Search results for "nuclear energy"
showing 10 items of 614 documents
Growth mechanisms and related thermoelectric properties of innovative hybrid networks fabricated by direct deposition of Bi2Se3 and Sb2Te3 on multiwa…
2020
Abstract Flexible thermoelectric generators are an emerging trend in the field of waste heat conversion, as well as wearable and autonomous devices. However, the energy conversion efficiency of the state-of-the-art flexible thermoelectric devices is too low for their wide application and commercialization. In this work, n- and p-type multiwalled carbon nanotube (MWCNT)-thermoelectric material hybrid networks that may become a promising building block for the fabrication of flexible thermoelectric devices are presented. The hybrid networks were fabricated by direct deposition of thermoelectric material (Bi2Se3, Sb2Te3) on the MWCNT networks using physical vapor deposition technique. Growth m…
Investigation of hydrogen and deuterium impact on the release of tritium from two-phase lithium ceramics under reactor irradiation
2022
In the development of fusion energy, an important task is the study and improvement of tritium production technologies. In this case, one of the most promising materials for tritium generation is lithium ceramics. Considering the importance of the task, numerous studies are aimed at solving the problem of determining the parameters and mechanisms of tritium release in lithium-containing materials. This paper presents the results of a study of tritium release processes from two-phase lithium ceramics of Li$_{4}$SiO$_{4}$/Li$_{2}$TiO$_{3}$ during reactor irradiation when hydrogen and deuterium are injected into the chamber with irradiated samples. The mechanisms regularities of the tritium yi…
WCLL breeding blanket design and integration for DEMO 2015: status and perspectives
2017
Abstract Water-cooled lithium-lead breeding blanket is considered a candidate option for European DEMO nuclear fusion reactor. ENEA and the linked third parties have proposed and are developing a multi-module blanket segment concept based on DEMO 2015 specifications. The layout of the module is based on horizontal (i.e. radial-toroidal) water-cooling tubes in the breeding zone, and on lithium lead flowing in radial-poloidal direction. This design choice is driven by the rationale to have a modular design, where a basic geometry is repeated along the poloidal direction. The modules are connected with a back supporting structure, designed to withstand thermal and mechanical loads due to norma…
A neutron point kinetic model for fusion relevant calculations
2012
Abstract In the framework of research activities on fusion reactors a great effort is dedicated by the scientific community to the development of tritium breeding blankets. One of the main goals is to assess the neutronic behaviour of such devices to analyse their tritium breeding performance and to evaluate the required data for their thermal–mechanic and thermal–hydraulic design. Many papers have been published on this topic considering some stationary condition to calculate such important quantities as heating power, gas production and dpa rates, tritium breeding ratio, etc., but not much attention has been focussed to neutronic transport analyses in transient conditions. The present pap…
Automated parametric neutronics analysis of the Helium Cooled Pebble Bed breeder blanket with Be 12 Ti
2017
The Helium Cooled Pebble Bed (HCPB) breeder blanket is being developed as part of the European Fusion Programme. Part of the programme is to investigate blanket designs relevant for future demonstration fusion power plants. This paper presents neutronics analyses of the HCPB with an alternative neutron multiplier, Be12Ti which is incorporated into the design, replacing the current Be multiplier. A parameter study was performed for a range of geometries to identify the optimal heights of the lithium ceramic and neutron multiplier pebble beds. Automated creation of CAD models followed by conversion to constructive solid geometry (CSG) and unstructured mesh (UM) geometry allows the models to b…
Investigation of the DEMO WCLL Breeding Blanket Cooling Water Activation
2020
Abstract Within the framework of the activities foreseen by the EUROfusion action on the cooling water activation assessment for a DEMO reactor equipped with a Water Cooled Lithium Lead Breeding Blanket (WCLL BB), the University of Palermo is involved in the assessment of dose rates induced by the decay of nitrogen radioisotopes produced by water activation, nearby the main components (e.g. isolation valves) of both First Wall (FW) and Breeder Zone (BZ) cooling circuits. In particular, the aim of this work is to evaluate the spatial distribution of nitrogen isotopes (16N and 17N) in the WCLL BB cooling circuits. To this purpose, a coupled neutronic/fluid-dynamic problem is solved following …
Computational thermofluid-dynamic analysis of DEMO divertor cassette body cooling circuit
2018
Abstract Within the framework of the Work Package Divertor, Subproject: Cassette Design and Integration (WPDIV-Cassette) of the EUROfusion action, a research campaign has been jointly carried out by ENEA and University of Palermo to investigate the thermal-hydraulic performances of the DEMO divertor cassette cooling system. The research activity has been carried out following a theoretical-computational approach based on the finite volume method and adopting a qualified Computational Fluid-Dynamic (CFD) code. Fully-coupled fluid-structure CFD analyses have been carried out for the recently-revised cassette body cooling circuit under nominal steady state conditions, imposing a non-uniform sp…
Nuclear performances of the water-cooled lithium lead DEMO reactor: Neutronic analysis on a fully heterogeneous model
2021
Abstract The development of a conceptual design for the Demonstration Fusion Power Reactor (DEMO) is a key issue within the EUROfusion roadmap. The DEMO reactor is designed to produce a fusion power of about 2 GW and generate a substantial amount of electricity, relying on a closed tritium fuel cycle: it implies that the breeding blanket (BB) shall guarantee a suitable tritium production to enable a continuous operation without any external supply. The Water-Cooled Lithium Lead (WCLL) concept is a candidate for the DEMO BB: it uses liquid Lithium Lead as breeder and neutron multiplier and water in PWR condition as coolant. The neutronics analyses carried out in the past have been performed …
Stochastic response of linear and non-linear systems to α-stable Lévy white noises
2005
Abstract The stochastic response of linear and non-linear systems to external α -stable Levy white noises is investigated. In the literature, a differential equation in the characteristic function (CF) of the response has been recently derived for scalar systems only, within the theory of the so-called fractional Einstein–Smoluchowsky equations (FESEs). Herein, it is shown that the same equation may be built by rules of stochastic differential calculus, previously applied by one of the authors to systems driven by arbitrary delta-correlated processes. In this context, a straightforward formulation for multi-degree-of-freedom (MDOF) systems is also developed. Approximate CF solutions to the …
Were the chaotic ELMs in TCV the result of an ARMA process?
2004
The results of a previous paper claiming the demonstration that edge localized mode (ELM) dynamics on TCV are chaotic in a number of cases has recently been called into question, because the statistical test employed was found to also identify linear auto regressive—moving average (ARMA) models as chaotic. The TCV ELM data has therefore been re-examined with an improved method that is able to make this distinction, and the ARMA model is found to be an inappropriate description of the dynamics on TCV. The hypothesis that ELM dynamics are chaotic on TCV in a number of cases is therefore still favoured.