Search results for "paper industry"
showing 10 items of 413 documents
Fermentation in fish and by-products processing: an overview of current research and future prospects
2020
Fish industry has been growing continuously over the last decades and generates huge amounts of by-products. These by-products come from fish head, skin, bones, thorns, and viscera. Part of them are processed for feed, collagen and oil production, and to a lesser extent to produce biofuels and fertilizers, but many other high-value bioactive compounds can be recovered. Fish fermentation, which is traditionally used to increase fish shelf-life, results into the formation of bacteria metabolites of interest. Applied to by-products, fermentation increases the quality of protein hydrolysates, oil and produces antioxidant compounds. This technology, which is safe, environmental-friendly and poor…
Control of VOCs from printing press air emissions by anaerobic bioscrubber: Performance and microbial community of an on-site pilot unit
2017
Abstract A novel process consisted of an anaerobic bioscrubber was studied at the field scale for the removal of volatile organic compounds (VOCs) emitted from a printing press facility. The pilot unit worked under high fluctuating waste gas emissions containing ethanol, ethyl acetate, and 1-ethoxy-2-propanol as main pollutants, with airflows ranging between 184 and 1253 m 3 h −1 and an average concentration of 1126 ± 470 mg-C Nm −3 . Three scrubber configurations (cross-flow and vertical-flow packings and spray tower) were tested, and cross-flow packing was found to be the best one. For this packing, daily average values of VOC removal efficiency ranged between 83% and 93% for liquid to a…
Anaerobic degradation of glycol ether-ethanol mixtures using EGSB and hybrid reactors: Performance comparison and ether cleavage pathway.
2017
Abstract The anaerobic biodegradation of ethanol-glycol ether mixtures as 1-ethoxy-2-propanol (E2P) and 1-methoxy-2-propanol (M2P), widely used in printing facilities, was investigated by means of two laboratory-scale anaerobic bioreactors at 25oC: an expanded granular sludge bed (EGSB) reactor and an anaerobic hybrid reactor (AHR), which incorporated a packed bed to improve biomass retention. Despite AHR showed almost half of solid leakages compared to EGSB, both reactors obtained practically the same performance for the operating conditions studied with global removal efficiencies (REs) higher than 92% for organic loading rates (OLRs) as high as 54 kg of chemical oxygen demand (COD) m−3 d…
Effect of long residence time and high temperature over anaerobic biodegradation of Scenedesmus microalgae grown in wastewater
2018
[EN] Anaerobic digestion of indigenous Scenedesmus spp. microalgae was studied in continuous lab-scale anaerobic reactors at different temperatures (35 degrees C and 55 degrees C), and sludge retention time - SRT (50 and 70 days). Mesophilic digestion was performed in a continuous stirred-tank reactor (CSTR) and in an anaerobic membrane bioreactor (AnMBR). Mesophilic CSTR operated at 50 days SRT only achieved 11.9% of anaerobic biodegradability whereas in the AnMBR at 70 days SRT and 50 days HRT reached 39.5%, which is even higher than the biodegradability achieved in the thermophilic CSTR at 50 days SRT (30.4%). Microbial analysis revealed a high abundance of cellulose-degraders in both re…
Bacterial community structure and removal performances in IFAS-MBRs: A pilot plant case study
2017
Abstract The paper reports the results of an experimental campaign carried out on a University of Cape Town (UCT) integrated fixed-film activated sludge (IFAS) membrane bioreactor (MBR) pilot plant. The pilot plant was analysed in terms of chemical oxygen demand (COD) and nutrients removal, kinetic/stoichiometric parameters, membrane fouling and sludge dewaterability. Moreover, the cultivable bacterial community structure was also analysed. The pilot plant showed excellent COD removal efficiency throughout experiments, with average value higher than 98%, despite the slight variations of the influent wastewater. The achieved nitrification efficiency was close to 98% for most of the experimen…
Understanding the performance of an AnMBR treating urban wastewater and food waste via model simulation and characterization of the microbial populat…
2018
[EN] An anaerobic membrane bioreactor (AnMBR) pilot plant treating kitchen food waste (FW) jointly with urban wastewater was run for 536 days. Different operational conditions were tested varying the sludge retention time (SRT), the hydraulic retention time (HRT) and the penetration factor (PF) of food waste disposers. COD removal efficiency exceeded 90% in all tested conditions. The joint treatment resulted in an almost 3-fold increase in methane production (at 70 days of SRT, 24 h HRT and 80% PF) in comparison with the treatment of urban wastewater only. Mathematical model simulations and Illumina technology were used to obtain in-depth information of this outstanding process performance.…
Insights into the biological process performance and microbial diversity during thermophilic microalgae co-digestion in an anaerobic membrane bioreac…
2020
Abstract Harvested microalgae Chlorella spp. and primary sludge were co-digested in a laboratory-scale anaerobic membrane bioreactor (AnMBR) under thermophilic conditions (55 °C). The system was run for 700 days divided into four experimental phases to determine the influence of the organic loading rate on the process performance and the microbial community. The rise in organic loading rate from 0.17 to 0.5 gCOD·L−1·d−1 led to a 35% improvement in methane production. The system reached 69% biodegradability working at 0.5 gCOD·L−1·d−1 and a high solids retention time (70 d), indicating the efficient conversion of biomass into biogas through the AnMBR configuration while avoiding possible inh…
Effect of a co-substrate supply in a MBR treating shipboard slop: Analysis of hydrocarbon removal, biomass activity and membrane fouling tendency
2018
The paper reports the main results of an experiment carried out on a membrane bioreactor (MBR) plant designed for the treatment of shipboard slops. With a view of a co-treatment process of the slop with other wastewaters, sodium acetate, as external co-substrate, was supplied (high dosage – Period 1, low dosage – Period 2) to evaluate its effects on hydrocarbons removal. The MBR pilot plant enabled approximately 99% of total petroleum hydrocarbon (TPH) removal during the entire experiment, confirming the robustness of the MBR technology for the treatment of slops. The chromatography/mass spectrometry analysis showed that the removal efficiency for each alkane was close to the value observed…
Effect of substrate composition on the stability and microbial community of an anaerobic expanded granular sludge bed reactor treating printing solve…
2019
Abstract The performance and microbial community analysis of an expanded granular sludge bed reactor (EGSB) treating wastewater polluted with mixtures of ethanol and glycol ethers –such as 1-ethoxy-2-propanol (E2P) and 1-methoxy-2-propanol (M2P)– were evaluated. The results showed good EGSB performance during start-up (100% of ethanol) in terms of global removal efficiency (RE > 95%). When glycol ethers were added, an initial adaptation period was observed of ~20 days. While the RE of M2P became complete, the RE of E2P reached only 65%. The proportion of glycol ethers was gradually increased and at the end of this study only a binary mixture of E2P and M2P was fed. In the last stage, the gl…
Varieties of State Aid and Technological Development: Government Support to the Pulp and Paper Industry, the 1970s to the 1990s
2018
Countries promote the development of pulp and paper industry through industrial, technology and innovation policy measures. Direct interventions and regional and environmental policies, together with more general governmental measures on trade negotiations, taxation, labour policies, and infrastructure development (e.g. roads, energy) have also had an impact on shaping the geographical location of and investments in the pulp and paper industry. This chapter presents an historical overview of government support on pulp and paper industry in the Organisation for Economic Co-operation and Development (OECD) countries from roughly the 1970s to the 1990s. As the earlier literature suggests, in c…