Search results for "parametri"
showing 10 items of 1144 documents
New customized elbow orthosis made by additive manufacturing
2019
Orthoses are additional devices that help people with disabilities. The focus of this work is the design and manufacture of a new customized elbow orthosis completely made by Additive Manufacturing (AM). One of the innovative characteristic of the device is the use of torsion springs that simulate the action of physiotherapists during exercises for patient rehabilitation. Parametric modeling approach based on generative algorithms was used to design the device. Finally, FEM analyses have been performed to validate the design.
Parametric Hull Design with Rational Bézier Curves and Estimation of Performances
2021
In this paper, a tool able to support the sailing yacht designer during the early stage of the design process has been developed. Cubic Rational Bézier curves have been selected to describe the main curves defining the hull of a sailing yacht. The adopted approach is based upon the definition of a set of parameters, say the length of waterline, the beam of the waterline, canoe body draft and some dimensionless coefficients according to the traditional way of the yacht designer. Some geometrical constraints imposed on the curves (e.g., continuity, endpoint angles, curvature) have been conceived aimed to avoid unreasonable shapes. These curves can be imported into any commercial Computer Aide…
Motion Control of Four-Wheel Independently Actuated Electric Ground Vehicles considering Tire Force Saturations
2013
A vehicle stability control approach for four-wheel independently actuated (FWIA) electric vehicles is presented. The proposed control method consists of a higher-level controller and a lower-level controller. An adaptive control-based higher-level controller is designed to yield the vehicle virtual control efforts to track the desired vehicle motions due to the possible modeling inaccuracies and parametric uncertainties. The lower-level controller considering tire force saturation is given to allocate the required control efforts to the four in-wheel motors for providing the desired tire forces. An analytic method is given to distribute the high-level control efforts, without using the num…
Parametric Modeling CAD-CAM of the Ankle and Pathological Related Situations
2014
It is primary object of the present study to create a 3D model of the human ankle and an axis system that will show the position the tibia and the foot on a healthy subject. Regarding this scope of the study, the first step in obtaining the 3D model of the bones is scanning. The graphic modeling software used is Catia V5 R20. It is another object of the present study to create an axis system that will be very easy to maneuver and on which we can show different pathological situations, not only on a healthy subject, creating their assembly reference systems considering the mechanical and anatomical axes existing and creating prerequisites for the study of different possible pathological situ…
A semi-empirical multipurpose steady-state model of a fuel cell for household appliances
2013
In this paper, a multipurpose model of a proton exchange membrane fuel cell for household appliances is proposed. According to a conventional mathematical approach, the proposed model is derived from the physical and electro-chemical equations that rule the fuel cell behaviour. Differently from existing models, a parametric analysis is carried out and a few tunable parameters are accurately selected and identified. Furthermore, this paper proposes an innovative technique of unique model architecture which enables the designer to solve by himself the trade-off between complexity and accuracy on the basis of the specific applications. Three different choices could be performed by the designer…
A parametric study of curved incrementally launched bridges
2013
Abstract The structural behaviour of incrementally launched bridges in the construction stages depends on different parameters involving deck, nose, supports and guide devices, because static schemes vary continuously with the advance of the deck above the piers. For this reason temporary stresses in the deck, during launching, are rather different from those occurring in service life. Horizontally curved launched bridges also present the effects of torsion induced by geometric curvature. A parametric study is presented in order to analyse the influence of design parameters on the construction of these bridges. Analyses were carried out by extending to curved beams a procedure based on the …
A practical approach for the strength evaluation of RC columns reinforced with RC jackets
2015
Abstract Reinforced concrete (RC) jacketing is nowadays one of the most common techniques adopted for seismic retrofitting of existing RC columns. It is used to increase load-carrying capacity and ductility of weak existing members by means of a simple and cheap method. The structural efficiency is related to two main effects: – the enlargement of the transverse cross section; – the confinement action provided by the external jacket to the inner core. Several theoretical and experimental studies were addressed in the past to investigate on how it is possible to calculate the strength enhancement due to these effects and to highlight the main key parameters influencing the structural behavio…
Slotted Blades Savonius Wind Turbine Analysis by CFD
2013
In this paper a new bucket configuration for a Savonius wind generator is proposed. Numerical analyses are performed to estimate the performances of the proposed configuration by means of the commercial code COMSOL Multiphysics® with respect to Savonius wind turbine with overlap only. Parametric analyses are performed, for a fixed overlap ratio, by varying the slot position; the results show that for slot positioned near the blade root, the Savonius rotor improves performances at low tip speed ratio, evidencing a better starting torque. This circumstance is confirmed by static analyses performed on the slotted blades in order to investigate the starting characteristic of the proposed Savoni…
PCM Thermal Energy Storage in Buildings: Experimental Study and Applications
2015
Abstract The study aims at analyzing the performance of Phase Change Materials (PCMs) in residential housing for different climates. This paper presents the results of an experiment performed in the Concordia University Solar Simulator and Environmental Chamber research facility (SSEC, Montreal, Canada). PCM boards were embedded on the back wall of a test hut placedin the climatic chamber. Several experiments were performed to explore the potential for verification of the proposed analysis and to produce enough data to perform model calibrations. Results show a strong increase in the apparent thermal inertia of the room allowing for a reduction in daily temperature fluctuations in the test …
Prediction of the additional shear action on frame members due to infills
2014
Infill masonry walls in framed structures make a significant contribution to the response under seismic actions. With special regard to reinforced concrete (RC) structures, it is known that internal forces modifications caused by the frame–infill interaction may be not supported by the surrounding frame because of the additional shear forces arising at the ends of beams and columns. Such additional forces may lead to the activation of brittle collapse mechanisms and hence their prediction is basic in capacity assessment, especially for structures that disregard the details for seismic zones. In this paper a parametric study is carried out addressed to the prediction of the shear forces ment…