Search results for "photovoltaic"
showing 10 items of 646 documents
Theoretical study on the influence of electric field direction on the photovoltaic performance of aryl amine organic dyes for dye-sensitized solar ce…
2019
It is very important to reveal the influence of different electric field directions on dye sensitizers. Thus, in this study, we investigated the electronic structures and optical properties of six designed aryl amine organic dye models under different electric fields using density functional theory (DFT) and time-dependent density functional theory (TD-DFT). Moreover, the electronic structures and optical properties of these studied dyes with different electric field in tetrahydrofuran (THF) were also calculated. The key parameters of the short-circuit current density (Jsc), including light harvesting efficiency (LHE) and intra-molecular charge transfer (ICT), are discussed in detail. With …
Anthracene-containing PPE-PPV copolymers: Effect of side-chain nature and length on photophysical and photovoltaic properties
2009
Rupali Jadhav1,2, Stefan Turk3, Florian Kuhnlenz1, Vera Cimrova4, Silke Rathgeber5, Daniel A. M. Egbe*,2,3, and Harald Hoppe**,1 1 Institute of Physics, Ilmenau University of Technology, Weimarer Str. 32, 98693 Ilmenau, Germany 2 Linz Institute for Organic Solar Cells (LIOS), Johannes Kepler University Linz, Altenbergerstr. 69, 4040 Linz, Austria 3 Institute for Print and Media Technology, Chemnitz University of Technology, Reichenhainer Str. 70, 09126 Chemnitz, Germany 4 Institute of Macromolecular Chemistry, Academy of Sciences of the Czech Republic, Heyrovský Sq. 2, 162 06 Prague 6, Czech Republic 5 Johannes Gutenberg-University Mainz, Staudingerweg 7, 55128 Mainz, Germany
Influence of temperature on the synthesis of thiol-stabilized CdTe nanoparticles in aqueous solutions
2010
We have investigated the evolution of thiol-capped cadmium telluride nanocrystals prepared in aqueous solutions at low and room temperature followed by heating at 50–100 °C. The UV–visible absorption spectra, as well as transmission electron microscopy, atomic force microscopy, and dynamic light scattering observations made it possible to reveal differences in size and structure originating from different heating temperatures. It was shown that minimization of the nucleation process temperature provided formation of larger nanoparticles than at higher temperatures.
Interaction between nitroxyl radicals and CdTe quantum dots: Determination of fluorescence-quenching mechanisms in aqueous solution
2019
Abstract The present work characterizes the optical properties of CdTe quantum dots (CdTe QDs) after interaction with nitroxyl radicals based on steady-state and time-resolved fluorescence spectroscopy studies. QDs of different sizes were exposed to 2 different nitroxyl radicals, i.e., TEMPO and 4-amino-TEMPO radicals. A clear dependence of dynamic and static Stern-Volmer constants values, KD and KS, respectively, was observed as a function of the size of QDs used, with a change from a mostly static mechanism (for smaller QD sizes) to a dynamic mechanism predominating as the nanoparticles increase in size. All observed effects are dependent on both the concentration of the radical and the s…
Artificial Neural Networks to Predict the Power Output of a PV Panel
2014
The paper illustrates an adaptive approach based on different topologies of artificial neural networks (ANNs) for the power energy output forecasting of photovoltaic (PV) modules. The analysis of the PV module’s power output needed detailed local climate data, which was collected by a dedicated weather monitoring system. The Department of Energy, Information Engineering, and Mathematical Models of the University of Palermo (Italy) has built up a weather monitoring system that worked together with a data acquisition system. The power output forecast is obtained using three different types of ANNs: a one hidden layer Multilayer perceptron (MLP), a recursive neural network (RNN), and a gamma m…
Assessment of the Operating Temperature of Crystalline PV Modules Based on Real Use Conditions
2014
Determining the operating temperatureTcof photovoltaic panelsPVis important in evaluating the actual performance of these systems. In the literature, different correlations exist, in either explicit or implicit forms, which often do not account for the electrical behaviour of panels; in this way, estimatingTcis based only on the passive behaviour of thePV. In this paper, the authors propose a new implicit correlation that takes into account the standard weather variables and the electricity production regimes of aPVpanel in terms of the proximity to the maximum power points. To validate its reliability, the new correlation was tested on two different PV panels (Sanyo and Kyocera panels) and…
Modelling and analysis of real-world wind turbine power curves: Assessing deviations from nominal curve by neural networks
2019
Abstract The power curve of a wind turbine describes the generated power versus instantaneous wind speed. Assessing wind turbine performance under laboratory ideal conditions will always tend to be optimistic and rarely reflects how the turbine actually behaves in a real situation. Occasionally, some aerogenerators produce significantly different from nominal power curve, causing economic losses to the promoters of the investment. Our research aims to model actual wind turbine power curve and its variation from nominal power curve. The study was carried out in three different phases starting from wind speed and related power production data of a Senvion MM92 aero-generator with a rated powe…
Deep learning strategies for automatic fault diagnosis in photovoltaic systems by thermographic images
2021
Abstract Losses of electricity production in photovoltaic systems are mainly caused by the presence of faults that affect the efficiency of the systems. The identification of any overheating in a photovoltaic module, through the thermographic non-destructive test, may be essential to maintain the correct functioning of the photovoltaic system quickly and cost-effectively, without interrupting its normal operation. This work proposes a system for the automatic classification of thermographic images using a convolutional neural network, developed via open-source libraries. To reduce image noise, various pre-processing strategies were evaluated, including normalization and homogenization of pi…
New European Wind Atlas: Microscale Atlas
2021
Wind Atlas layers from the New European Wind Atlas (NEWA) microscale atlas. The atlas was made by downscaling the NEWA mesoscale wind atlas using the Wind Atlas Analysis and Application Program (WAsP) microscale model.Data are accessible through doWIND, an instance of daTap (RESTfull API for data aggregation and subsetting)
Building integrated solar thermal design: assessment of performances of a low cost solar wall in a typical Italian building
2016
Abstract Present work deals with the topic of building integration of solar thermal collector (BIST) as a refurbishment measure. Such equipment, more than its main function as heating generator, plays a specific role as a building component (envelope finishes, thermal insulation layer, roof cover etc). Consequently, from a heat transfer point of view, an integrated component affects twice the global building balance: supporting the thermal plant (i.e. providing heat for final uses) and modifying the wall heat-transfer pattern (i.e. reducing thermal losses). In turn, the collector performance itself is influenced by the wall structure (back losses reduction). Present work proposes a method f…