Search results for "penetration"
showing 10 items of 168 documents
Shear and flexural strength prediction of corroded R.C. beams
2017
Abstract The purpose of the work was the study of the structural safety of R.C. beams subjected to corrosion processes though the derivation of moment-curvature diagrams and moment-to-shear interaction diagrams. Normal-strength reinforced concrete beams with longitudinal bars in the presence of transverse stirrups and subjected to corrosion processed are considered. Experimental results available in the literature related to corrosion processes, for steel bars, crack openings and bond degradation due to rust formation are reviewed. Then analytical laws relating to crack opening, bond degradation with attack penetration depth, through a rearranged form of Faraday’s law, are presented. An ana…
Optical determination of the oxygen content of YBa2Cu3O6+x thin films by IR reflectance and transmittance measurements
2001
Abstract Recent studies of the optical properties of YBa2Cu3O6+x (YBCO) single crystals by several authors have shown that the optical conductivity in the infrared spectral region is a sensitive function of the oxygen content of the samples. Infrared spectroscopy thus offers a possibility for oxygen concentration analysis and is an alternative to other methods such as (i) the X-ray determination of the length of the c-axis and (ii) spectroscopic ellipsometry at an electronic transition band centered around 4.1 eV whose strength decreases with increasing oxygen content. We explore the applicability of the IR optical method for the case of YBCO thin films of about 300 nm thickness which are e…
Disorder-induced Raman scattering in rhenium trioxide (ReO3)
2007
Raman scattering in cubic metallic perovskite (ReO3) was studied at room temperature for well-crystallized monolith, polycrystalline powder and thin film samples. Defect-induced first-order Raman scattering was detected from the sub-surface region, given by the penetration depth of a 633 nm laser, and its origin was explained on the basis of a rigid-ion vibrational model for bulk ReO3. A quenching of the Raman intensity was observed in crystalline monolithic ReO3 upon increasing the temperature up to 250 °C and was related to crystal surface reconstruction/annealing.
Bond strength of a new Kevlar fiber-reinforced composite post with semi-interpenetrating polymer network (IPN) matrix
2019
Background This study aimed to evaluate the bond strength and the penetration depth of two adhesive systems to a new experimental semi-IPN fiber post versus a commercial post. Material and Methods Experimental Kevlar fiber (KF) and control everStick®POST (ES) posts (n=20/ group) with a diameter of 1.5 mm were used, 10 posts coated with StickResin (SR) and the other 10 posts coated with Scotch bond multipurpose (SBMP) adhesives. Composite resin buildup was performed over each post, using a cylindrical plastic mold (10 mm × 6 mm). Four discs of 2 mm thickness were prepared from each post/composite buildup and underwent pushout bond strength test at a crosshead speed of 0.5 mm/min accompanied …
Simulation of liquid penetration in paper
2006
Capillary penetration of a wetting liquid in a microtomographic image of paper board, whose linear dimension was close to the average length of wood fibers, was simulated by the lattice-Boltzmann method. In spite of the size of the system not being large with respect to the size of structural inhomogeneities in the sample, for unidirectional penetration the simulated behavior was described well by that of the Lucas-Washburn equation, while for radial penetration a radial capillary equation described the behavior. In both cases the average penetration depth of the liquid front as a function of time followed a power law over many orders of magnitude. Capillary penetration of small droplets of…
High-performance of PbO2 nanowire electrodes for lead-acid battery
2014
Abstract PbO2 nanowires were obtained by template electrodeposition in polycarbonate membranes and tested as positive electrode for lead-acid battery. Nanowires were grown on the same material acting as current collector that was electrodeposited too. The nanostructured electrodes were assembled in a zero-gap configuration using commercial negative plate and separator. Cell performance was tested by galvanostatic charge/discharge cycles in a 5 M H2SO4 aqueous electrolyte. PbO2 nanostructured electrodes were able to deliver at 1C rate an almost constant capacity of about 190 mAh g−1 (85% of active material utilization), close to the theoretical value (224 mAh g−1). The nanowire array provide…
Comparative evaluation of sealing ability, penetration and adaptation of a self etching pit and fissure sealant- stereomicroscopic and scanning elect…
2019
Background The efficacy of pit and fissure sealants in preventing occlusal caries is a well-established fact. Considering the difficulty in achieving strict isolation for a longer duration while treating the pediatric patients, a simplified procedure of sealant application is desirable. While, a self-etching sealant, Prevent Seal offers a quick procedure, the physical properties of this material haven’t been studied yet. Thus, this study was aimed to comparatively evaluate sealing ability, penetration and adaptation of a self-etching pit and fissure sealant and a conventional resin sealant. Material and Methods This was an in vitrointergroup comparative study, which consisted of 2 groups- G…
Generation and excitation of point defects in silica by synchrotron radiation above the absorption edge
2010
We report photoluminescence measurements carried out on amorphous SiO{sub 2} upon excitation by synchrotron light. Exposure of the as-grown material to above-edge light at low temperature induces the formation of nonbridging oxygen hole centers (NBOHC), localized in a thin layer below the surface limited by the penetration depth (tens of nm) of impinging light. After concluding the exposure to 11 eV light, stable defects are revealed by observing their characteristic 1.9 eV photoemission band excited at 4. 8eV. The local concentration of induced defects, supposedly formed by nonradiative decay of excitons, is very high (close to approx10{sup 21} cm{sup -3}) and independent of the previous h…
Particle Penetration into Polydisperse Polymer Brushes: A Theoretical Analysis
2017
Based on theoretical analysis, the effect of polydispersity on particle penetration into polydisperse polymer brushes is investigated. Three different polydispersities representing sharp, moderate, and extremely wide chain length distributions are chosen, since the corresponding explicit expressions of brush density at these polydispersities are available. To simplify the discussion, this study is restricted to spherical particles of small size which ensure that the particle insertion only causes local conformational perturbations. By analyzing the particle distribution, it is found that polydispersity always facilitates particle penetration. This prediction is confirmed by analyzing the su…
An experimental method for the investigation of rigid polyurethane foams in shear
2018
Widespread applications of rigid polyurethane and plastic foams lead to shear deformations. Therefore, methods for ensuring shear using experimental investigations are necessary, including the possibility of determining the shear modulus, strength and limit angle. Therefore, a device that allows investigating the shear properties of highly porous plastic foams was developed. The proposed device comprises a clip-on extensometer, commonly exploited in uni-axial compression/tension tests, for the determination of the shear displacement directly on the foams’ sample, on a measurement zone of certain dimensions and location. An innovative construction of the extensometer’s legs is elaborated, p…