work presents the results of an experimental investigation on the behavior of 21 solid clay brick columns internally strengthened by stainless steel grids placed in the horizontal joints of mortar. This reinforcing technique can be applied as a constructive technique for new construction or as a retrofitting technique for existing structures (old structures to be reconstructed by original constructive method and internal reinforcement). Monotonic compressive loading tests were carried out under concentric and eccentric load. The effects of different numbers of steel grids and eccentricity of the external load were examined. Also, a detailed characterization of the constituent materials…
Lessons Learned on the Tensile and Bond Behavior of Fabric Reinforced Cementitious Matrix (FRCM) Composites
2020
Fabric Reinforced Cementitious Matrix (FRCM) composites represent an effective, compatible and cost-efficient solution for strengthening and retrofitting existing structures. A strong research effort was done to investigate the tensile and bond properties of these materials, as well as the overall behaviour of strengthened members. A Round Robin Test was organized by Rilem TC 250-CSM on 28 FRCM composites comprising basalt, carbon, glass, PBO, aramid and steel textiles, embedded in either cement, lime or geopolymer mortars, to collect an experimental dataset and define test protocols. This paper collects the outcomes of this study to highlight fundamental properties of FRCM and to investiga…
Thermal and infrared spectroscopic characterization of historical mortars
1998
Abstract The characterization of historical mortars was performed by thermal analysis (TG-DTG), simultaneous infrared spectroscopy (TG-FTIR) and inductively coupled plasma atomic emission spectrometry (ICP-AES). The samples were taken from St. John Church (Tartu, Estonia), built in the 13th–14th centuries. The analyses are important for the restoration of the church. In reality, mortar is a very difficult system, the lime is accompanied with different hydraulic components. TG-DTG analysis and FTIR methods can be used to identify various components of mortar and to observe the reactions associated with the controlled heating at 25–900°C in dynamic air and nitrogen atmosphere. The elemental c…
Effects of natural fibres reinforcement in lime plasters (kenaf and sisal vs. Polypropylene)
2014
Nowadays the tendency to realize environment-friendly products is becoming more widespread to ensure sustainable and smart development. The synthetic fibres, frequently used, are harmful to the environment because they are non-degradable and non-renewable. Their use has resulted in an increase of oil consumption. Therefore, the possibility of replacing them with natural fibres becomes increasingly concrete confirmed by the researches and investigations carried out. In this work three lime based plasters were prepared and analysed to evaluate the influence on their performance of different fibres used as reinforcement. In particular each plaster was realised by adding to the mortar the same …
Salt extraction from lime-based mortars: An experimental study using different poultice formulations
2020
Abstract The extractive capability of soluble salts in poultices treatments currently used in mortar conservation (ArbocelTM plus sepiolite; ArbocelTM, sepiolite and sand; Westox-Cocoon®) were tested to evaluate their efficiency and compatibility with specific mortar substrate. The pore size distribution of the experimental mortar substrate and of the blank dried poultices were preliminarily accomplished by mercury intrusion porosimetry (MIP). Desalination tests were carried out on specifically-formulated mortars after capillary absorption of Na2SO4 0.3 M solution. The efficiency of salt extraction was measured by means of electrical conductivity meter and ion chromatography. Among the test…
Effect of corner over-reinforcing strips on the compressive behaviour of TRM confined masonry columns
2020
Several recent works studied the efficiency of inorganic matrix composites, namely Textile Reinforced Mortar (TRM) or Fabric Reinforced Cementitious Matrix, for enhancing the strength and shortening capacity of masonry columns subjected to axial load. Literature studies were addressed to study the great number of variables involved in the problem, such as the nature and the grade of mortar, the strength of the fabric, the number of reinforcing layers, the type, the arrangement and the strength of the masonry, and helped to draw the first technical guidelines for practitioners and designers. All the experimental works highlighted that the actual performance of TRM confinement in masonry memb…
Experimental Investigation on the Compressive Behaviour of Clay Brick Masonry Columns Confined by BFRP or Steel Wires
2016
This paper presents the results of an experimental research aiming to investigate on the compressive behavior of full size clay brick masonry columns reinforced with Basalt Fiber Reinforced Cementitious Matrix (BFRCM) or with steel wires collaring. Uniaxial compressive tests were performed on eight retrofitted columns and four control specimens. Two masonry strength were considered by varying the mortar grade. Results are presented and discussed in terms of axial stress-strain relationships, failure modes and crack patterns of the specimens tested up to failure. For the limit of investigated variables, comparisons with unreinforced specimens show the ability of these alternative techniques …
Debonding Phenomena in CFRP Strengthened Calcarenite Masonry Walls and Vaults
2009
In this paper the results of an experimental investigation on full-scale reinforced masonry elements like vaults and walls are presented. The masonry type is constituted by calcarenite ashlars and bed joint mortar and the reinforcement is constituted by Carbon Fibre Reinforced Polymer (CFRP) strips. Preliminary experimental results obtained in a previous research by the authors on the local behaviour at the interface CFRP-calcarenite are summarized. Tests with controlled displacement are carried out on out-of-plane loaded walls and cylindrical vaults loaded at a quarter of the span. Results of tests carried out before and after the application of the reinforcement made it possible to evalu…
Polysaccharide remains in Maya mural paintings: is it an evidence of the use of plant gums as binding medium of pigments and additive in the mortar?
2020
A number of monosaccharides characteristic of plant gums were found in paint layers and preparation layers of samples of Maya mural paintings of 10 archaeological sites located in Campeche and Yucatan regions. This finding opens the question about the deliberate use of these organic polymers as additives for improving workability and mechanical properties in the preparation layer mortar and conferring cohesion to the pigments in the paint layer. The study performed by GC-MS has confirmed the presence, in significant amounts, of a series of monosaccharides, being glucose and mannose between the most abundantly found. Nevertheless, the low amount present in most of the samples hindered the qu…