Search results for "nuclear chemistry"

showing 10 items of 1124 documents

Synthesis and characterization of ferrocene-based Schiff base and ferrocenecarboxaldehyde oxime and their adsorptive removal of methyl blue from aque…

2018

Abstract The ferrocene-based Schiff base 3 was synthetized by reaction of ferrocenecarboxaldehyde 1 with 4-aminoantipyrine 2. However, the reaction of 1 with hydroxylamine affords ferrocenecarboxaldehyde oxime 4. Compounds 3 and 4 were fully characterized by IR, 1H, 13C and DEPT-135 NMR spectroscopy, elemental analyses and also by single crystal X-ray diffraction. Compounds 3 and 4 were used to remove anionic methyl blue dye from wastewater. The results established that both compounds have high adsorption capacity towards methyl blue. Langmuir adsorption capacity of compound 4 (464 mmol/g) is much higher than that of compound 3 (193 mmol/g) at 25 °C. The kinetics data was fitted well pseudo…

methyl blue dyeLangmuirMethyl blue02 engineering and technology010402 general chemistry01 natural sciencesBiochemistryInorganic Chemistrychemistry.chemical_compoundAdsorptionHydroxylamineMaterials ChemistryPhysical and Theoretical Chemistryferrocenecarboxaldehyde oximeta116single crystal X-ray diffractionAqueous solutionSchiff baseOrganic Chemistry021001 nanoscience & nanotechnologyOximeferrocene-based Schiff base0104 chemical sciencesFerrocenechemistryadsorption0210 nano-technologyNuclear chemistryJournal of Organometallic Chemistry
researchProduct

Luminescence properties of neodymium-doped yttrium aluminium garnet obtained by the co-precipitation method combined with the mechanical process

2005

Nanopowders of yttrium aluminium garnet Y3Al5O12 (YAG) doped with neodymium ions were obtained by the co-precipitation method from the reaction of aluminium and yttrium nitrate and neodymium oxide with ammonia. After washing and drying the hydroxide precursors were calcined at 500, 700, 800 and 900 °C for 1 hour and at 1000 °C for 3 hours. This product was treated by ball milling in a zirconia vial for 0.5, 1.5 and 10 h in order to achieve smaller nanoparticles. The structure, microstructure, morphology and optical properties were investigated by means of diffractometric, microscopic and spectroscopic techniques. The course of the amorphous-to-crystalline transformation was complete after c…

nanoparticles; coprecipitation; ball millingMaterials scienceMetallurgychemistry.chemical_elementcoprecipitationYttriumCondensed Matter PhysicsMicrostructureNeodymiumAtomic and Molecular Physics and Opticschemistry.chemical_compoundchemistryAluminiumYttrium aluminium garnetGeneral Materials ScienceCubic zirconiananoparticlesball millingLuminescenceBall millNuclear chemistry
researchProduct

N,N-Dicyclohexylnitramine

2016

Molecules of the title compound, C12H22N2O2, are composed of an nitramine group substituted by two cyclohexane rings. The cyclohexane rings have chair conformations, with the exocyclic C—N bonds in axial orientations. In the crystal, C—H...O hydrogen bonds connect the molecules intoC(6) [-101] zigzag chains.

nitraminescrystal structureHydrogen bondChemistryStereochemistryGeneral MedicineCrystal structure010402 general chemistry010403 inorganic & nuclear chemistry01 natural sciences0104 chemical sciencesCrystalCrystallographyZigzagGroup (periodic table)hydrogen bondslcsh:QD901-999lcsh:CrystallographyIUCrData
researchProduct

4-Fluoro-N-methyl-N-nitroaniline

2016

Molecules of the title compound, C7H7FN2O2, are composed of a nitramine group which is twisted with the respect to the aromatic ring, with an N—N—C—C torsion angle of −117.38 (12)°. In the molecule, the N—N bond length [1.3510 (15) Å] indicates some double-bond character, while the angle between the aromatic ring and the nitramine group rules out further delocalization in the molecule. In the crystal, C—H...F hydrogen bonds connect the molecules intoC11(6) chains along theaaxis. C—H...O hydrogen bonds form, which featureR22(12) loops and further connect these chains.

nitraminescrystal structureinter­molecular bondsHydrogen bondStereochemistryintermolecular bondsGeneral MedicineCrystal structureDihedral angle010402 general chemistry010403 inorganic & nuclear chemistryRing (chemistry)01 natural sciences0104 chemical sciencesBond lengthchemistry.chemical_compoundCrystallographyDelocalized electronAnilinechemistrylcsh:QD901-999Nitrolcsh:CrystallographyIUCrData / International Union of Crystallography
researchProduct

New Evidence of the Enhanced Elimination of a Persistent Drug Used as a Lipid Absorption Inhibitor by Advanced Oxidation with UV-A and Nanosized Cata…

2019

This work demonstrates new evidence of the efficient destruction and mineralization of an emergent organic pollutant using UV-A and titanium nanosized catalysts. The target compound considered in this work is the primary metabolite of a lipid regulator drug, clofibrate, identified in many studies as refractory during conventional wastewater treatment. The photocatalytic performance study was carried out in batch mode at laboratory scale, in aqueous suspension. Kinetic data showed that titanium dioxide P25 Aeroxide® exhibits the highest photocatalytic efficiency compared to the other investigated catalysts. Pollutant degradation and mineralization efficiencies strongly increased when decreas…

pharmaceutic compoundschemistry.chemical_elementtitania catalysts02 engineering and technology010501 environmental scienceslcsh:Chemical technology01 natural sciencesCatalysisCatalysislcsh:Chemistrychemistry.chemical_compoundlcsh:TP1-1185mineralizationPhysical and Theoretical Chemistryemerging water pollutants0105 earth and related environmental sciencesdegradationPollutantQuenching (fluorescence)[SDE.IE]Environmental Sciences/Environmental Engineeringtoxicity[CHIM.CATA]Chemical Sciences/CatalysisMineralization (soil science)021001 nanoscience & nanotechnology6. Clean waterlcsh:QD1-999chemistry13. Climate actionkineticsTitanium dioxidePhotocatalysisDegradation (geology)[CHIM.OTHE]Chemical Sciences/Other0210 nano-technologyphotocatalysisNuclear chemistryTitaniumCatalysts
researchProduct

Heterogeneous photocatalytic degradation of pharmaceuticals in water by using polycrystalline TiO2 and a nanofiltration membrane reactor

2006

Abstract A study of the photodegradation of different pharmaceuticals [furosemide, ranitidine (hydrochloride), ofloxacine, phenazone, naproxen, carbamazepine and clofibric acid] in aqueous medium at various pHs by using a batch photoreactor and a photocatalytic membrane reactor working in recirculation regime was carried out. Polycrystalline TiO 2 was used as the photocatalyst, and different membranes (NTR 7410, PAN GKSS HV3/T, N 30 F, NF PES 10) were tested. A different adsorption of the substrates onto the catalyst surface was observed owing to the hydrophilic/hydrophobic character of the catalyst, depending on the pH. The photodegradation of the seven molecules in the batch reactor was s…

photocatalytic membraneMembrane reactorChemistryInorganic chemistryBatch reactorGeneral ChemistryCatalysisCatalysisMembraneAdsorptionPhotocatalysisMicrofiltrationNanofiltrationPhotocatalysisPhotodegradationNuclear chemistryCatalysis Today
researchProduct

Pro-Degradant Activity of Naturally Occurring Compounds on Polyethylene in Accelerate Weathering Conditions

2019

In this work, naturally occurring compounds, such as Vitamin E (VE) and Ferulic Acid (FA), at high concentrations, have been considered as pro-degradant agents for Low Density Polyethylene (PE). However, all obtained results using the naturally occurring molecules as pro-oxidant agents for PE have been compared with the results achieved using a classical pro-oxidant agent, such as calcium stearate (Ca stearate) and with neat PE. The preliminary characterization, through rheological, mechanical and thermal analysis, of the PE-based systems highlights that the used naturally occurring molecules are able to exert a slight plasticizing action on PE and subsequently the PE rigidity and crystalli…

polyethylene02 engineering and technology010402 general chemistryCalcium stearatelcsh:Technology01 natural sciencesArticlepro-oxidant activityFerulic acidchemistry.chemical_compoundCrystallinityStearateGeneral Materials Sciencelcsh:MicroscopyNaturally occurring compoundlcsh:QC120-168.85lcsh:QH201-278.5lcsh:TPolyethylene021001 nanoscience & nanotechnologyphoto-oxidation0104 chemical sciencesPolyolefinLow-density polyethylenechemistrylcsh:TA1-2040Degradation (geology)lcsh:Descriptive and experimental mechanicsnaturally occurring compoundslcsh:Electrical engineering. Electronics. Nuclear engineeringlcsh:Engineering (General). Civil engineering (General)0210 nano-technologylcsh:TK1-9971Nuclear chemistryMaterials
researchProduct

Preparation of tungstophosphoric acid/cerium-doped NH2-UiO-66 Z-scheme photocatalyst: a new candidate for green photo-oxidation of dibenzothiophene a…

2021

International audience; The goal of this study was to introduce an effective visible-light induced photocatalytic system with a good ability for photocatalytic oxidative desulfurization (PODS) and denitrogenation (PODN) using molecular oxygen (O2) as an oxidant. In this regard, tungestophosphoric acid (PW12) was supported onto cerium-doped NH2-UiO-66 (PW12/Ce-NUiO-66) and employed for the photo-oxidation of dibenzothiophene (DBT) and quinoline (Qu). Herein, using cerium (Ce) as a “mediator” facilitated the separation of charge carriers, while NH2-UiO-66 remarkably enhanced the surface area with plentiful adsorption sites and shifted the adsorption edge of PW12to the visible region. The sum …

pore volumeAdsorption edgesLight02 engineering and technology01 natural scienceschemistry.chemical_compound[SPI]Engineering Sciences [physics]quinolineVisible-light irradiationMaterials Chemistryoxidizing agentOxidative desulfurizationirradiationQuinolineCerium021001 nanoscience & nanotechnologyOxidantsFlue-gas desulfurizationCeriumDibenzothiophenePhotocatalysisCharge carrierCarrier mobility0210 nano-technologychemistry.chemical_element010402 general chemistryMaximum EfficiencyCatalysisArticleuraniumAdsorptionphosphotungstic acidpore size distributiondibenzothiophene derivativegreen chemistryphotooxidationDopingdesulfurizationGeneral Chemistrysurface areaPhotocatalytic systems0104 chemical sciencesVisible light inducedDibenzothiophenesTungstophosphoric acidMolecular oxygenPhotocatalytic activitychemistryadsorptiondesorptionoxygenphotocatalysisNuclear chemistrycatalyst
researchProduct

In Vitro Evaluation of Poly(lactide-co-glycolide) In Situ Forming Gels for Bedaquiline Fumarate Salt and Pharmacokinetics Following Subcutaneous Inje…

2021

This study evaluated in vitro and in vivo drug release of bedaquiline from in situ forming gels (ISGs) containing 200 mg eq./g bedaquiline fumarate salt prepared with four different grades of poly(d,l-lactide) (PDLLA) or poly(d,l-lactide-co-glycolide) (PLGA) with a lactide/glycolide ratio of 50/50 or 75/25 and acid (A) or ester (E) end-capping in N-methyl-2-pyrrolidone at a polymer/solvent ratio of 20/80% (w/w). Mean in vitro drug release in 0.05 M phosphate buffer pH 7.4 with 1% (w/v) sodium lauryl sulphate was 37.3, 47.1, 53.3, and 62.3% within 28 days for ISGs containing PLGA5050A, PDLLA, PLGA7525A, and PLGA7525E, respectively. The data suggested that drug release was primarily controlle…

porosityBedaquilinein vitro releasePharmaceutical SciencedissolutionPolyethylene glycolArticleDiffusionchemistry.chemical_compoundSubcutaneous injectionPharmacy and materia medicaPharmacokineticsIn vivoPharmacokineticsin situ forming gelsSolubilitybedaquilinesustained releaseinjectableLactidepolymer erosionPharmacology. TherapydiffusionIn vitro releasePolymer erosionRS1-441PLGAInjectablechemistryIn situ forming gelsBedaquilinePorositypharmacokineticsDissolutionNuclear chemistrySustained releasePharmaceutics
researchProduct

Complex technological and biological research of solutions for peritoneal dialysis

2018

Objective : The purpose of our work was to conduct technological, analytical, and biological investigations and stability studies of peritoneal dialysis (PD) solutions containing glucose and sodium lactate in single-chamber containers. Methods : Different formulations of PD solutions were prepared and sterilized at a temperature of 121 °C during 15 m. UV-spectrophotometric determination was performed using purified water as a blank. The spectra of the solutions were run in the range of 220 to 400 nm for the identification of an absorption maximum (λ max ) and measuring the absorbance at 228-230 nm and λ max before and after heat sterilization. λ max of the most PD solutions after sterilizat…

prodution5-hydroxymethylfurfuralNeutral red3kidneys cellsPotentiometric titrationSulforhodamine BPharmaceutical Sciencevero cellsSterilization (microbiology)Purified waterChlorideAbsorbancechemistry.chemical_compoundchemistryperitoneal dialysisBromidemedicine4-dideoxyglucoson-3-enPharmacology Toxicology and Pharmaceutics (miscellaneous)cell viabilityNuclear chemistrymedicine.drugInternational Journal of Applied Pharmaceutics
researchProduct