Search results for "nuclear chemistry"
showing 10 items of 1124 documents
Use of metallurgical dust for removal chromium ions from aqueous solutions
2018
The aim of the study was to determine the potential for the application of dust from steel plant as an effective sorbent for removing Cr(III) and Cr(VI) in the form of simple and complex ions – Acid Blue 193 dye from aqueous solutions. Three isotherms models were used to interpret the experimental results namely: Langmuir, Freundlich, and Dubinin–Radushkevich. Estimated equations parameters allowed to determine the binding mechanism. Based on laboratory studies it was found that the dust was characterized by high sorption capacities for Cr ions and dye from the aqueous solution. The sorption capacity of the dust for Cr(III) and Cr(VI) ions depended on the degree of oxidation, pH of solution…
Green approach to corrosion inhibition of stainless steel in phosphoric acid of Artemesia herba albamedium using plant extract
2019
Essential oil from aerial parts of Artemisia herba-alba from Morocco was hydrodistilled and its chemical composition oil was investigated by capillary GC and GC/MS. The major components were 1,8-cineole (35.6%) and camphor (24.1%). Artemisia herba-alba essential oil AHAO was tested as corrosion inhibitor of stainless steel (SS) in 1M H3PO4 using potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy measurements (EIS) and scanning electronically microscopy (SEM) studies. The results obtained showed that the essential oil of Artemisia reduces the corrosion rate. Tafel polarization method indicates that the plant extract behaves as a mixed type inhibitor. The inhibition…
The Synthesis, Characterization and Sintering of Nickel and Cobalt Ferrite Nanopowders
2012
The NiFe2O4 and CoFe2O4 ferrites were synthesized by two methods – chemical sol-gel self-combustion method and the high frequency plasma chemical synthesis and magnetic properties, crystallite size, specific surface area of synthesized products are characterized. Nanopowders synthesized in the high frequency plasma are with specific surface area in the range of (28 – 30) m2/g (the average particle size (38 – 40) nm, crystallite size ~40 nm). The ferrite nanopowders obtained by sol-gel self-combustion method have the specific surface area of (37 – 43) m2/g (average particle size (26 – 31) nm, crystallite size (10 – 20) nm). All synthesized nanopowders were sintered via pressure-less sinterin…
Magnolol and Honokiol: Two Natural Compounds with Similar Chemical Structure but Different Physicochemical and Stability Properties
2021
Magnolia spp. extracts are known for their use in traditional Korean, Chinese, and Japanese medicine in the treatment of gastrointestinal disorders, anxiety, and allergies. Among their main components with pharmacological activity, the most relevant are magnolol and honokiol, which also show antitumoral activity. The objectives of this work were to study some physicochemical properties of both substances and their stability under different conditions of temperature, pH, and oxidation. Additionally, liposomes of honokiol (the least stable compound) were formulated and characterized. Both compounds showed pH-dependent solubility, with different solubility–pH profiles. Magnolol showed a lower …
Immobilized Pd on magnetic nanoparticles bearing proline as a highly efficient and retrievable Suzuki–Miyaura catalyst in aqueous media
2015
A magnetically retrievable nanocatalyst was evaluated for amicrowave assisted Suzuki–Miyaura reaction in aqueous media.Excellent yields and conversions were obtained with low Pd loadings(down to 0.01 mol% Pd). It was stable up to 6 months in waterunder aerobic conditions and efficiency remained unaltered evenafter 7 repeated cycles. Refereed/Peer-reviewed
Simultaneous production of furfural and levulinic acid from pine sawdust via acid-catalysed mechanical depolymerization and microwave irradiation
2019
Abstract In this work pine sawdust was converted into levulinic acid (LA) and furfural. Sawdust was first pre-treated with sulfuric acid-catalysed mechanical depolymerization. The conversion reactions were then performed with microwave heating at 180 °C. To enhance the furfural yield and the efficient separation of furfural and LA, a biphasic water-toluene reaction system was used. The effect of an additional catalyst, AlCl3, on the yield of LA and furfural was also studied. According to the results the pre-treatment method enhanced the yields of LA. In addition, due to the microwave heating the reaction times were short. Additional AlCl3 catalyst enhanced the LA yield, however excellent fu…
Determination of platinum and iridium in reforming catalysts by second derivative and absorptiometric spectrophotometry
1991
Investigations on the spectrophotometric determination of platinum as a complex formed by tin(II)chloride in hydrochloric acid are reported. The determination of platinum was found to be interfered with by iridium, because it also forms a complex with tin(II) chloride. The features of the derivative absorption spectrophotometry for the quantitative determination of platinum and iridium was also studied. The analytical application of the method for the determination of platinum and iridium in catalysts was investigated.
Some observations on the spectrophotometric determination of nitrite using ergonovine-p-dimethylaminobenzaldehyde
1991
Abstract The system ergonovine maleate-p-diethylaminobenzaldehyde in sulfuric acid media is applied to the kinetic-spectrophotometric determination of nitrite ions with competitive precision. The reaction rate is strongly enhanced by the presence of nitrite or ferric ions, being the nitrite in the “promoting” role of the reaction. Linear calibration plots are obtained for nitrite concentration ranges 0.3–2.4 ppm or 0.66–6 ppb. The influence of foreign compounds is also established.
Effects of ultrasonically activated irrigants with or without surfactant on smear layer removal after post space preparation
2012
The aim of this study was to compare the effects of different NaOCl and EDTA formulations with/without ultrasonic use on smear layer removal and root canal surface characteristics after post space preparation. Study design: After post space preparations, forty-six teeth were subjected to different post space irrigation regimes; G1, 17% EDTA; G2, 17% EDTA+Ultrasonic activation; G3, EDTA-T; G4, EDTA-T+Ultrasonic activation; G5, NaOCl; G6, NaOCl+Ultrasonic activation. Specimens were examined under scanning electron microscope and scored for debris and smear layer removal and dentinal tubule opening and statistically analyzed with Kruskal Wallis and Dunn's test. Significance value was set at p<…
In vitro evaluation of the biocompatibility of contaminated implant surfaces treated with an Er : YAG laser and an air powder system
2004
Abstract: Titanium platelets with a sand-blasted and acid-etched surface were coated with bovine serum albumin and incubated with a suspension of Porphyromonas gingivalis (ATCC 33277). Four groups with a total of 48 specimens were formed. Laser irradiation of the specimens (n=12) was performed on a computer-controlled XY translation stage at pulse energy 60 mJ and frequency 10 pps. Twelve specimens were treated with an air powder system. After the respective treatment, human gingival fibroblasts were incubated on the specimens. The proliferation rate was determined by means of fluorescence activity of a redox indicator (Alamar Blue® Assay) which is reduced by metabolic activity related to c…