Search results for "photocatalysi"
showing 10 items of 626 documents
Study of phase composition, photocatalytic activity, and photoluminescence of TiO2 with Eu additive produced by the extraction-pyrolytic method
2021
The Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART2. The work was also partially supported by the LZP grant 2020/2-0074. R. Burve has been supported by the project “Synthesis of nanostructured materials based on titanium dioxide and tin dioxide and investigation of their physicochemical properties” Nr. MP-2019/7, for strengthening scientific personnel capacity 2019/2020 at the Riga Technical University. Authors are grateful to Dr. K. Šmits for the microscopic measurements and SEM images.
Photocatalytic oxidation of gaseous toluene on anatase TiO2 catalyst: Mechanistic aspects and FT-IR investigation
1999
Abstract Photo-oxidation of toluene has been carried out in gas–solid regime by using polycrystalline anatase TiO2 as the catalyst. The reacting gaseous mixture was toluene, air and water in various molar ratios. A pyrex fixed-bed continuous photoreactor irradiated by a medium pressure Hg lamp was used for performing the photoreactivity experiments. The main oxidation product was benzaldehyde but benzene, benzyl alcohol and traces of benzoic acid, phenol and unidentified compounds were also detected. The molar conversion to benzaldehyde with respect to the initial amount of toluene was ca. 20% in the best experimental conditions. Benzene was produced only as a transient product during the f…
Photocatalytic activity of anatase-nickel ferrite heterostructures
2015
The simple co-precipitation route was used to couple commercial TiO2 anatase nanopowder with nickel ferrite (NiFe2O4). The morphology and the crystalline structure of composite nanoparticles were characterised by TEM, N2 adsorption-desorption, XRD and Rietveld refinement, XPS and XAS. The optical and magnetic properties were investigated. After co-precipitation NiFe2O4 nanoparticles, composed of spinel ferrite crystal phase, were formed on the surface of TiO2 anatase nanopowder. The TiO2/NiFe2O4 composite oxide demonstrated large specific surface area, high visible light absorption efficiency and efficient charge carrier separation, compared to pristine anatase TiO2 or pristine NiFe2O4, rep…
Physicochemical characterization of metal hexacyanometallate–TiO2composite materials
2015
The paper describes the synthesis and characterization of novel TiO2–metal hexacyanometallates (MHCMs) composite materials. The starting material, TiO2, was modified by addition of cobalt-hexacyanoferrate (CoHCF) or iron-hexacyanocobaltate (FeHCC) at various concentrations. The resulting composites were characterized as follows: cyclic voltammetry (CV) followed the formation of TiO2–MHCM clusters, TEM micrographs studied their morphology, XAS and XPS data indicated that MHCM bonds to TiO2 through the nitrogen atom of its –CN group and modifies the environment of Ti compared to that of pure anatase. As expected, and confirmed by UV-Vis and XP-valence band data, the electronic properties of T…
Surface properties of iron-titania photocatalysts employed for 4-nitrophenol photodegradation in aqueous TiO2 dispersion
1994
Iron(III) doped specimens (0.01–5% atomic Fe ∶ Ti) have been prepared by impregnating polycrystalline “home prepared” TiO2 (mainly anatase) and have been studied for photocatalytic degradation of 4-nitrophenol in aqueous dispersions. Some structural and surface properties have been studied by X-ray diffraction, specific surface area and porosity measurements and FTIR monitoring of pyridine, ammonia and methanoic acid adsorption for surface acidity and basicity. Their surface properties were compared with a corresponding series of photocatalysts prepared by a coprecipitation method. Adsorption of pyridine and ammonia indicates the presence of surface acid Lewis sites, a low concentration of …
Surface and Electronic Features of Fluorinated TiO 2 and Their Influence on the Photocatalytic Degradation of 1-Methylnaphthalene
2020
International audience; Surface fluorination improves the photocatalytic activity of TiO2, and the influences of various features of fluorinated TiO2 (TiO2–F) have often been discussed in the literature. The present paper addresses the changes induced by surface fluorination on the morphological, structural, surface, and electronic features of TiO2. In particular, X-ray diffraction, specific surface area analysis, and transmission and scanning electron microscopy give evidence that surface fluorination does not affect the structural properties and the morphology of TiO2 nanoparticles. In contrast, fluorination induces changes of surface and electronic properties. Chemical and thermogravimet…
High photodegradation and antibacterial activity of BN–Ag/TiO 2 composite nanofibers under visible light
2018
To develop material with good photocatalytic properties for organic compound degradation and bacterial removal, we produced Ag/TiO2 and BN–Ag/TiO2 composite nanofibers that included controlled amounts of boron nitride (BN) nanosheets and silver (Ag). After annealing at 500 °C under air, we used scanning electron microscopy, transmission electron microscopy, Brunauer–Emmet–Teller analysis, X-ray diffraction, energy-dispersive X-ray spectroscopy, Raman spectroscopy, UV-visible reflectance spectroscopy and room temperature photoluminescence to investigate the morphological, structural and optical properties of all samples. The photocatalytic tests using methylene blue under visible light, in r…
Dimensionless Analysis Of Slurry Photocatalytic Reactors Using Two-Flux And Six-Flux Radiation Absorption-Scattering Models
2007
Photocatalytic oxidation (PCO) over titanium dioxide (TiO2) is a "green" sustainable process for the treatment and purification of water and wastewater. However,the application of PCO for wastewater treatment on an industrial scale is currently hindered by a lack of simple mathematical models that can be readily applied to reactor design. Current models are either too simplistic or too rigorous to be useful in photocatalytic reactor design, scale-up, and optimization. In this paper a simple mathematical model is presented for slurry, annular, photocatalytic reactors that still retains the essential elements of a rigorous approach while providing simple solutions. The model extends the appli…
Photocatalytic ozonation for a sustainable aquaculture: A long-term test in a seawater aquarium
2019
Abstract A long-term test at a laboratory scale with a closed system (a coral reef aquarium) has been carried out to study the potentialities of photocatalytic ozonation and photocatalysis for the removal of noxious organic compounds in recirculating systems (aquaria and recirculating aquaculture systems) working with a minimum make up of new water. Attention has been focused not only on the depuration capabilities but also on possible negative phenomena, some of which could become apparent only at long times. After having tuned the system by setting appropriate operating conditions and procedures, positive results were obtained. In particular, it was observed that the alternation of photoc…
Concurrent removal of Cr(III), Cu(II), and Pb(II) ions from water by multifunctional TiO2/Alg/FeNPs beads
2019
Abstract The use of multifunctional materials for water remediation is a modern approach where adsorption phenomena and heterogeneous photocatalysis can be applied for the removal of pollutants. Since the ideal remediation system should be able to remove both organic and inorganic pollutants, a crucial aspect to consider is the knowledge of operational parameters affecting the removal process, especially when heavy metal ions are present in concoction as in real systems. Given the proven efficiency of multifunctional TiO2/Alg/FeNPs magnetic beads for the removal of model organic pollutants, this study investigated the possibility to exploit such system also for the removal of mixed heavy me…