Search results for "phosphine"
showing 10 items of 618 documents
Lanthanide complexation with CMPO and CMPO-calix[4]arenes in solution: spectrophotometric and electrospray mass spectrometric approaches.
2007
The binding of lanthanide(III) cations with organophosphorous ligands like CMPO and related calix[4]arene-based derivatives have been investigated using two experimental methods. The stability constants of the lanthanum, europium and ytterbium complexes were first determined in methanol by UV absorption spectrophotometry in the presence of nitrate or chloride anions. The results showed that the stoichiometry and the stability of the complexes formed depend on the position of the CMPO moieties either on the wide or the narrow rim of the calixarene scaffold, the nature of the medium, the conformational mobility of the ligands. Complexation of lanthanum was also followed by ESI-mass spectromet…
A Simple Phosphine–Diolefin‐Promoted Copper‐Catalysed N‐Arylation of Pyrazoles with (Hetero)aromatic Bromides: The Case of Chloroarenes Revisited
2012
A molecularly defined new phosphine–diolefin cubane copper pre-catalyst used at 1.25 mol % under mild conditions promotes the coupling of pyrazoles to functionalised aryl and heteroaryl bromides, which hold a variety of functional groups. This versatile phosphorus-based system was thus successfully used, under identical conditions, for the coupling of a large scope of heteroaromatics to selectively produce pyridinyl- and pyrimidinyl-pyrazoles, as well as several novel furyl-, thienyl- and thiazolyl-substituted pyrazoles. The careful investigation of coupling with the analogous aryl and heteroaryl chlorides clearly indicated that for specifically activated chloroarenes a direct nucleophilic …
Robust, Highly Luminescent Au13 Superatoms Protected by N-Heterocyclic Carbenes
2019
Gold superatom nanoclusters stabilized entirely by N-heterocyclic carbenes (NHCs) and halides are reported. The reduction of well-defined NHC–Au–Cl complexes produces clusters comprised of an icosahedral Au13 core surrounded by a symmetrical arrangement of nine NHCs and three chlorides. X-ray crystallography shows that the clusters are characterized by multiple CH−π and π–π interactions, which rigidify the ligand and likely contribute to the exceptionally high photoluminescent quantum yields observed, up to 16.0%, which is significantly greater than that of the most luminescent ligand-protected Au13 superatom cluster. Density functional theory analysis suggests that clusters are 8-electron …
Photo-assisted formation of a chelating diphos ligand from PPh3 and a cyclometallated [P(C6H4)(C6H5)2]− ligand. Crystal structure of Pd{η2-o-[P(C6H5)…
2000
Abstract The cyclometallated palladium compound, Pd[η2-(C6H4)P(C6H5)2]Br[P(C6H5)3] (1), in the solid state by action of light, evolves to give Pd{η2-o-[P(C6H5)2]2(C6H4)}Br2 (2). This compound contains the diphosphine, o-[P(C6H5)2]2(C6H4), as chelated ligand that is formed by a couple reaction of the metallated ligand η2-[(C6H4)P(C6H5)2]− and the coordinated arylphosphine. A study by NMR spectroscopy confirms that the o-phenylene bridge in the diphosphine ligand in 2 comes from the metallated phosphine ligand in 1.
Preparation and reactions of palladium(II) complexes with C2-bonded heteroaromatic ligands trans[PdCl(RN)(PPh3)2] (RN = 2-pyridyl, 2-pirazyl, 2-pyrim…
1986
Abstract The complexes trans -[PdCl(R N )(PPh 3 ) 2 ] (I) [R N = 2-pyridyl (2-Py), 2-pyrazyl (2-pyz), 2-pyrimidyl (2-pym) group] have been prepared in high yield by deprotonation with NEt 3 of the corresponding cationic compounds trans [PdCl(R N H) (PPh 3 ) 2 ] + (R N H = N -protonated C 2 -heteroaromatic ligand) in the presence of an excess of PPh 3 . In chlorinated solvents, complexes I undergo a slow reversible dimerization into the binuclear derivatives [PdCl(μ-R N )(PPh 3 )] 2 (II) (μ-R N = C 2 , N 1 -bridging ligand). From the 31 P NMR spectra in 1,2-dichloroethane the following dissociation constants were obtained: 1.9 mol 1 −1 (R N = 2-py), 5.1 × 10 −2 (2-pym), 6.6 × 10 −3 (2-pyz). …
Synthesis of new orthometallated iridium(III) compounds by chemical and electrochemical methods
1987
Abstract Replacement of one phosphine ligand in IrCl 3 (η 2 -PCBr)(η 1 -PCBr) ( 1 ) (PCBr = P( o -BrC 6 F 4 )Ph 2 ), by various P-donor ligands has given compounds of stoichiometry IrCl 3 (η 2 -PCBr)L ( 3 : L = PMePh 2 ; 4 : L = P( p -MeC 6 H 4 ) 3 ; 5 : L = P(OMe) 3 , 6 : L = P(OPh) 3 ). All of these show two irreversible reduction peaks in the range −1.1, −1.3 and ca. −2.0 V. The electrochemical reduction of compound 1 at −1.5 V (at 0°C) leads to a very reactive iridium(I) species, probably IrCl(PCBr) 2 , which undergoes intramolecular orthometallation at room temperature. Three compounds are obtained as the results of this chemical conversion: IrBr 2 (PC)(PCBr) ( 7 ), IrCl 2 (PC)(PCBr) (…
Reaction of Rh2(μ2-O2CCH3)3[μ2-(C6H4)PMePh](HO2CCH3)2 with triphenylphosphine: rearrangement of the metalated PMePh2 ligand and formation of a compou…
1995
The reaction of [Rh2(μ2-O2CCH3)3{μ2-(C6H4)PMePh}] (1) in CHCl3 with one mole of PPh3 gives the two phosphine monoadducts, which are in rapid equilibrium above −40 °C. After 6 h at room temperature this mixture gives [Rh2(μ2-O2CCH32{μ2-(C6H4)PMePh}{μ2-(C6H4)PPh2}](HO2CCH3)2 (3), a doubly metalated compound with a head-to-head configuration. 1 reacts with two moles of PPh3, forming the bis-adduct 1.P2, which at 10 °C gives a mixture 3, in the form of its phosphine adduct 3.P, and [Rh2(μ2-O2CCH3)2{μ2-(CH2)PPh2}{μ2- (C6H4) PPh2}(PPh3)] (2). It is confirmed that 3.P is not the kinetic product in the reaction from 1.P2 to 2. The structure of [Rh2(μ2-O2CCH3)2{μ2-(CH2)PPh2}{μ2-(CP6H4) PPh2} (PPh3)]…
Ceramide inhibits Kv currents and contributes to TP-receptor-induced vasoconstriction in rat and human pulmonary arteries
2011
et al.
Palladium nanoparticles–polypyrrole composite as an efficient catalyst for cyanation of aryl halides
2014
Abstract New palladium-polypyrrole (Pd/PPy) nanocomposites have been studied in cyanation of aryl halides with K 4 Fe(CN) 6 and showed high catalytic efficiency. Aryl iodides, bromides, and chlorides are active. The reaction can be performed both in organic solvents and in water; in the latter case, the catalyst was immobilized on graphite support. The cyanation of inactivated aryl chlorides is of special importance as only a few publications dealing with efficient cyanation of aryl chlorides are available, in which expensive and poisonous phosphine ligands and non-aqueous solvents are used. The influence of the morphology of the catalyst on its efficiency in cyanation was investigated, and…
Light-responsive hybrid material based on luminescent core-shell quantum dots and steroidal organogel
2016
We report the synthesis of a smart novel hybrid with reversible photoswitchable luminescence properties modulated by light. The combination of a low molecular weight organogelator (LMOG) and CdSe/ZnS core-shell semiconductor nanoparticles capped with trioctylphosphine oxide ligands produces a luminescent, stable and transparent material. Modulation of the luminescence properties was successfully achieved using a diarylethene photochromic compound, with good resistance to fatigue ca. 22 cycles. Interestingly, the morphology of the organogel fibers was preserved in the hybrid, while a partial luminescence quenching of the nanoparticle was observed. This material could have implication for on-…