Search results for "physical chemistry"
showing 10 items of 1199 documents
Structure-dependent tuning of electro-optic and thermoplastic properties in triphenyl groups containing molecular glasses
2015
Abstract The series of seven molecular compounds composed of D–π–A chromophores and triphenylmethyl auxiliary groups were characterized by UV–Vis spectroscopy, differential scanning calorimetry and quantum chemical calculations. Nonlinear optical (NLO) properties of compounds were determined by second harmonic generation measurements in corona poled thin glassy films. The results show that triphenylmethyl auxiliary groups are effective at shielding undesirable dipole interactions in solid phase thus increasing NLO efficiency of materials. Thermal stability up to 108 °C was achieved for a polar order in poled samples.
Photocatalytic degradation enhancement in pickering emulsions stabilized by solid particles of bare TiO 2
2019
Pickering emulsions provide a new way to enhance the efficiency of photocatalytic degradation of water-insoluble pollutants. Indeed, the semiconductor solid particles dually act as the photocatalyst and stabilizer of the emulsion droplets whose size dramatically affects the photocatalytic reaction. The present work aims at the validation of this concept by using bare TiO 2 without any surface modification. Nanostructured TiO 2 has been prepared by a simple sol-gel process and characterized by X-ray diffraction, specific surface area analysis, scanning electron microscopy, and diffuse reflectance spectroscopy. The emulsions were prepared by using 1-methylnaphthalene (1-MN) as a model organic…
New insight on the lithium hydride–water vapor reaction system
2018
Abstract The reaction of lithium hydride (LiH) powder with pure water vapor (H2O and D2O) was studied by thermogravimetry and in situ infrared spectroscopy at 298 K over a large pressure range. The mean particle size of LiH is around 27 μm. At very low pressure, the hydrolysis starts with the formation of lithium oxide (Li2O). Then, both Li2O and lithium hydroxide (LiOH) are formed on increasing pressure, thus, creating a Li2O/LiOH bilayer. The reaction takes place through the consumption of LiH and the formation of Li2O at the LiH/Li2O interface and through the consumption of Li2O and the formation of LiOH at the Li2O/LiOH interface. Above 10 hPa, only the monohydrate LiOH·H2O is formed. T…
First principles modeling of Ag adsorption on the LaMnO3 (001) surfaces
2015
Abstract Doping of oxide surfaces with Ag atoms could improve their catalytic properties, e.g. for solid oxide fuel cell and oxygen permeation membrane applications. We present results of the ab initio calculations of Ag adsorption on the LaMnO 3 (LMO) (001) surfaces. The energetically most favorable adsorption sites for low coverage of Ag atoms and monolayer on both MnO 2 - and LaO-terminations have been determined. The electron charge transfer between Ag and substrate and interatomic distances have been analyzed. The Ag atom migration along the MnO 2 surface is ~ 0.5 eV which could lead to a fast clustering of adsorbates at moderate temperatures whereas the adhesion energy of silver monol…
Electronic structure and thermodynamic stability ofLaMnO3andLa1−xSrxMnO3(001) surfaces:Ab initiocalculations
2008
We present the results of ab initio hybrid density-functional calculations of the atomic and the electronic structures of ${\text{LaMnO}}_{3}$ (LMO) and ${\text{La}}_{1\ensuremath{-}{x}_{b}}{\text{Sr}}_{{x}_{b}}{\text{MnO}}_{3}$ (001) surfaces. The total energies obtained from these calculations were used to analyze thermodynamic stability of the surfaces. We predict Sr and O vacancy segregation to the surface to occur with similar energies ($\ensuremath{\sim}0.5\text{ }\text{eV}$ per defect). In pure LMO only ${\text{MnO}}_{2}$ termination is thermodynamically favorable under typical operational conditions of a cathode in solid oxide fuel cells, whereas Sr doping makes La(Sr)O termination …
Nanodroplets on a solid plane: wetting and spreading in a Monte Carlo simulation
2002
Abstract The wetting behavior and spreading dynamics of small polymer melt droplets in the course of transition from partial to complete wetting conditions on a flat structureless solid substrate have been studied by dynamic Monte Carlo simulation. From the density profiles of the drops we determine the contact angles at varying strength of the van der Waals surface forces in the whole interval of partial wetting. The validity of Young's equation is then tested whereby the surface tension of the melt/vapor interface is derived independently from interfacial fluctuation analysis, and the surface free energy of the melt at the substrate—from the anisotropy of the local pressure at the wall. T…
Dynamic heterogeneity in polymer electrolytes. Comparison between QENS data and MD simulations
2001
Abstract We have investigated the dynamics of poly(ethylene oxide) (PEO) lithium-based salt electrolytes (PEO–LiBETI) using quasi-elastic neutron scattering (QENS). Measurements were carried out on the spectrometer NEAT (HMI, Berlin) above the melting temperature of PEO ( T m ≈65°C). The experimental data fully support the Molecular Dynamics (MD)-derived model of a heterogeneous dynamics in dilute PEO-salt electrolytes. In agreement with MD simulations carried out on PEO–LiPF 6 , we find evidences for the existence of two dynamic processes: (a) a faster process that is described in terms of the pure PEO dynamics and (b) a second component which we identify with the slower motion of the PEO …
Thermal behavior of ethylene copolymers with di- and tri-alkenylsilsesquioxane comonomers synthesized by post-metallocene catalysts
2020
AbstractThis paper reported thermal properties of ethylene copolymers with di- and tri-alkenylsilsesquioxanes (POSS) synthesized by bis(phenoxy-imine) Ti, Zr, V, and V salen-type complexes. Ethylene copolymers with multi-alkenyl POSS obtained by such complexes contain multi-alkenyl POSS incorporated into the polymer chain as a side group. They were characterized by different thermal behavior depending on the kind of multi-alkenyl POSS comonomer, and type of the catalyst used, as well as polymerization conditions and thus the structure of the copolymer chain. Ethylene/POSS copolymers differed in incorporation of POSS into the polymer chain, content of specific unsaturation groups, and molecu…
Local environment of Barium, Cerium and Yttrium in BaCe1−xYxO3−δ ceramic protonic conductors
2007
Abstract Y-doped barium cerate protonic conductors with composition BaCe 1 − x Y x O 3 − δ ( x = 0.02, 0.1, 0.2, 0.3) have been synthesized by sol–gel route, giving by X-ray diffraction tests a homogeneous crystalline phase. A commercial sample BaCe 0.8 Y 0.2 O 3 − δ produced by combustion spray pyrolysis was also provided for comparison aim. The local structure around the cations was studied by X-ray absorption spectroscopy at the K-edges of Ba, Ce and Y. It is demonstrated that the insertion of yttrium in the site of cerium produces a remarkable local distortion of the dopant first-shell octahedral environment that affects also the next coordination shells by a static disorder increas…
Focus on the Essential: Extracting the Decisive Energy Barrier of a Complex Process
2019
Molecular processes at surfaces can be composed of a rather complex sequence of steps. The kinetics of even seemingly simple steps are demonstrated to depend on a multitude of factors, which prohibits applying a simple Arrhenius law. This complexity can make it challenging to experimentally determine the kinetic parameters of a single step. However, a molecular-level understanding of molecular processes such as structural transitions requires elucidating the atomistic details of the individual steps. Here, a strategy is presented to extract the energy barrier of a decisive step in a very complex structural transition by systematically addressing all factors that impact the transition kineti…