Search results for "paper industry"
showing 10 items of 413 documents
Physical pre-treatment of plums (Prunus domestica). Part 1. Modelling the kinetics of drying
2002
An alternative physical method for enhancing the drying rate of plums is proposed. It consists of the superficial abrasion of the plums' peel using an inert abrasive material to remove the cuticular waxy layer, the limiting factor for moisture loss. The physical pre-treatment was compared with a chemical treatment in which the plums were dipped into a solution of ethyl oleate. The drying kinetics of the above samples, including the untreated one, were reconstructed by using a mathematical model. The drying process, carried out at 60 C to reduce the prunes' quality loss, showed the great capability of both pre-treatments to enhance water diffusivity in the plum peel with respect to the untre…
Chemical Correlations Between Industrial Curds and Final Cheeses. Can Cheesemakers Standardise Productions?
2016
The chemical composition of milks and curds influences the microbial ecology and chemical features of produced cheeses. This statement is quite obvious because ‘normal’ cheeses—products with a prevailing ingredient, milk—are obtained by means of the transformation of the main raw material and the addition of minor components. Because of the possible scarcity of readily available milk in many regions or economic areas, the industry of milk and dairy products, including cheeses, has improved the production of ready-to-use curds. These products, also named ‘industrial curds’, are produced exclusively for further cheesemaking processes. For this reason, ready-to-use curds are pre-packaged with …
Influence of photo-oxidation on the performance and soil degradation of oxo- and biodegradable polymer-based items for agricultural applications
2021
Abstract The examination of the aging behavior of polymers, blends, composites, items, etc. under different environmental conditions is a priority issue for assessing the possible applications and establishing the lifetime. In agriculture, plastic items (mulch films, irrigation tubes, etc.) are widely used and subjected to solar UV exposure that can induce photo-oxidation on macromolecular chains. Therefore, weathering under outdoor conditions and accelerated degradation tests are performed for simulating aging processes during the lifetime of materials and select appropriate stabilizers to be used. In the last decades, oxo- and biodegradable polymers have been investigated and used in agri…
Membrane Bioreactors for wastewater reuse: Respirometric assessment of biomass activity during a two year survey
2018
Abstract Stricter effluent limits, water shortage conditions, land availability requires today even more the needs of advanced wastewater treatments. Attractive solutions come from membrane bioreactors (MBR), Integrated Fixed Film Activated Sludge (IFAS) or combinations (i.e., IFAS-MBRs). One crucial aspect for the applicability of this overall new technology, compared to the conventional activated sludge systems, is the lack of knowledge for design and manage (e.g., kinetic constants, optimal operative conditions etc.). In view of the above frame, the aim of the present study was to assess the kinetic and stoichiometric parameters of bacterial species in MBRs by means of respirometric tech…
ChemInform Abstract: Chemometrics: An Important Tool for the Modern Chemist, an Example from Wood-Processing Chemistry.
2010
This study briefly outlines the idea of principal component analysis and cross-correlation calculations (applied chemometrics) and presents an illustrative example from wood-processing chemistry. The applicability of chemometric data analysis was demonstrated by investigating the various structural changes that take place in dissolved and degraded lignin ("kraft lignin") during laboratory-scale kraft pulping of Scots pine (Pinus sylvestris) and silver birch (Betula pendula). The structural data (31P NMR and size exclusion chromatographic data) on kraft lignin were further processed by chemometric multivariate techniques (PCA and 2DCC), confirming, for example, that the cleavage of beta-aryl…
High-Temperature Electrolysis of Kraft Lignin for Selective Vanillin Formation
2020
Lignin represents the largest renewable resource of aromatic moieties on earth and harbors a huge potential as a sustainable feedstock for the synthesis of biobased aromatic fine chemicals. Due to the complex, heterogeneous, and robust chemical structure of the biopolymer, the valorization is associated with significant challenges. Unfortunately, technical lignins, which are a large side stream of the pulp and paper industries, are mainly thermally exploited. In this study, technical Kraft lignin was selectively electrochemically depolymerized to the aroma chemical vanillin. Using electricity, toxic and/or expensive oxidizers could be replaced. The electrodegradation of Kraft lignin was per…
Chemometric investigation on structural changes in pine kraft lignin during pulping
2000
Abstract Various structural changes which take place in dissolved lignin during the laboratory-scale kraft pulping of Scots pine (Pinus sylvestris) were studied. Lignin samples were subjected to the alkaline cupric oxide oxidation and the analytical data further processed by various multivariate chemometric techniques (principal component analysis, PCA; principal component regression, PCR; and projection to latent structures, PLS). Several models applicable to the indirect measurement of common pine kraft pulp properties (i.e., total cooking yield, kappa number and ISO brightness) were produced.
Evaluation of Permeate Quality in Pilot Scale Membrane Distillation Systems
2019
In this work, the salinity of permeate obtained with membrane distillation (MD) in pilot scale systems was analyzed. Experiments were performed with three different spiral-wound commercial modules, one from Solar Spring with 10 m2 surface membrane area and two from Aquastill with 7.2 and 24 m2. Intermittent operation meant that high permeate conductivity was measured in the beginning of each experiment, which was gradually decreasing until reaching a constant value (3&ndash
Membrane bioreactors sludge: From production to disposal
2020
Abstract This chapter reviews the MBR activated sludge from production to disposal. Starting from sludge characterization, the chapter first presents the features of MBR sludge (morphology and EPS chemical composition), also in terms of differences with the activated sludge from conventional activated sludge plants. Sludge dewaterability is then discussed, focusing on the differences between aerobically and anaerobically digested sludge. An analysis of the costs related to MBR sludge treatment and disposal also is presented in order to provide a framework for a sustainable MBR sludge management.
Air gasification of wood chips, wood pellets and grass pellets in a bubbling fluidized bed reactor
2021
Abstract Gasification is an attractive method for biomass-to-energy conversion and fluidized bed design is one of the best options for large scale operation. A bubbling fluidized bed reactor was used to analyze the effects of biomass type, equivalence ratio (ER) and temperature for product gas compositions. Wood chips, wood pellets and grass pellets were gasified between 650 °C and 800 °C temperature. The ER was varied between 0.08 and 0.16. Gasification of grass pellets was difficult at 800 °C due to agglomeration and the gas composition was poor compared to wood. The reactor performances improved over the temperature and 650 °C was not sufficient to achieve a reasonable carbon conversion.…