Search results for "olefin"
showing 10 items of 147 documents
Structure and thermal properties of a chitosan coated polyethylene bilayer film
2012
The thermal and the structural properties of chitosan coated polyethylene (PE) films were studied. The coating process did not significantly influence the thermal stability and the PE surface structure and/or composition of the polyolefin. Dehydration temperature of chitosan films reflected the strength of water/acetic acid/chitosan chains interactions. Glycerol, used as a plasticizer, formed new hydrophilic centres in the film matrix. Moreover it was better integrated in the CSEGLY than in CSAGLY network. Besides, the addition of a plasticizer in the chitosan films decreased the film degradation temperature. There were two main steps for the PE chitosan coated films degradation. The first …
Effect of different matrices and nanofillers on the rheological behavior of polymer-clay nanocomposites
2009
In this work, a comprehensive study of the rheological behavior under shear and isothermal and nonisothermal elongational flow of low density polyethylene (LDPE) and ethylene-vinyl acetate copolymer (EVA) based nanocomposites was reported to evaluate their "filmability", that is, the ability of these material to be processed for film forming applications. The influence of two different kinds of organoclay - namely Cloisite 15A and Cloisite 30B - and their concentration was evaluated. The presence of filler clearly affects the rheological behavior in oscillatory state of polyolefin-based nanocomposites but the increase of complex viscosity and the shear thinning are not dramatic. A larger st…
Protection of high-density polyethylene-silicon composites from ultraviolet-visible photodegradation
2017
[EN] The extent of the ultraviolet¿visible (UV¿vis) photoirradiation effect on high-density polyethylene (HDPE) and HDPE¿sili-con (Si) composites is reported in terms of the addition of Si microparticles at contents of 0.1, 1, and 5 wt %. A standard acceleratedUV-vis exposure was applied over 2750 h, corresponding to 22 months in Florida. Thermogravimetry, differential scanning calorimetry,and Fourier transform infrared spectroscopy were used as reliable techniques for monitoring the quality of the HDPE-Si composites. Theincreasing addition of Si microparticles delayed the photodegradation of the HDPE¿Si composites. Because of their strong light-scattering effects, Si microparticles blocked…
Effect of adding wood flour to the physical properties of a biodegradable polymer
2008
Wood flour/polymer composites (WPC) gained a significant interest during the last decades, due to several advantages related to the use of a natural-organic filler rather than an inorganic-mineral one. However, most of the studies have been performed on composites based on polyolefin matrices. A further step is the use of biodegradable polymers instead of traditional ones. In this work, wood flour (WF), under the form of short fibers, with two different sizes (coarse and fine) was added to a corn starch based biodegradable polymer of the Mater-Bi family. The effect of WF size, WF content, thermal treatment on the mechanical properties was investigated. The tensile mechanical tests showed an…
Compatibilization of Polypropylene/Polyamide 6 Blend Fibers Using Photo-Oxidized Polypropylene.
2018
The use of polyamide/polyolefin blends has gained importance and concern for years, but they also show some issues to be adequately addressed, such as the incompatibility between the two components. This is usually overcome by using suitable compatibilizers, typically based on functionalized polyolefins. However, there is only little information about the use of a degraded polyolefins to induce compatibilization. This is even truer, as far as polyamide 6/polypropylene (PA6/PP) blends are concerned. In this work, compatibilization of PA6/PP blends by using small amounts of photo-oxidized PP was investigated
Synthesis of 1-Palmitoyl-2-((E)-9- and (E)-10-nitrooleoyl)-sn-glycero-3-phosphatidylcholines
2019
Extensive investigation of nitrated phospholipids in connection with various biologically important processes requires reliable access to suitable material. A selective chemical synthesis introducing a defined nitrofatty acid at the sn-2 position of a 2-lyso sn-glycero-3-phosphatidylcholine was developed. Given that the nitroalkene moiety of both reactant nitrofatty acid derivative and the product esters is characterised by particular sensitivity to nucleophile addition and, depending on the intermediate, subsequent olefin isomerisation and retro-Henry-type reaction, a reliable two-step ester formation was introduced. The activation of the nitrofatty acid succeeded after reaction with trich…
Synthesis of Enantiopure ω-(4-Fluorophenyl)-6,11-Methylene Lipoxin B4 Methyl Ester
2021
AbstractThe synthesis of Lipoxin B4 analogues (LXB4) to gain access to stabilized inflammation-resolving compounds is an active field of research. Focusing on variation and stabilization of the conjugated E,Z,E,E C6–C13 tetraene moiety of natural LXB4, a methylene bridge introduced between C6 and C11 suppresses any Z/E isomerization of the C8–C9 olefin. Furthermore, rapid ω-oxidation (C20) should be avoided by replacing the C18–C20 segment by an aromatic moiety. Optically active C1–C12 building blocks were accessed from methyl cycloheptatriene-1-carboxylate (C6–C11, C21) and glutaryl chloride (C1–C5) as described earlier. The ω-segment was generated via a five-step sequence starting from 4-…
Tandem cross enyne metathesis (CEYM)–intramolecular Diels–Alder reaction (IMDAR). An easy entry to linear bicyclic scaffolds
2015
A new tandem cross enyne metathesis (CEYM)–intramolecular Diels–Alder reaction (IMDAR) has been carried out. It involves conjugated ketones, esters or amides bearing a remote olefin and aromatic alkynes as the starting materials. The overall process enables the preparation of a small family of linear bicyclic scaffolds in a very simple manner with moderate to good levels of diastereoselectivity. This methodology constitutes one of the few examples that employ olefins differently than ethylene in tandem CEYM–IMDAR protocols.
Improving epoxide production using Ti-UVM-7 porous nanosized catalysts
2002
Nanosized Ti-UVM-7 materials with a hierarchical system of pores at two different length scales have been prepared through a one-pot procedure by using a simple template agent; the catalytic activity and selectivity of the resulting materials in bulky olefin epoxidation by organic peroxides are the highest reported to date.
Photocyclization of a bichromophoric phenol/olefi system substituted at the methylene spacer - Zwitterions versus H-bridged intermediates in the exci…
2002
Photolysis of (E)- and (Z)-2-(1-ethyl-3-phenylpropenyl)phenol (1 and 2) under a variety of conditions produces a mixture of dihydrobenzopyrans 3 and 4, dihydrobenzofuran 5, cyclopropanes 6 and 7, and rearranged olefin 8. Acidic treatment of 1 and 2 gives a mixture of the six-membered ring products 3 and 4. Remarkable differences, associated with the nature of the precursor and the reaction conditions, are observed in the regiochemistry of cyclization and in the stereochemistry of the dihydrobenzopyrans (3/4 ratio). This points in favour of an H-bridged intermediate, rather than a fully zwitterionic species, as the direct precursor of the photocyclized products.