Search results for "plasticity"
showing 10 items of 765 documents
Powder metallurgy processing and deformation characteristics of bulk multimodal nickel
2014
cited By 7; International audience; Spark plasma sintering was used to process bulk nickel samples from a blend of three powder types. The resulting multimodal microstructure was made of coarse (average size ∼ 135 μm) spherical microcrystalline entities (the core) surrounded by a fine-grained matrix (average grain size ∼ 1.5 μm) or a thick rim (the shell) distinguishable from the matrix. Tensile tests revealed yield strength of ∼ 470 MPa that was accompanied by limited ductility (∼ 2.8% plastic strain). Microstructure observation after testing showed debonding at interfaces between the matrix and the coarse entities, but in many instances, shallow dimples within the rim were observed indica…
Energy criteria of multiaxial fatigue failure
1999
This paper contains a review of energy-based criteria of multiaxial fatigue. The criteria have been divided into three groups, depending on the kind of strain energy density per cycle which is assumed as a damage parameter. They are: (i) criteria based on elastic strain energy for high-cycle fatigue; (ii) criteria based on plastic strain energy for low-cycle fatigue; and (iii) criteria based on the sum of plastic and elastic strain energies for both low- and high-cycle fatigue. The criteria which take into account strain energy density in the critical plane seem to be the most promising. In the energy approach to multiaxial fatigue there is an important unsolved problem, i.e. the evaluation…
Coupled hydro-mechanical analysis of compacted bentonite behaviour during hydration
2021
Abstract This study analyses the response of compacted bentonites upon hydration based on a coupled hydro-mechanical elasto-plastic framework. As an alternative to multi-porosity interpretation, the framework was selected based on the experimental evidence of adsorbed water behaviour in bentonites and the volumetric response at saturated states, apparently independent of its initial state. Based on these premises, a water retention model was formulated using an explicit distinction between adsorbed water and free water, enabling the postulation of the water properties and behaviour depending on its state. In order to effectively account for the transition between unsaturated to saturated st…
Elastoplastic Damaging Model for Adhesive Anchor Systems. II: Numerical and Experimental Validation
2011
This paper presents the numerical and experimental validation of the analytical elastoplastic damaging model proposed in the companion paper (Part I). The validation was carried out by describing the pullout failure of epoxy adhesive anchors. Pullout tests were simulated numerically and performed experimentally. Several specimens made of a rebar embedded in a hardened concrete cylinder by means of polyester resin were tested. Conventional strain gauges and acoustic emission (AE) sensors were used to evaluate the structural response of the system and to monitor the onset and progression of structural damage, respectively. The parametric analysis and the moment tensor analysis of the AE data …
Interfacial energy effects within the framework of strain gradient plasticity
2009
AbstractIn the framework of strain gradient plasticity, a solid body with boundary surface playing the role of a dissipative boundary layer endowed with surface tension and surface energy, is addressed. Using the so-called residual-based gradient plasticity theory, the state equations and the higher order boundary conditions are derived quite naturally for both the bulk material and the boundary layer. A phenomenological constitutive model is envisioned, in which the bulk material and the boundary layer obey (rate independent associative) coupled plasticity evolution laws, with kinematic hardening laws of differential nature for the bulk material, but of nondifferential nature for the layer…
Elastic-Viscoplastic Solids Subjected to Thermal and Loading Cycles
1995
— A class of elastic-viscoplastic materials with dual internal variables, thermodynamic potential and temperature-dependent plastic and creep data is considered. For solids (or structures) of such materials, subjected to cyclic loads and temperature variations, the existence of a steady-state response is ascertained and its periodicity characteristics established. Particular steady-state responses, like, elastic and inelastic shakedown, are addressed. By means of a sensitivity analysis of the steady cycle with respect to the load parameter changes, a number of basic features of inelastic shakedown (the viscoplastic counterpart of plastic shakedown) are also addressed.
Friction Stir Welding of steels process design through a continuum based fem model
2009
AbstractFriction stir welding (FSW) has been reaching a continuously increasing popularity among joining processes since its invention in 1991. Although mainly used for aluminium alloys, it has been successfully applied also to steels. In the present paper, a continuum based FEM model for FSW of steels is proposed, which is three-dimensional Lagrangian implicit, coupled, rigid viscoplastic. The model, whose potential has been analysed through temperature distribution comparisons, is able to predict temperature, strain and strain rate distributions, together with thermal and mechanical loads on the welding tool, at varying main process variables. In this way, the FEM model can be used for pr…
Material Flow in FSW of AA7075 - T6 butt joint: numerical simulations and experimental verifications
2006
Friction stir welding (FSW) has reached a large interest in the scientific community and in the recent years also in the industrial environment, owing to the advantages of such solid state welding process with respect to the classic ones. Advanced finite element method tools are needed in order to develop an effective engineering of the processes; quantitative results can be acquired from numerical simulations once the basic information such as the material flow is certain. A 3D Lagrangian implicit coupled rigid viscoplastic model has already been developed by the authors to simulate FSW of butt joints. In the present paper the material flow in the FSW of AA7075–T6 butt joints is investigat…
Linear and nonlinear fractional hereditary constitutive laws of asphalt mixtures
2016
The aim of this paper is to propose a fractional viscoelastic and viscoplastic model of asphalt mixtures using experimental data of several tests such as creep and creep recovery performed at different temperatures and at different stress levels. From a best fitting procedure it is shown that both the creep one and recovery curve follow a power law model. It is shown that the suitable model for asphalt mixtures is a dashpot and a fractional element arranged in series. The proposed model is also available outside of the linear domain but in this case the parameters of the model depend on the stress level.
Size effects on the plastic collapse limit load of thin foils in bending and thin wires in torsion
2011
Abstract Following a previous paper by the author [Strain gradient plasticity, strengthening effects and plastic limit analysis, Int. J. Solids Struct. 47 (2010) 100–112], a nonconventional plastic limit analysis for a particular class of micron scale structures as, typically, thin foils in bending and thin wires in torsion, is here addressed. An idealized rigid-perfectly plastic material is considered, which is featured by a strengthening potential degree-one homogeneous function of the effective plastic strain and its spatial gradient. The nonlocal (gradient) nature of the material resides in the inherent strengthening law, whereby the yield strength is related to the effective plastic st…