Search results for "plasticizer"
showing 10 items of 63 documents
Fluidizing efficiency of comb-like superplasticizers: The effect of the anionic function, the side chain length and the grafting degree
2015
Superplasticizers and especially polycarboxylate grafted polyethylene oxide (PCE) demonstrated their efficiency to fluidify concrete. The aim of this work is to investigate the evolution of the fluidity as a function of adsorption in a sulfated solution with a wide variety of comb-like superplasticizers and at incomplete adsorption rate. Polymers with various side chain lengths, grafting ratios and also with modified anionic functions (carboxylate, dicarboxylate and phosphate) were synthesized. Inert calcite suspensions were used to mimic early age cementitious materials avoiding the cement hydration. Models of polymer conformation and yield stress prediction have been tested. But the most …
Hydrothermal ageing of radiation cured epoxy resin-polyether sulfone blends as matrices for structural composites
2010
Abstract The hydrothermal ageing of epoxy–thermoplastic blends, used as matrices for carbon fibre composites, cured by electron beam, has been studied. Two different thermoplastic percentages have been adopted. A suitable choice of both curing process and formulation parameters allows to carry out irradiation at mild temperature with several advantages, coming from a “non thermal” process, for both the final properties of the materials and the environment. Nevertheless the occurring of vitrification phenomena needs the use of a short thermal treatment after irradiation on the already solid materials, in order to complete the cure reactions. Radiation cured epoxy based matrices have been sub…
Interactions between aroma and edible films. 1. Permeability Of methylcellulose and low-density polyethylene films to methyl ketones.
1998
This work contributes to the study of aroma transfers through edible and plastic packaging films. Permeability, sorption, and diffusivity of three methyl ketones (2-heptanone, 2-octanone, and 2-nonanone) in and through low-density polyethylene and methylcellulose-based edible films have been determined. Permeability was measured using a dynamic method coupled with a gas chromatograph. The methyl ketone permeability of polyethylene films mainly depends on diffusivity of the penetrant in the polymer. In the case of 2-heptanone, a saturation of the polymer network is observed at high vapor concentrations. The formation of clusters could take place when concentrations are higher in the vapor ph…
Interaction in POSS-poly(ethylene-co-acrylic acid) nanocomposites
2013
Use of polyhedral oligomeric silsesquioxane (POSS) in polymer-based nanocomposites is promising for the design of high-performance materials for several applications. In this study, nanocomposites based on ethylene-acrylic acid (EAA) copolymer and POSS molecules were prepared by melt mixing. In particular, partial cage POSS with different pendent organic groups was used to investigate the interaction between the –OH groups of POSS and the acrylic functionalities of the matrix. All nanocomposites were characterized by mechanical, rheological, thermal and spectroscopic analyses. In addition, PE-POSS compounds were prepared under the same processing conditions for sake of comparison. The POSS …
Characterization and Processability of Blends of Polylactide Acid with a New Biodegradable Medium-Chain-Length Polyhydroxyalkanoate
2015
In this work the processability and the mechanical performance of polylactide acid (PLA) based blends with a sample of a new biodegradable medium-chain-length poly (hydroxyalkanoate) (PHA) were investigated. The two polymers are incompatible with scarce adhesion and with the dispersed PHA particles size increasing with the PHA content. Rheological tests in shear flow indicate that adding PHA improves the processability of the matrix by increasing the content of this second component in the blend, as observed also for the torque curves, due to the very low viscosity of this new sample of PHA. The processability is only slightly worsened in non-isothermal elongational flow as the melt strengt…
Sustainable nanocomposites based on halloysite nanotubes and pectin/polyethylene glycol blend
2013
Abstract This study was focused on the preparation and characterization of biofilms based on pectin/polyethylene glycol 20000 (PEG) blend and halloysite nanotubes (HNTs). The obtained blends loaded with a natural nanoclay are proposed as sustainable alternative to the polymers produced from non-renewable resources such as fossil fuels. Properties of technological interest have been monitored and they were correlated to the structural features of the nanocomposites. It turned out that the wettability of the films can be tuned by changing the composition and the distribution of HNTs into the material as well as the surface roughness. The tensile properties of the blend are enhanced by the pre…
Plasticizer extraction of Taxol infusion solution from various infusion devices.
1996
Taxol solution extracts the plasticizer DEHP (di(2-ethylhexyl)phthalate) from polyvinyl chloride (PVC) materials. In order to minimize patient exposure to DEHP, Taxol solutions should be prepared and administered in PVC-free materials. Particulate matter may form in Taxol infusion solution over time, so that in-line filtration with microporous membranes not greater than 0.22 microns is advisable. The purpose of this study was to evaluate the suitability of various administration- and in-line filter-sets for Taxol application. The extent of leached DEHP was determined using a Reversed Phase HPLC assay specific for DEHP. The four tested administration-sets, labeled as PVC-free, were all found…
Sorption kinetic of aroma compounds by edible bio-based films from marine-by product macromolecules: Effect of relative humidity conditions
2019
International audience; Edible films based on gelatin and chitosan have high gas and aroma barrier properties. This study focused on their capability to sorbed/retain aroma compounds (1-hexanal, 2-hexen-1-ol, 1-hexanol, 3-hexanone and phenol) at three relative humidity level (≤2%, 53% or 84% RH). Whatever the relative humidity condition, the order of sorption is keton (3-hexanone) < aldehyde (1-hexanal) < aliphatic alcohols (2-hexen-1-ol and 1-hexanol) < phenol. This order could be related to the intrinsic chemical properties of aroma compounds. The increase in moisture enhanced the sorption at the highest RH for all the aroma compounds. However, a competition between water and aliphatic al…
How composition and process parameters affect volatile active compounds in biopolymer films
2012
Abstract Active edible films based on chitosan and containing an active aroma compound have been investigated. The influence of the composition of the film forming solution (solvent, plasticizers, nanoparticles, emulsifiers and aroma traps) and process parameters (temperature and viscosity) on drying kinetics, water content, colour, aroma compound retention and partition coefficient was studied. Solvent evaporation rate was increased by addition of ethanol. Water evaporation was delayed by glycerol. The aroma retention during film drying was directly related to the water content. The drying temperature had opposite influences according to the composition of the solvent and additives. Increa…
Determination of 60 Migrant Substances in Plastic Food Contact Materials by Vortex-Assisted Liquid-Liquid Extraction and GC-Q-Orbitrap HRMS
2021
A GC-HRMS analytical method for the determination of 60 migrant substances, including aldehydes, ketones, phthalates and other plasticizers, phenol derivatives, acrylates, and methacrylates, in plastic food contact materials (FCM) has been developed and validated. The proposed method includes migration tests, according to Commission Regulation (EU) 10/2011, using four food simulants (A, B, C, and D1), followed by vortex-assisted liquid–liquid extraction (VA-LLE) and GC-Q-Orbitrap HRMS analysis in selected ion monitoring (SIM) mode, with a resolving power of 30,000 FWHM and a mass accuracy ≤5 ppm. The method was validated, showing satisfactory linearity (R2 ≥ 0.98 from 40 to 400 …