Search results for "parametri"
showing 10 items of 1144 documents
Ground-Fault Current Transfer at the Transition Station of a Combined Overhead-Cable Line. A Parametric Analysis
2007
When a substation is fed by a combined overhead-cable transmission line, a significant part of the ground fault current flows through the grounded cable sheaths and discharges into the earth at the transition station, where cables are connected to the overhead line. If the transition station is a dead-end steel pole structure, the local ground electrode, small and of high resistance, could be inadequate to maintain the ground potential rise within safety limits in case of a fault to ground at the receiving end substation. Based on a circuit model approach, the paper presents a parametric analysis of the fault current distribution between the faulted substation and the transition station, ta…
Battery storage systems for peak load shaving applications: Part 2: Economic feasibility and sensitivity analysis
2016
This paper is the second of a two-part series, aiming to evaluate the economic feasibility of electrochemical storage systems in peak load shaving applications. The battery energy storage system (BESS) is considered to be added to a private facility, with the aim of reducing the customer electricity bill. The BESS is charged during the night, when the electricity prices are the lowest and discharged during the daily hours, when the prices are the highest, contemporary achieving a leveling of the daily usage pattern. The economical evaluations are carried out considering four different electrochemical technologies: lithium-ion (li-ion), advanced lead-acid, sodium-sulphur (NaS) and flow batte…
Mobility scenarios in the Valley of the Temples
2015
The valley of the Temples in Agrigento is one the most known wonders of the ancient Greek time to be still standing is South Italy. Chosen as an emblematic location in the center of the island, it is the exemplary site used to assess the potential for electric mobility in terms of energy and environmental benefits of electricity over standard fuels. Such an assessment is performed by means of a life-cycle approach, including the use of the Life Cycle Assessment methodology, the use of the standard ILCD-PEF indicators and the development of a parametric analysis investigating the impact of different electricity penetration levels in the local transports system. The results identify relevant …
Fuzzy Adaptive EKF Motion Control for Nonholonomic and Underactuated Cars with Parametric and non Parametric Uncertainties
2007
A new fuzzy adaptive motion control system including on-line extended Kalman''s filter (EKF) for wheeled underactuated cars with non-holonomic constraints on the motion is presented. The presence of parametric uncertainties in the kinematics and in the dynamics is treated using suitable differential adaptation laws. We merge adaptive control with fuzzy inference system. By using fuzzy system, the parameters of the kinematical controller are functions of the lateral, longitudinal and orientation errors of the motion. In this way we have a robust control system where the dynamics of the motion errors is with lower time response than the adaptive control without fuzzy. Also Lyapunov''s stabili…
Force Variations on Heave Compensating System for Ultra-Deepwater Drilling Risers
2010
This paper discusses modeling aspects related to dynamic analysis of deep water drilling risers. These risers must have a heave compensator that maintains a near constant tension in the riser independent on platform motions. Traditional riser analysis will apply constant top tension or a simple parametric model that may give approximate tension variation. The present paper describes an alternative analysis procedure that consists of the following step: • Global riser analysis including calculation of dynamic stroke of the heave compensator from platform motions and riser dynamics. A “pipe-in-pipe” approach is used to represent the hydraulic cylinders. • Calculation of dynamic tension variat…
A parametric study on unbalanced three phase islanded microgrids with inverter interfaced units
2013
In this paper, the solution of the power flow for unbalanced three phase microgrids systems is proposed. The study aims at the integration of inverter interfaced units using the control law used for primary voltage and frequency regulation, so as to take into account possible small variations of these parameters to account for sudden load changes. The proposed study deals with unbalanced systems which is the typical case of small distribution systems and shows how the power losses term varies as the regulators parameters vary as well, thus showing that these are sensitive parameters that could have an important role in optimal management of such systems.
Theoretical approaches for modelling buckling effects in rebars of RC members
2017
Buckling of longitudinal bars in reinforced concrete (RC) members is definitely a critical issue in framed structures subjected to seismic loads. Second order effects can affect the compressive stressâstrain law of steel bars, influencing ductility calculations of RC structures. Moreover, literature studies show that buckling can occur over a length wider than stirrupsâ pitch (global buckling mode), involving more stirrups and inducing large deflections in the bar. If the critical length is not carefully estimated, stirrupsâ failure can occur, causing also the sudden loss of confining effects in concrete. This paper presents the results of different approaches for calculating the crit…
A robust fault detection design for uncertain Takagi-Sugeno models with unknown inputs and time-varying delays
2013
Abstract This paper investigates the problem of robust fault detection system design for a class of uncertain Takagi–Sugeno (T–S) models. The system under consideration is subject to unknown input and time-varying delay. The fault detection system is designed such that the unknown input is thoroughly decoupled from residual signals generated by the fault detection system. Furthermore, the residual signals show the maximum possible sensitivity to the faults and the minimum possible sensitivity to the external disturbances. The model matching approach is utilized to tackle the effects of parametric uncertainties in the model of the system. The design procedure is presented in terms of Linear …
Improved Planning In-Service Inspections of Fatigued Aircraft Structures Under Parametric Uncertainty of Underlying Lifetime Models
2014
Certain fatigued structures must be inspected in order to detect fatigue damages that would otherwise not be apparent. A technique for obtaining optimal inspection strategies is proposed for situations where it is difficult to quantify the costs associated with inspections and undetected failure. For fatigued structures for which fatigue damages are only detected at the time of inspection, it is important to be able to determine the optimal times of inspection. Fewer inspections will lead to lower fatigue reliability of the structure upon demand, and frequent inspection will lead to higher cost. When there is a fatigue reliability requirement, the problem is usually to develop an inspection…
A comprehensive analysis of electric energy consumption of single point incremental forming processes
2014
Abstract Production processes, as used for discrete part manufacturing, are responsible for a substantial part of the environmental impact of products, but are still poorly documented in terms of environmental impact. The present paper proposes a comprehensive energetic analysis of Single Point Incremental Forming Processes (SPIF). The three most commonly used machine tool architectures able to perform SPIF operations have been taken into account: a CNC milling machine, a six-axes robot as well as the dedicated AMINO machine tool were analyzed from an electrical energy consumption point of view. For all the setups, a working cycle time study and power study were performed. Moreover the cont…