Search results for "plasmon"

Molecular-mediated assembly of silver nanoparticles with controlled interparticle spacing and chain length

2012

In the present work, we report on a one-pot method for the assembly of noble metal nanoparticles with tunable optical properties, assembly length and interparticle spacing. The synthetic colloidal route is based on the covalent binding among OH-terminated silver nanoparticles by means of dicarboxylic acids with a defined molecular length. As a result, the initially symmetric plasmon band of silver nanoparticles splits into two plasmonic modes when nanoparticles are assembled due to the strong near-field plasmon coupling. We noticed a very good correlation between the plasmon wavelength shift and the interparticle spacing that is represented by the universal scaling law of the surface plasmo…

Chip-to-chip plasmonic interconnects and the activities of EU project NAVOLCHI

2012

In this paper, the chip-to-chip interconnection architecture adopted by the EU-project NAVOLCHI are discussed. The plasmonic physical layer consisting of a plasmonic nanoscale laser, a modulator, an amplifier and a detector is introduced. Current statuses of the plasmonic devices are reviewed.

Antenna Tapering Strategy for Near-Field Enhancement Optimization in Terahertz Gold Nanocavities

2019

Plasmonic nanoantennas (NAs) have received a growing attention in recent years due to their ability to confine light on sub-wavelength dimensions [1]. More recently, this property has been exploited in the terahertz (THz) frequency range (0.1–10 THz) for enhanced sensing and spectroscopy [2], as well as for more fundamental investigations [3]. These applications typically require high local electric fields that can be achieved by concentrating THz radiation into deeply sub-wavelength volumes located at the NAs extremities. However, the achievable near-field enhancement values are severely limited by the poor resonance quality factor of traditional rod-shaped THz NAs. Unlike what is commonly…

Thermo-optic control of dielectric-loaded plasmonic waveguide components

2010

International audience; We report preliminary results on the development of compact (length 20%) is demonstrated with MZI-and WRR-based components, and efficient (similar to 30%) rerouting is achieved with DC switches. (C) 2010 Optical Society of America

2014

Hard x-ray photoelectron spectroscopy (HAXPES) is used to investigate the intrinsic electronic properties of single crystal epitaxial CdO(100) thin films grown by metal organic vapor phase epitaxy (MOVPE). The reduced surface sensitivity of the HAXPES technique relaxes stringent surface preparation requirements, thereby allowing the measurement of as-grown samples with intrinsically higher carrier concentration (n=2.4×1020cm−3). High-resolution HAXPES spectra of the valence band and core levels measured at photon energy of 6054 eV are presented. The effects of conduction band filling and band gap renormalization are discussed to explain the observed binding energy shifts. The measured bandw…

CMOS plasmonics in WDM data transmission: 200 Gb/s (8 × 25Gb/s) transmission over aluminum plasmonic waveguides

2018

We demonstrate wavelength-division-multiplexed (WDM) 200 Gb/s (8 × 25 Gb/s) data transmission over 100 μm long aluminum (Al) surface-plasmon-polariton (SPP) waveguides on a Si3N4 waveguide platform at telecom wavelengths. The Al SPP waveguide was evaluated in terms of signal integrity by performing bit-error-rate (BER) measurements that revealed error-free operation for all eight 25 Gb/s non-return-to-zero (NRZ) modulated data channels with power penalties not exceeding 0.2 dB at 10−9. To the best of our knowledge, this is the first demonstration of WDM enabled data transmission over complementary-metal-oxide-semiconductor (CMOS) SPP waveguides fueling future development of CMOS compatible …

Optical properties of thin metal films with nanohole arrays on porous alumina–aluminum structures

2015

A multilayer system is formed by the deposition of a 10–35 nm thin Au or Ag film with 18–25 nm diameter holes on 75–280 nm thick layers of porous anodized aluminum oxide (AAO) supported by a bulk sheet of aluminum. We present a detailed study of system parameters, which influence the optical response, including the porosity, metal layer thickness and crystallographic orientation of the Al substrate. The spectral properties are mainly governed by the interference of the reflections from the Al substrate and the thin metal film separated by the AAO layer. An enhanced plasmonic attenuation component near 650 nm for the Au films with holes can be observed when the interferometric anti-reflectio…

Tuning the propagation constant by the anti-crossing bandgap prism coupling technique.

2012

A novel plasmonic structure based on an anticrossing bandgap prism coupling technique is proposed. The study has been carried out using photonic crystals based on diffraction gratings (bounded by dielectrics with identical dielectric functions) together with a high refractive index prism to couple the long-range surface plasmon polaritons to photons. We analyse the structure and demonstrate the ability for tuning the propagation constants of plasmon modes by changing the thickness of the gold grating. The comparison to non-bandgap techniques is studied, and the influence of the plasmonic configuration on the plasmon propagation constant is discussed as well. Experimental measurements were a…

Polarimetric Plasmonic Sensing with Bowtie Nanoantenna Arrays

2015

We propose a polarimetric plasmonic biosensor based on bowtie nanoantenna array transducers. Through numerical simulations, based on the finite element method (FEM), we study the phase retardation between the components of light polarized parallel and perpendicular to the major axis of the bowties within the arrays. From a design for high volumetric sensitivity at a wavelength of 780 nm, sensitivities ∼5 rad/RIU is obtained, corresponding to a detection limit of ∼10−7 when using a polarimetric readout platform. Similarly, surface sensitivity of the same array is evaluated by simulating the phase retardation changes induced by the coverage of bioreceptors and analytes of the metallic nanostr…

Strong enhancement of the Breit-Wigner-Fano Raman line in carbon nanotube bundles caused by plasmon band formation

2002

We investigate the origin of the Breit-Wigner-Fano line in the Raman spectra of individual single-walled carbon nanotubes and their bundles. Using confocal Raman microscopy and atomic-force microscopy we found that the Breit-Wigner-Fano line intensity increases strongly with the bundle thickness. We confirmed this result by Raman investigations of partially decomposed bundles, which were additionally investigated by transmission electron microscopy. Our random-phase approximation based theory, which identifies the Breit-Wigner-Fano line as an excited band of plasmon-phonon modes, is fully consistent with the experimental results.