Search results for "physics.class-ph"
showing 10 items of 334 documents
3D part inspection path planning of a laser scanner with control on the uncertainty
2011
International audience; This article concerns the measurement process of mechanical parts using laser scanners. From the point of view of industrial applications, the objective is to guarantee the measurement accuracy during the scanning with regard to the geometrical product specifications. The proposed method can be summarized as follow: the first step consists of analyzing the interval of tolerance for the different specifications and to attribute to every geometrical entity a maximal uncertainty of measurement. This uncertainty depends on the angle of incidence between the laser plane and the scanned surface. In the second step, an approach based on the concept of visibility is used fro…
Using of a uncertainty model of an polyarticulated coordinates measuring arm to validate the measurement in a manufacturing processsus
2014
International audience; Coordinates Measuring Arms (CMA) are increasingly used to control industrial parts and are often an alternative to CMM controls that require conditions of laboratory measurement and involve significant costs. However, the control of uncertainties is often not guaranteed because the measurement process is complex and there is no standard for setting a framework qualification process of the measurement process.The proposed study, in this paper, is a first approach to model the measurement uncertainties of a CMA with contact sensor. The problem is complex because there are many sources of uncertainty, largely due to variability in the handling carried out by the operato…
3D Displacements and Strains Solid Measurement based on the Surface Texture with a Scanner Laser
2013
International audience; The developments of non-contact measurement are today widely due to the unprecedented progress of optronic. The applications of these techniques are wide and varied for the 3D measurement of industrial products. In addition to the forms and dimensions, we show in this paper that the devices of laser scanning permit to measure displacements and deformations. In this case, it is necessary to follow a solid particle in its motion. It is then necessary to identify the particle between two configurations of the body before and after displacement. The method of greyscale patterns, obtained by applying a spray, is generally used. The originality of the proposed method is ba…
A physical-based constitutive model for surface integrity prediction in machining of OFHC copper
2017
International audience; Due to the rising interest in predicting machined surface integrity and sustainability, various models for metal cutting simulation have been developed. However, their accuracy depends deeply on the physical description of the machining process. This study aims to develop an orthogonal cutting model for surface integrity prediction, which includes a physical-based constitutive model of Oxygen Free High Conductivity (OFHC) copper. This constitutive model incorporates the effects of the state of stress and microstructure on the work material behavior, as well as a dislocation density-based model for surface integrity prediction. The coefficients of the constitutive mod…
Influence of cutting process mechanics on surface integrity and electrochemical behavior of OFHC copper
2014
The authors gratefully acknowledge the support received from IC ARTS and CEA Valduc; International audience; Superfinishing machining has a particular impact on cutting mechanics, surface integrity and local electrochemical behavior. In fact, material removal during this process induces geometrical, mechanical and micro-structural modifications in the machined surface and sub-surface. However, a conventional 3D cutting process is still complex to study in terms of analytical/numerical modeling and experimental process monitoring. So, researchers are wondering if a less intricate configuration such as orthogonal cutting would be able to provide information about surface integrity as close as…
Orthogonal cutting simulation of OFHC copper using a new constitutive model considering the state of stress and the microstructure effects
2016
International audience; This work aims to develop an orthogonal cutting model for surface integrity prediction, which incorporates a new constitutive model of Oxygen Free High Conductivity (OFHC) copper. It accounts for the effects of the state of stress on the flow stress evolution up to fracture. Moreover, since surface integrity parameters are sensitive to the microstructure of the work material, this constitutive model highlights also the recrystallization effects on the flow stress. Orthogonal cutting model is validated using experimental designed cutting tests. More accurate predictions were obtained using this new constitutive model comparing to the classical Johnson-Cook model.
Parameters analysis influencing 3D measurement without contact by laser scanner to establish a local correction procedure
2007
International audience; The techniques of measuring without contact by laser scanning allows acquisition of a large number of points, at a very high rate speed ; nevertheless with less precision than the one obtained by classical techniques of measuring with contact. We present in this article the research and the experimental analysis of the influential parameters on the precision of the measure by laser sensor without contact. Firstly, a methodology of correction of the relative uncertainties in the conditions of the measuring laser is presented. Then, we apply it to a typical part and compare the results to those obtained by a classical procedure of measuring with a contact sensor. We fi…
3D digitizing path planning for part inspection with laser scanning
2007
If the first work relating to the automation of the digitalization of machine elements goes back to approximately 25 years, the process of digitalization of parts with non-contact sensor remains nevertheless complex. It is not completely solved today, in particular from a metrological point of view. In this article, we consider the determination of the trajectory planning within the framework of the control of dimensional and geometrical specifications. The sensor used in this application is a laser planner scanner with CCD camera oriented and moved by a CMM. For this purpose, we have focused on the methodology used to determine the best possible viewpoints which will satisfy the digitizing…
Taking digitized points quality into account in geometrical specification measurement by laser sensor
2004
International audience; Today, the new measurement techniques without contact like the laser sensors are used more and more in industrial applications. They allow to obtain many points in a short time. However these techniques have a less good accuracy than the classical process with contact probe for metrology application. The work presented in this paper, is part of a research project on the in-process product inspection. In the case of in-process product inspection, the throughput time must be the shortest with a good dimensional accuracy. So, it is necessary to increase the measurement accuracy of the points cloud for using the laser scanners. For this first approach, we suggest to buil…
Modelling of interference fits with taking into account surfaces roughness with homogenization technique
2013
International audience; The assembly technique by shrink fit is increasingly used today because it allows for the assembly of two pieces without any intermediary part simply by the tightening effect given by the difference in diameters of the two parts assembled. The definition of assemblies depends on calculation models available in the standard. They make very restrictive assumptions that limit the geometrical defects and the surface finish. It is increasingly common to use a finite element method to better adapt the model to the complex forms of industrial parts. However, the standard is limited with regard to the consideration of roughness which results in a loss of tightening. An easy …