Search results for "nanoparticle"

Ce:YAG nanoparticles embedded in a PMMA matrix: preparation and characterization

2010

A Ce:YAG-poly(methyl methacrylate) composite was prepared using in situ polymerization by embedding the Ce:YAG nanopowder in a blend of methyl methacrylate (MMA) and 2-methacrylic acid (MAA) monomers and activating the photopolymerization using a radical initiator. The obtained nanocomposite was yellow and transparent. Its characterization was performed using transmission electron microscopy, small angle X-ray scattering, (13)C cross-polarization magic-angle spinning nuclear magnetic resonance, and photoluminescence spectroscopy. Results showed that Ce:YAG nanoparticles are well dispersed in the polymeric matrix whose structure is organized in a lamellar shape. The luminescence properties o…

Particle surface engineering effect on the mechanical, optical and photoluminescent properties of ZnO/vinyl-ester resin nanocomposites

2007

Zinc oxide (ZnO) nanoparticles functionalized with a bi-functional coupling agent methacryloxypropyl-trimethoxysilane (MPS) were used to fabricate a vinyl-ester resin polymeric nanocomposite, which shows an improved interfacial interaction between the particle and matrix. As a result, in comparison to the unmodified particle-filled nanocomposites, the functionalized particle-filled composites possessed higher resistance to thermal degradation, and demonstrated improved UV shielding and enhanced photoluminescent properties. The more uniform particle dispersion, passivation of the particle surface with MPS and increased oxygen vacancies were justified to contribute to the increased thermal st…

2017

For the last decades, nanocomposites materials have been widely studied in the scientific literature as they provide substantial properties enhancements, even at low nanoparticles content. Their performance depends on a number of parameters but the nanoparticles dispersion and distribution state remains the key challenge in order to obtain the full nanocomposites’ potential in terms of, e.g., flame retardance, mechanical, barrier and thermal properties, etc., that would allow extending their use in the industry. While the amount of existing research and indeed review papers regarding the formulation of nanocomposites is already significant, after listing the most common applications, this r…

One-pot synthesis of PbS NP/sulfur-oleylamine copolymer nanocomposites via the copolymerization of elemental sulfur with oleylamine

2014

A novel synthetic and processing strategy for converting elemental sulfur into polymeric and nanocomposite materials is reported. We describe a facile one-pot reaction using elemental sulfur and oleylamine as comonomers to prepare high sulfur content copolymers and lead sulfide nanoparticle (PbS NP) nanocomposites. This process enables the preparation of solution processable copolymers and nanocomposites, where the loading and dispersion of PbS NP inclusions could be precisely controlled. We demonstrate the dual roles of oleylamine with sulfur for both the copolymerization of sulfur copolymers as well as the in situ synthesis of PbS NPs in a one-pot fashion.

Starch Based Biodegradable Nanocomposites: Structure and Properties

2009

Plasticized starch (PS)/montmorillonite clay (MMT) nanocomposites were prepared by casting technique. Structural features, stress-strain characteristics and sorption properties were investigated. Upon introduction of rather small amounts of MMT, the PS parameters of the mechanical and barrier properties considerably improve. Tensile strength and elastic modulus of the materials examined decrease with increased moisture content, but the effect of reinforcement of PS with MMT nanoparticles remain intact.

The zero field self-organization of cobalt/surfactant nanocomposite thin films

2009

Cobalt nanostructures have been prepared by a chemical route based on the Co(II) reduction in the confined space of cobalt bis(2-ethylhexyl)sulfosuccinate (Co(DEHSS)(2)) reverse micelles dispersed in n-heptane. This procedure involves the rapid formation of surfactant softly coated Co nanostructures followed by a slow separation process of the magnetic-field responsive Co/surfactant nanocomposites from the liquid phase. The detailed structure of thin films of the Co/surfactant nanocomposites has been investigated by scanning force microscopy (SFM). The thin films were characterized by different anisotropic features. Micrometric long domains of self-aligned ellipsoidal NPs (tens of nanometer…

One‐Pot Synthesis of Superparamagnetic CoO‐MCM‐41 Nanocomposites with Uniform and Highly Dispersed Magnetic Nanoclusters

2004

Superparamagnetic CoO-MCM-41 mesoporous nanocomposites, with variable cobalt amounts, in the form of well-dispersed CoO-like clusters, were prepared in a large compositional range by a one-step reproducible procedure employing co-hydrolysis and co-condensation of the inorganic precursors in a water/triethanolamine medium. (© Wiley-VCH Verlag GmbH & Co. KGaA, 69451 Weinheim, Germany, 2004)

Mild Homogeneous Synthesis of Gold Nanoparticles through the Epoxide Route: Kinetics, Mechanisms, and Related One‐Pot Composites

2019

A new one-pot homogeneous methodology at room temperature to obtain Au nanoparticles (AuNP) on the basis of the epoxide route is presented. The proposed method takes advantage of the homogenous generation of OH- moieties driven by epoxide ring-opening, mediated by chloride nucleophilic attack. Once reached alkaline conditions, the reducing medium allows the quantitative formation of AuNP under well-defined kinetic control. A stabilizing agent, such as polyvinylpyrrolidone (PVP) or cetyltrimethylammonium chloride (CTAC), is required to maintain the AuNP stable. Meanwhile their presence dramatically affects the reduction kinetics and pathway, as demonstrated by the evolution of the UV/Vis spe…

Shape-dependency activity of nanostructured CeO2 in the total oxidation of polycyclic aromatic hydrocarbons

2013

11 figures, 2 tables.-- © 2012. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/

Ultraplāni anodēta alumīnija oksīda pārklājumi un to pielietojumi

2014

1 ANOTĀCIJA Ultraplāni anodēta alumīnija oksīda pārklājumi un to pielietojumi. Raimonds Popļausks, zinātniskais vadītājs Dr. ķīm. Donāts Erts. Promocijas darbs veltīts aktuālām problēmām par ultraplāna anodētā alumīnija oksīda pārklājumu iegūšanu uz dažādām virsmām un to pielietojumiem. Darbā izstrādātas metodikas atkārtojamu liela laukuma (virs 1 cm2) ultraplānu anodētā alumīnija oksīda masku ar variējamiem poru diametriem, starpporu attālumiem un biezumiem iegūšanai un pārnešanai uz dažādām virsmām, kā arī nanodaļiņu masīvu sensoru pielietojumiem iegūšanu caur šīm maskām. Izstrādāta metode ultraplānu anodētā alumīnija oksīda masku iegūšanai lai iegūtu nanodaļiņu masīvus ar diametru zem 20…