Search results for "plastics"

Evolution of the morphology and characterzation of compatibilized PBT/EVA blends prepared by reactive extrusion

2006

In this work, the possibility of preparing compatibilized blends of poly(butylene terephthalate) (PBT) and an ethylene vinyl acetate (EVA) copolymer by reactive extrusion in the presence of an ethylene acrylic acid copolymer (EAA) and a bisoxazoline compound (PBO) as compatibilization promoters has been studied. In addition, the evolution of the morphology of the blends under different annealing conditions in the presence and absence of the compatibilizing promoters has been studied. Binary blends of PBT and EVA showed behavior typical of incompatible blends with a gross morphology and bad mechanical performance. The situation was however different for ternary PBT/EVA/EAA and especially for…

Hydrophilic membranes based on poly(vinyl methyl ether-crosslinked-polystyrene) semi-interpenetrating networks

1991

Microporous membranes were prepared from poly(vinyl methyl ether - crosslinked-polystyrene) (PVME-cross-PS) semi-IPN's by extraction of poly(vinyl methyl ether) (PVME) with water. Membrane morphology and properties are fixed during the process of swelling, phase separation, PVME extraction and vitrification which occurs upon immersing the samples in water. The membranes are characterized by swelling (water uptake), the relative amounts of free and bound water, and their permselectivity towards KCI solution.

Effect of the additive level and of the processing temperature on the re-building of post consumer pipes from polyethylene blends

2007

Abstract One of the main shortcomings of the mechanical recycling is that the properties of the secondary materials are generally sensibly inferior with respect to the virgin ones. This feature implies, for sure, that they cannot be used for the same technological application but also other uses of the secondary material are impossible. The aim of this work is to study the re-building of recycled post-consumer pipes, made of a blend of different polyethylenes, by re-processing in the presence of a nitroxyl compound as radical generator. The processing temperature and the additive concentration have been varied in order to study the effect of these parameters on the final properties. The mec…

Physical properties of virgin-recycled ABS blends: Effect of post-consumer content and of reprocessing cycles

2012

Abstract Virgin/post-consumer ABS (pc-ABS) blends were re-processed and re-formed up to three times. The effect of pc-ABS content and of reprocessing cycles on the physical properties of the prepared blends was evaluated by mechanical tests (tensile, flexural and impact tests) and by rheological and thermo-mechanical measurements. The processability of pc-ABS blends was not substantially different by that of virgin ABS up to two recycling steps even if the third one induced a slightly decrease of viscosity, more remarkable on increasing the pc-ABS content. The mechanical and thermo-mechanical properties of the samples worsened on increasing the level of pc-ABS and after each reprocessing op…

Amphiphilic Graft Copolymers and Hyperbranched Polymers Based on (3-Vinylphenyl)azomethyl-malonodinitrile

2001

A convenient approach to amphiphilic hyperbranched polymers with thioether shell for the preparation and stabilization of coinage metal (Cu, Ag, Au) …

2014

Ethylene polymerization using vanadium catalyst supported on silica modified by pyridinium ionic liquid

2016

Amphiphilic Poly(organosiloxane) Nanospheres as Nanoreactors for the Synthesis of Topologically Trapped Gold, Silver, and Palladium Colloids

2003

Amphiphilic poly(organosiloxane) nanospheres with different core−shell architectures are employed as passive nanoreactors for the synthesis of noble metal colloids. The amphiphilic poly(organosiloxane) nanospheres, which have diameters between 15 and 40 nm, possess a hydrophilic interior and a hydrophobic shell. Dispersed in organic solvents such as toluene, it has been achieved to transfer hydrophilic noble metal salts through the solvent into the nanospheres by either liquid−liquid or solid−liquid phase transfer. Subsequently, reduction of the noble metal salt with lithium triethylborohydride led to the formation of 2−5 nm sized noble metal colloids. If the network density of the shell of…

Using Janus Nanoparticles To Trap Polymer Blend Morphologies during Solvent-Evaporation-Induced Demixing

2015

Using ternary blends of polystyrene (PS), poly(methyl methacrylate) (PMMA), and Janus particles (JPs) with symmetric PS and PMMA hemispheres, we demonstrate the stabilization of dispersed and bicontinuous phase-separated morphologies by the interfacial adsorption of Janus particles during demixing upon solvent removal. The resulting blend morphology could be varied by changing the blend composition and JP loading. Increasing particle loading decreased the size of phase-separated domains, while altering the mixing ratio of the PS/PMMA homopolymers produced morphologies ranging from PMMA droplets in a PS matrix to PS droplets in a PMMA matrix. Notably, bicontinuous morphologies were obtained …

Tetrahydrofuran: More than a “Randomizer” in the Living Anionic Copolymerization of Styrene and Isoprene: Kinetics, Microstructures, Morphologies, an…

2020

The statistical anionic copolymerization of isoprene (I) and styrene (S) is commonly used to synthesize tapered block copolymers, enabling control of the phase behavior by adjusting the order–disor...