Search results for "paper industry"

Removal of toxic pollutants from pulp mill effluents by electrocoagulation

2011

This study investigated the effect of electrocoagulation treatment on toxic pollutant removal from pulp mill effluents. Synthetic wastewaters containing wood rosin and copper or pure resin acids were used to investigate the removal of resin acids and copper by electrocoagulation. Removal of pollutants by electrocoagulation was also tested with real debarking effluent. In this study, statistical experimental design and partial least squares modeling were used to investigate the effect of initial pH, current (current density) and treatment time. Electrocoagulation and subsequent filtration removed resin acids and copper from the synthetic wastewaters with high efficiency. Toxicity to algae (P…

Removal of ethyl acetate, n-hexane and toluene from waste air in a membrane bioreactor under continuous and intermittent feeding conditions

2012

BACKGROUND: European Union environmental policy has focused on abatement of volatile organic compounds (VOCs) from industrial emissions, and new European VOC emission limits have been established. This study analyzes the performance of a composite membrane bioreactor treating air stream contaminated with ethyl acetate, n-hexane and toluene under continuous and intermittent feeding conditions. RESULTS: The system was operated under continuous feeding conditions: removal efficiencies (REs) higher than 99% were obtained for inlet loads up to 200 g m−3 h−1 and empty bed residence times (EBRTs) as short as 15 s for ethyl acetate. A maximum elimination capacity of 75 g m−3 h−1 (RE ∼66%) at an EBR…

On the Reduction of Power Consumption in Vortexing Unbaffled Bioslurry Reactors

2020

Bioremediation of polluted soils via bioslurry reactors is an interesting option among those available nowadays, especially when recalcitrant pollutants are present. Vortexing unbaffled stirred tanks may be a valuable choice to this purpose as they were recently found to be more efficient than baffled vessels for solid suspension processes where mixing time is not a controlling factor. When operated at sufficiently high agitation speeds, the central vortex bottom reaches the impeller and air bubbles start to be distributed throughout the system, thus avoiding any sparger and related clogging issues. In the present work, a vortexing unbaffled stirred tank with solid loadings ranging from 2.5…

Hydrogen Dark Fermentation for Degradation of Solid andLiquid Food Waste

2021

The constant increase in the amount of food waste accumulating in landfills and discharged into the water reservoirs causes environment pollution and threatens human health. Solid and liquid food wastes include fruit, vegetable, and meat residues, alcohol bard, and sewage from various food enterprises. These products contain high concentrations of biodegradable organic compounds and represent an inexpensive and renewable substrate for the hydrogen fermentation. The goal of the work was to study the efficiency of hydrogen obtaining and decomposition of solid and liquid food waste via fermentation by granular microbial preparation (GMP). The application of GMP improved the efficiency of the d…

Chlorocymenes, cymenenes and other chlorohydrocarbons in pulp mill effluents, sludges and exposed biota

1992

Abstract Polychlorinated cymenes (PCYMS) and cymenenes (PCYMD) were analyzed by GC/LRMS/SIM in effluents and sludges of three different pulp mills and in fish and mussels exposed to pulp mill effluents. The levels of PCYMS+PCYMD were 0.3–4.8 μg/l in total effluents,

Olive oil mill toward industry 4.0

2021

In recent years many studies have been conducted on olive oil mill and processes for improving extra virgin olive oil (EVOO) quality. The malaxer is the most studied machine among all, it is responsible for malaxation, which represents a very important and critical step in the EVOO extraction process. The processing conditions allowing a selective control of the enzymes represent a crucial point of the oil mechanical extraction process, strictly related to the sensory and healthy quality of EVOO. The authors designed a malaxer prototype provided with a supervisor control acquisition data (SCADA) system for the smart management of the malaxation process to obtain high quality EVOO. The syste…

2021

The abundance of microplastics (MPs) in the atmosphere, on land, and especially in water bodies is well acknowledged. In this study, we establish an optical method based on three different techniques, namely, specular reflection to probe the medium, transmission spectroscopy measurements for the detection and identification, and a speckle pattern for monitoring the sedimentation of MPs filtrated from wastewater sludge and suspended in ethanol. We used first Raman measurements to estimate the presence and types of different MPs in wastewater sludge samples. We also used microscopy to identify the shapes of the main MPs. This allowed us to create a teaching set of samples to be characterized …

Air purification from a mixture VOCs in the pilot-scale trickle-bed bioreactor (TBB)

2017

The efficiency of the air bio-purification from the mixture of two volatile organic compounds (styrene and p-xylene) was studied. The process was carried out in a pilot-scale trickle-bed bioreactor installation designed to purify ∼200 m 3 h -1 of the polluted air. The bioreactor operated at concurrent flow of gas and liquid (mineral salt solution) through packing (polypropylene Ralu rings) covered with a thin layer of microorganisms (bacterial consortium of Pseudomonas sp. E-022150 and Pseudomonas putida mt-2). The experiments, carried out for various values of a reactor load with pollutant, confirmed the great efficiency of the investigated process. At the tested bed load with pollution (i…

Management of tannery wastewaters: treatment of spent chrome tanning bath and vegetable tanning effluents

2013

Abstract In this work, a chain of treatment processes was proposed and described in order to reach better management of mineral and vegetable tannery wastewaters. First, chromium was precipitated from the spent chrome tanning bath by sodium hydroxide (NaOH) and then reformulated to form a complex of basic chromium sulfate which was tested successfully in mineral tanning process. On the other hand, the supernatant recovered after precipitation of chromium with NaOH was used to dilute vegetable tanning wastewaters characterized by a high concentration of polyphenols (about 2,574 mg/L). Diluted effluent was then treated by liming and tangential microfiltration using a ceramic membrane based on…

Fate of aerobic granular sludge in the long-term: The role of EPSs on the clogging of granular sludge porosity

2016

This work aims to investigate the stability of aerobic granular sludge in the long term, focusing on the clogging of the granular sludge porosity exerted by the extracellular polymeric substances (EPSs). The effects of different cycle lengths (short and long-term cycle) on the granular sludge stability were investigated. Results obtained outlined that during the short duration cycle, the formation and breakage of the aerobic granules were continuously observed. During this period, the excess of EPS production contributed to the clogging of the granules porosity, causing their breakage in the long run. During the long-duration cycle, the extended famine period entailed a greater EPSs consump…