Search results for "photovoltaics"
showing 10 items of 178 documents
Numerical Procedures and their Practical Application in PV Module Analyses. Part IV: Atmospheric Transparency Parameters - Application
2020
Abstract The presented article relates to aspects of PV module testing using natural sunlight in outdoor conditions. It is a continuation of the article Part III: parameters of atmospheric transparency - determining and correlations. This article discusses the practical application of the indexes: atmosphere purity - k Tm , diffused component content - k s/o , beam clear sky index - K b - in testing various modules in outdoor conditions. Their influence on the conversion of modules made from various absorbers and various technologies is demonstrated. Their practical application in module testing in outdoor conditions is described and it - has been demonstrated that the results of the analys…
Photovoltaics: solar energy resources and the possibility of their use
2016
Abstract In this paper possibilities and limits of use of solar energy (like the best efficiencies of PV cells, world records and ‘notable exceptions’) were shown. Also some new ideas and concepts in photovoltaics (like new photovoltaic power plants or energy storage) were presented. Additionally authors try to predict development of solar power industry.
Fabrication and characterization of low cost Cu 2 O/ZnO:Al solar cells for sustainable photovoltaics with earth abundant materials
2016
Abstract The low cost electrodeposition method was used to grow Cu2O thin films and experimentally determine the optimal absorber layer thickness. Raman scattering studies indicate the presence of solely crystalline Cu2O and SEM images show that the thin films consist of grains with a pyramidal shape. The influence of the thickness of the light absorbing Cu2O layer on the basic characteristic of the heterojunction and their properties have been investigated using reflectivity, current–voltage (J–V), capacitance–voltage (C–V) and the external quantum efficiency (EQE) measurements. The depletion layer, the charge collection length of the minority carrier, and reflectivity are the main factors…
Ion track template technology for fabrication of CdTe and CdO nanocrystals
2020
Abstract CdTe and CdO nanocrystals were synthesized by chemical deposition into a-SiO2/n-Si ion track template formed by 200 MeV Xe ion irradiation with the fluence of 108 ions/cm2. Depending on the temperature of the solution CdTe + CdO and single-phase CdO with a hexagonal crystal structure were obtained, respectively. The study of the current – voltage characteristics of the obtained structure with the single-phase CdO allows us to estimate the number of grain boundaries and the height of the potential barrier, as well as the n-type conductivity.
Radiation hardness studies of CdTe and for the SIXS particle detector on-board the BepiColombo spacecraft
2009
Abstract We report of the radiation hardness measurements that were performed in the developing work of a particle detector on-board ESA's forthcoming BepiColombo spacecraft. Two different high- Z semiconductor compounds, cadmium telluride (CdTe) and mercuric iodide (HgI 2 ), were irradiated with 22 MeV protons in four steps to attain the estimated total dose of 10 12 p / cm 2 for the mission time. The performance of the detectors was studied before and after every irradiation with radioactive 55 Fe source Mn K α 5.9 keV emission line. We studied the impact of the proton beam exposure on detector leakage current, energy resolution and charge collection efficiency (CCE). Also the reconstruct…
Five-years-long effects of the Italian policies for photovoltaics on the energy demand coverage of grid-connected PV systems installed in urban conte…
2016
Abstract The paper examines the responsiveness of the electricity demand coverage in urban contexts to the changes in the Italian policies for PV systems. The morphological configuration of building roofs according to the number of covered flats, annual data of PV generation and electricity consumptions were considered in the transition from the feed-in tariff (FIT) mechanism to the tax credits scheme currently in force. With the aim of assessing the changes over time in three representative cities, the fluctuations both in the premiums for the produced electricity and the tax credits applied to the PV system costs were observed from July 2010 to February 2016. Furthermore, the main time-va…
3-Phase grid-connected building integrated photovoltaic system with reactive power control capability
2020
Abstract Recently, a tendency in the growing of grid-connected building integrated photovoltaic (BIPV) systems has been noticed in most countries. Hence, high penetration of PV power into the system network can be observed in many points in the network. This may cause severe problems on the distribution network due to the intermittent nature of PV systems. As a feasible solution, the reactive power capability of voltage source inverter in PV systems can be employed rather than approaching expensive grid infrastructures in the distribution network. The purpose of this study is to implement a 3-phase grid-connected (BIPV) system with reactive power control to regulate the system voltage and i…
Plasmonic modes in molybdenum ultra-thin films suitable for hydrogenated amorphous silicon thin film solar cells
2014
We have recently demonstrated that molybdenum ultra-thin films interposed between hydrogenated amorphous silicon (a-Si:H) and SnO2:F transparent conductive oxide (TCO) in thin film solar cells show light trapping effects which enhance the solar cells performances. The effect of this improvement may be attributed to surface plasmon polariton (SPP) modes excited at the molybdenum interface by the solar radiation. In this paper we show direct evidence of such SPP modes in the case of the molybdenum/air interface by using the attenuated total reflection (ATR) technique, pioneered by Kretschmann, and we evaluate the dielectric constant of molybdenum at 660 nm. (C) 2013 The Authors. Published by …
Influence of temperature on the synthesis of thiol-stabilized CdTe nanoparticles in aqueous solutions
2010
We have investigated the evolution of thiol-capped cadmium telluride nanocrystals prepared in aqueous solutions at low and room temperature followed by heating at 50–100 °C. The UV–visible absorption spectra, as well as transmission electron microscopy, atomic force microscopy, and dynamic light scattering observations made it possible to reveal differences in size and structure originating from different heating temperatures. It was shown that minimization of the nucleation process temperature provided formation of larger nanoparticles than at higher temperatures.
Interaction between nitroxyl radicals and CdTe quantum dots: Determination of fluorescence-quenching mechanisms in aqueous solution
2019
Abstract The present work characterizes the optical properties of CdTe quantum dots (CdTe QDs) after interaction with nitroxyl radicals based on steady-state and time-resolved fluorescence spectroscopy studies. QDs of different sizes were exposed to 2 different nitroxyl radicals, i.e., TEMPO and 4-amino-TEMPO radicals. A clear dependence of dynamic and static Stern-Volmer constants values, KD and KS, respectively, was observed as a function of the size of QDs used, with a change from a mostly static mechanism (for smaller QD sizes) to a dynamic mechanism predominating as the nanoparticles increase in size. All observed effects are dependent on both the concentration of the radical and the s…