Search results for "plastics"
showing 10 items of 2724 documents
Titanium-aluminium catalysts with alkoxy ligands supported on aluminium oxide for ethylene polymerization
1989
Activity of a model titanium-aluminium catalyst system with n-BuO-ligands has been investigated in the polymerization of ethylene. The effect of the concentration of titanium compound on the support, the Al/Ti molar ratio, and catalyst concentration in the polymerization process on polyethylene yield has been determined. A mathematical optimation method has been used for the interpretation of results. The intervals of the optimum parameters of catalyst synthesis have been established, to obtain catalyst with a high activity in low-pressure ethylene polymerization. These specified optimum parameters have been applied in the subsequent synthesis of similar catalytic systems, differing in the …
Processing – morphology – property relationships of polyamide 6/polyethylene blend–clay nanocomposites
2013
In this work, we studied the effect of the method of preparation and of reprocessing on the morphology and, con- sequently, on the physical properties of polyamide 6 (PA6)/ high density polyethylene (HDPE)-clay nanocomposite blends in the presence of different compatibilizers. In particular, the nanocomposites were obtained by melt mixing using a co- rotating twin screw extruder (E1). The blends thus obtained were re-extruded (E2) under the same operating conditions. Moreover, blends with the same final composition were produced using a masterbatch of the compatibilizer with the clay prepared in a separated stage in a batch mixer (MB). All the materials were characterized by scanning electr…
Structure-properties relationships of polyhedral oligomeric silsesquioxane (POSS) filled PS nanocomposites
2012
The polyhedral oligomeric silsesquioxane (POSS) additivated polystyrene (PS) based nanocomposites were pre- pared by melt processing and the structure-properties relationships of the POSS-PS systems were compared to those of the neat PS. In order to investigate the effect of these structural parameters on the final properties of the polymer nanocompos- ites, five different kinds of POSS samples were used, in particular, POSS with different inorganic cage and with different organic pendent groups. The rheological investigation suggests clearly that the POSS acts as a plasticizer and that the processability of the PS was positively modified. The affinity between the POSS samples and the PS ma…
Thermal stability and flammability of polyolefin/halloysite nanotubes composites
2015
Najnowsze badania w zakresie uniepalniania poliolefin są ukierunkowane na zastosowanie dodatku nanorurek haloizytowych (HNT) jako bezhalogenowego środka zmniejszającego palność, a jednocześnie zachowującego właściwości mechaniczne osnowy. Powstająca na powierzchni płonącego nanokompozytu, zawierającego HNT, warstwa tzw. zgorzeliny ogranicza przenikanie gazów oraz ciepła i zabezpiecza materiał przed dalszym paleniem. Unikatowa struktura HNT umożliwia dodatkowo pochłanianie produktów termicznego rozkładu poliolefinowej osnowy. Na podstawie dostępnej literatury dokonano oceny wpływu różnych czynników, m.in. modyfikacji nanorurek haloizytowych i/lub dodatku kompatybilizatora i/lub doboru odpowi…
Transient response in nonlinear region of molten polymers subjected to a sudden imposition of constant shear stress or constant electric field
1980
Experimental transient results in the nonlinear region are reported for a commercial polyisobutylene subjected to sudden imposition of either a constant shear stress or a constant electric field. Some steady-state results, eventually obtained in different types of experiments, are also considered. In both cases, a model analysis is presented that accounts for the nonlinear effects through changes in the free volume depending upon the applied stress. The good comparison between theoretical predictions and experimental results seems to indicate that the phenomenological approach advanced here is very promising.
Self assembled hydrophobic nanoclusters of poly(methyl methacrylate) embedded into polyvinyl alcohol based hydrophilic matrix: Preparation and water …
2009
Hydrophilic matrices containing nanosized clusters of hydrophilic moieties have demonstrated potential applications in biomedical field. A novel hydrogel containing nanosized domains (20–35 nm) of hydrophobic moieties of poly(methyl methacrylate) (PMMA) was prepared by grafting crosslinked poly(acrylic acid-co-methyl methacrylate) chains onto polyvinyl alcohol (PVA) backbone using an efficient redox system. The graft copolymerization process was investigated to observe the influence of gel components on the kinetic parameters of grafting such as rate of grafting (Rg), grafting yield (Gy) and grafting efficiency (Ge). The prepared graft nanohydrogel was evaluated for its water sorption poten…
Influence of the molecular structure on the melt strength and extensibility of polyethylenes
1985
Melt strength (MS) and breaking stretching ratio (BSR) data relative to polyethylenes with different molecular structure (high density (HDPE), low density (LDPE), and linear low density (LLDPE)) are shown. HDPE and LLDPE samples show high breaking stretching ratio and low melt strength values. The LDPE samples exhibit very large melt strength values but low breaking stretching ratio values. For the last mentioned samples, differences are shown in the non-isothermal elongational behavior between samples polymerized with tubular and vessel technology. For all the samples, MS decreases with increasing melt index while BSR increases with melt index.
Stress-Strain State in the Zone of Load Transfer in a Composite Specimen under Uniaxial Tension
2004
The stress-strain state in the zone of load transfer in a uniaxially stretched specimen made of a unidirectional epoxy carbon-fiber-reinforced plastic (CFRP) is investigated. A parametric analysis of the influence of geometric and mechanical characteristics of the specimen on its stress-strain state is performed by means of finite-element modeling. The parameters allowing us to significantly reduce the dangerous concentration of transverse and tangential stresses are revealed. The mechanical tensile characteristics of a high-strength pultruded unidirectional CFRP are determined experimentally, and the size effect of its strength is estimated.
Static and dynamic elasticity of some thermotropic liquid-crystalline copolyesters
1997
Two series of thermotropic liquid crystalline copolyesters were studied in static and dynamic tensile deformation. Static loading generally does not lead to any peculiar phenomena: the stress-strain diagrams are linear or convex, except one copolyester fibre, the stress-strain diagram of which is concave at high temperatures. On the contrary, in dynamic loading the elasticity modulus increased during deformation for all the samples investigated. So it can be assumed that formation of a more rigid and stable structure takes place due to the dynamic deformation.
Accceleration of Fatigue Tests of Polymer Composite Materials by Using High-Frequency Loadings
2004
The possibility of using high-frequency loading in fatigue tests of polymer composite materials is discussed. A review of studies on the use of high-frequency loading of organic-, carbon-, and glass-fiber-reinforced plastics is presented. The results obtained are compared with those found in conventional low-frequency loadings. A rig for fatigue tests of rigid materials at loading frequencies to 500 Hz is described, and results for an LM-L1 unidirectional glass-fiber plastic in loadings with frequencies of 17 and 400 Hz are given. These results confirm that it is possible to accelerate the fatigue testing of polymer composite materials by considerably increasing the loading frequency. The n…