Search results for "nd:yag"
showing 10 items of 32 documents
Determination of an empirical law of aluminium and magnesium alloys absorption coefficient during Nd :YAG laser interaction
2007
International audience; Welding laser modelling requires knowledge about relative changes of many thermo-physical parameters involved in the interaction. The absorptivity of the material is one of the most important. In this study, experimental measurements of absorptivity with an integrating sphere on two alloys (aluminium and magnesium) were made. These results were compared with an analytical calculation that takes into account the trapping of the beam by multiple reflections inside the keyhole. Based on a statistical method, an empirical law is proposed connecting absorptivity with the peak power of the laser and the duration of interaction. During the interaction, two distinct phenomen…
The application of the random balance method in laser machining of metals
2008
International audience; Features peculiar to laser technology offer some advantages over more traditional processes, but, like all processes, it has its limitations. This article studies the limitations of laser machining of metals, and quantifies, through an experimental design method, the influence of operating parameters on productivity and on the quality of the machined surface. Three study materials were used: an aluminium alloy, stainless steel and a titanium alloy. An initial reading of the results indicates that productivity depends mainly on the frequency of the laser pulse and that the aluminium alloy behaves differently from the other two. The quality of the machined surface, jud…
A histological evaluation of the surgical margins from human oral fibrous-epithelial lesions excised with CO2 laser, Diode laser, Er:YAG laser, Nd:YA…
2018
Background We aim to evaluate the presence of histological artefacts in the surgical margins of human oral fibro-epithelial hyperplasias excised with lasers of different wavelengths, and also electrosurgical scalpel and cold scalpel. Moreover, we aim to determine if some of these instruments could impair the normal histological diagnosis of these lesions. Material and Methods We included 130 consecutive surgical samples of 80 females and 50 males (mean age of 53.82±16.55) with a histological diagnosis of an oral benign fibrous-epithelial hyperplasias. The samples were categorized into 6 groups according to the type of instrument used: CO2 laser group, diode laser group, Er:YAG laser group, …
Endovenous treatment of the great saphenous vein using a 1,320 nm Nd:YAG laser causes fewer side effects than using a 940 nm diode laser.
2005
Limited data are available about treatment-related side effects with respect to laser wavelength in endovenous laser treatment (ELT) of the great saphenous vein (GSV).To compare the results and side effects of a 940 nm diode and a 1,320 nm neodymium:yttium-aluminum-garnet (Nd:YAG) laser.Three patient cohorts (A, B, and C) received ELT of the GSV using a 940 nm diode laser at 15 W (group A) or 30 W (group B) or using a 1,320 nm laser at 8 W (group C). In all cases, energy was administered continuously with constant pullback of the laser fiber under perivenous tumescent local anesthesia.The GSVs of group A (n = 113), group B (n = 136), and group C (n = 33) received ELT. An average linear endo…
Study of surface layers and ejected powder formed by oxidation of titanium substrates with a pulsed Nd:YAG laser beam.
2009
Laser treatment of a titanium surface at certain conditions initiates the formation of titanium oxide layers as well as micro (nano) scale powder ejected from the surface of the substrate. The resultant morphology of the surface as well as the size and the structure of the particles are all strongly dependent on the treatment parameters (laser fluence, pulse frequency, overlap parameter, etc.). In this study, titanium substrates were treated with an industrial pulsed Nd:YAG laser in air, with varying parameters. Surface layers and ejected materials were compared using scanning and transmission electron microscopy, X-ray diffraction and Raman spectroscopy. The rutile phase of TiO(2) dominate…
Coprecipitation synthesis of Nd:YAG nanopowders II: the effect of Nd dopant addition the on Luminescence Properties
2009
Abstract Nanopowders of Yttrium Aluminium Garnet (Y3Al5O12, YAG) doped with neodymium (Nd:YAG, 0.2–24.0 at.%) were prepared using the co-precipitation method followed by an annealing treatment up to 950 °C. For a concentration of neodymium lower than 3.2 at.% the materials were found constituted by the garnet phase according to X-ray diffraction investigations. However, at higher neodymium loading the hexagonal and monoclinic forms of yttrium aluminium oxides were found together with the garnet phase. For Nd quantity lower than 0.8% the luminescence emission spectra appear to be nearly the same, indicating that in the examined range of composition the immediate surrounding of the emitting N…
Nd:YAG laser induced E′ centers probed by in situ absorption measurements
2005
We investigated various types of commercial silica irradiated with a pulsed Nd:YAG laser radiation (4.66 eV), with exposure time ranging up to 10000 s. Transient E' centers were probed in situ by measuring the amplitude of the optical absorption band at 5.8 eV (due to E' centers) both during and after irradiation. The laser-induced absorption is observed only in natural samples, whereas the synthetic materials exhibit high toughness to radiation effect. The reported results evidence that the kinetics of E' centers is influenced by their reaction with diffusing molecular hydrogen H2 made available by dimerization of radiolytic H0.
Dissimilar joining of copper to stainless steel and TA6V to stainless steel by high power beams : understanding and modeling of physicochemical pheno…
2010
The present study is dedicated to the comprehension of the mechanism of materials mixing during dissimilar welding by high power beam sources. We have been interested in joining of two couples of metallic materials which present different metallurgical problems: •copper- stainless steel (miscibility gap, important difference in physical properties);•TA6V- stainless steel (oxidation on air, formation of intermetallic phases which made the joint brittle).For the first couple of materials, continuous laser Nd:YAG welding and electron beam welding have been applied. The experimental study of morphology evolution, composition, microstructure and mechanical properties has allowed establishing the…
Gas protection optimization during Nd:YAG laser welding
2004
International audience; Many laser processes, such as welding or surface treatments are associated with an undesired phenomenon, which is oxidation. The solution commonly employed to solve this problem approaches the shielding gas and/or the shielding gas device. What we propose in this paper is a methodology with the goal to optimize the protection gas device design as well as the gas flow in the case of laser welding and surface treatments. The pressure created by the gas flow on the sample surface is recorded and analysed together with the operating parameters influence in order to reach the objectives. The nozzle system designed and presented below assures the protection against materia…
Surface modifications induced by nanosecond pulsed Nd:YAG laser irradiation of metallic substrates
2006
International audience; Substrate surface preparation is a key step in coating deposition process. In recent years, pulsed laser cleaning has emerged as a possible technique to challenge the traditional preparation methods (based on degreasing and eventually grit-blasting). The laser operated at short-pulse mode offers high cleaning efficiency and therefore has been largely used. In a specific process named PROTAL®, a nanosecond pulsed laser is introduced to prepare the surface simultaneously to thermal spraying, with the purpose of eliminating the contaminants and generating favorite surface conditions for coating deposition. This study aims at clarifying some fundamental aspects of nanose…