Search results for "photocatalysi"
showing 10 items of 626 documents
A survey of photocatalytic materials for environmental remediation
2012
Abstract Heterogeneous photocatalysis is an advanced oxidation process which has been the subject of a huge amount of studies related to air cleaning and water purification. All these processes have been carried out mainly by using TiO 2 -based materials as the photocatalysts and ca. 75% of the articles published in the last 3 years is related to them. This review illustrates the efforts in the search of alternative photocatalysts that are not based on TiO 2 , with some exceptions concerning particularly innovative modifications as nanoassembled TiO 2 or TiO 2 composites with active carbon, graphite and fullerene. Papers reporting preparation, characterization and testing of binary, ternary…
The impact of TiO2 modifications on the effectiveness of photocatalytic processes [review]
2018
This paper outlines the recent studies on the application of photocatalysis using semiconductors, with modified titanium dioxide (TiO2) in the process of reducing chemical contamination of surface and ground waters. During the last forty years, an increasing interest in catalysts of this type is noticeable. Hence, a wide range of methods of TiO2 modifications have been proposed so far by using its various polymorphs, composites with metals and non-metals and polymer-coatings or impregnating it with dyes that effectively absorb sunlight.
Sequential biological and photocatalysis based treatments for shipboard slop purification: A pilot plant investigation
2019
This study investigated the treatment of a shipboard slop containing commercial gasoline in a pilot plant scale consisting of a membrane biological reactor (MBR) and photocatalytic reactor (PCR) acting in series. The MBR contributed for approximately 70% to the overall slop purification. More precisely, the biological process was able to remove approximately 40%, on average, of the organic pollution in the slop. Nevertheless, the membrane was capable to retain a large amount of organic molecules within the system, amounting for a further 30% of the influent total organic content removal. However, this affected the membrane fouling, thus resulting in the increase of the pore blocking mechani…
Azo-Dyes Photocatalytic Degradation in Aqueous Suspension of TiO2 Under Solar Irradiation
2002
Abstract The photodegradation of two common and very stable azo-dyes, i.e. methyl-orange (C14H14N3SO3Na) and orange II (C16H11N2SO4Na), is reported. The photocatalytic oxidation was carried out in aqueous suspensions of polycrystalline TiO2 irradiated by sunlight. Compound parabolic collectors, installed at the “Plataforma Solar de Almeria” (PSA, Spain) were used as the photoreactors and two identical reacting systems allowed to perform photoreactivity runs for the two dyes at the same time and under the same irradiation conditions. The disappearance of colour and substrates together with the abatement of total organic carbon content was monitored. The main sulfonate-containing intermediate…
Photocatalytic activity of TiO2/SiO2 systems
2009
Silica-supported TiO(2) powders were synthesized by a wet method under mild conditions. The aim of the work was the preparation of TiO(2)/SiO(2) additives for photocatalytic cements. Three types of commercial SiO(2) were used as supports: Cabot, Axim and Fly Ash. Cabot silica was ultra-pure whereas the other two silica contained different percentages of various oxides. The TiO(2)/SiO(2) samples, denoted TiO(2)/Cabot, TiO(2)/Axim and TiO(2)/Fly Ash, were prepared by boiling suspensions obtained by addition of silica to a solution of TiCl(4) in water (volume ratio 1:10). The photocatalytic activity was evaluated in a gas-solid system both in batch and in continuous reactors using 2-propanol a…
Continuous monitoring of photocatalytic treatment by flow injection. Degradation of dicamba in aqueous TiO2 dispersions
2001
The possible use of flow injection (FI) to monitor the photocatalytic mineralization of dicamba (3,6-dichloro-2-methoxybenzoic acid) present at the trace level in aqueous solutions containing TiO2 suspensions has been evaluated. Experiments were performed in a stirred photochemical reactor equipped with a simple FI manifold, integrating an online filtration unit able to perform the monitoring of the UV absorbance of the irradiated solution every 4 min. The light source used was a medium pressure mercury lamp (125 W). During the initial steps of the reaction the formation of UV absorbing intermediates, which completely disappear in less than 80 min, was evidenced. Additional HPLC, DOC and ch…
Optical properties and quantum yield determination in photocatalytic suspensions
2006
Knowledge of the optical properties of photocatalytic suspensions is vital for a correct comparison of their energetic efficiency. In this work, the determination of both absorption and scattering coefficients of aqueous suspensions of commercial TiO2 powders irradiated by monochromatic light was carried out by measuring only one quantity—the transmitted photon flow—as a function of the catalyst mass and by applying an asymptotic form of the Kubelka–Munk solution of the radiative transfer equation. Applying a nonlinear fitting procedure the evaluation of the actual values of absorption and scattering coefficients was carried out. The limit for optically thick media of the Kubelka–Munk equat…
Iron-based metal-organic framework: Synthesis, structure and current technologies for water reclamation with deep insight into framework integrity.
2021
Water is a supreme requirement for the existence of life, the contamination from the point and non-point sources are creating a great threat to the water ecosystem. Advance tools and techniques are required to restore the water quality and metal-organic framework (MOFs) with a tunable porous structure, striking physical and chemical properties are an excellent candidate for it. Fe-based MOFs, which developed rapidly in recent years, are foreseen as most promising to overcome the disadvantages of traditional water depolluting practices. Fe-MOFs with low toxicity and preferable stability possess excellent performance potential for almost all water remedying techniques in contrast to other MOF…
Role of Hydroxyl, Superoxide, and Nitrate Radicals on the Fate of Bromide Ions in Photocatalytic TiO2 Suspensions
2020
The influence of bromide ions on systems containing highly reactive radical species is of great interest for environmental remediation, atmospheric chemistry, and the synthesis of high-added-value ...
Photochemical and photocatalytic isomerization of trans -caffeic acid and cyclization of cis -caffeic acid to esculetin
2016
Abstract The photoisomerization of trans-caffeic acid to cis-caffeic acid has been studied in the presence of N2 in homogeneous aqueous solutions and in suspensions of various TiO2 catalysts. The results supported the hypothesis of an energy transfer process from TiO2 to the substrate due to the recombination of the photogenerated electron–hole pairs. The differences among the measured photostationary [cis]/[trans] ratios have been attributed to the different physico-chemical properties of the catalysts. In particular, the lowest ratio measured in the presence of Merck TiO2 was ascribed to the very low adsorption of trans-caffeic acid onto the surface of this sample. In the presence of O2 a…