Search results for "polyamide"
showing 10 items of 103 documents
Influence of oxidation level of graphene oxide on the mechanical performance and photo-oxidation resistance of a polyamide 6
2019
The aim of this work is to study the relationship between the chemical-physical properties of graphene oxide (GO) and the performance of a polyamide 6 (PA6) in terms of mechanical reinforcement and resistance to UV-exposure. For this purpose, two samples of GO possessing different oxidation degrees were added (0.75 wt.%) to PA6 by way of a two-step technique and the materials achieved were carefully analysed from a morphological, chemical-physical, mechanical point of view. Photo-oxidation tests were carried out to assess the performance of this class of nanohybrids after 240 h of UV-exposure. The results reveal that both nanocomposites exhibit enhanced mechanical performance and durability…
Chemical Modification of Nitrile to Oxazoline Functionality on a Styrene-Acrylonitrile Copolymer in the Melt
1998
Oxazoline is a very interesting functionality for reactive extrusion and other applications. In this paper, we report the possibility of chemically transforming nitrile group attached to a copolymer of styrene and acrylonitrile (SAN) to oxazoline group using 2-amino-ethanol (AE). The chemical modification of SAN with AE was done in the molten state. Among various catalysts tested, zinc acetate turned out to be the most efficient. The effects of the catalyst concentration, temperature and mixing on the overall kinetics were studied. The formation of the expected oxazoline functionality was confirmed by infrared spectroscopy and by reacting with 1-naphthylacetic acid. The reaction between the…
Preparation of Highly Porous Carbonous Electrodes by Selective Laser Sintering
2019
Selective laser sintering (SLS) 3D printing was utilized to fabricate highly porous carbonous electrodes. The electrodes were prepared by using a mixture of fine graphite powder and either polyamide-12, polystyrene, or polyurethane polymer powder as SLS printing material. During the printing process the graphite powder was dispersed uniformly on the supporting polymer matrix. Graphite’s concentration in the mixture was varied between 5 and 40 wt % to find the correlation between the carbon content and conductivity. The graphite concentration, polymer matrix, and printing conditions all had an impact on the final conductivity. Due to the SLS printing technique, all the 3D printed electrodes …
Compatibilization of Polypropylene/Polyamide 6 Blend Fibers Using Photo-Oxidized Polypropylene.
2018
The use of polyamide/polyolefin blends has gained importance and concern for years, but they also show some issues to be adequately addressed, such as the incompatibility between the two components. This is usually overcome by using suitable compatibilizers, typically based on functionalized polyolefins. However, there is only little information about the use of a degraded polyolefins to induce compatibilization. This is even truer, as far as polyamide 6/polypropylene (PA6/PP) blends are concerned. In this work, compatibilization of PA6/PP blends by using small amounts of photo-oxidized PP was investigated
Molecular Dynamic Simulation on Polyamide6/Graphene nano-layers nanocomposites
2016
In this work results obtained from Molecular Dynamic Simulation (MDS) on Polyamide 6 (PA6) chains in graphene containing nanocomposites are presented. Through detailed MDS, the interface of complex nanocomposites systems can be fully characterized, furthermore different physical properties, such as density, end-to-end distance , and average radius of gyration of polymers chains can be predicted. This issue is useful for the design of highly value-added nanocomposites and the optimization of their production process, by defining transformation steps and status variables (temperature, time and pressure), that can also help the industrial production.
Phenomenological approach to compare the crystallization kinetics of isotactic polypropylene and polyamide-6 under pressure
2001
Reliable experimental data for semicrystalline polymers crystallized under pressure are supplied on the basis of a model experiment in which drastic solidification conditions are applied. The influence of the pressure and cooling rate on some properties, such as the density and microhardness, and on the product morphology, as investigated with wide-angle X-ray scattering (WAXS), is stressed. Results for isotactic polypropylene (iPP) samples display a lower density and a lower microhardness with increasing pressure over a wide range of cooling rates (from 0.01 to 20 °C/s). Polyamide-6 (PA6) samples exhibit the opposite behavior, with the density and microhardness increasing at higher pressur…
Performances and morphology of polyamide/carbonaceous structures based fibers
2014
In this work the influence of carbonaceous particles with different particle sizes and shapes on the morphology and mechanical performances of polyamide (PA) based fibers was investigated. Graphene nanoplatelets (GNP) are compared with spherical and rod-like carbon fillers such as carbon black (CB) and multiwall carbon nanotubes (MWCNT). The different morphologies of the particles control their dispersion and their alignment in PA fibers upon elongational flow action and play a key role in structure-property relationships.
Morphology and mechanical properties of extruded ribbons of LDPE/PA6 blends compatibilized with an ethylene-acrylic acid copolymer
2003
Two grades of low density polyethylene (LDPE) were blended with polyamide-6 (PA) in the 75/25 and 25/75 wt/wt ratios and shaped into ribbons with a Brabender single screw extruder. An ethylene-acrylic acid copolymer (EAA) was used in the 2 phr concentration as a compatibilizer precursor (CP). The morphology of the ribbons and its evolution during high temperature annealing were investigated by scanning electron microscopy (SEM). The results confirmed that EAA does actually behave as a reactive compatibilizer for the LDPE/PA blends. In fact, in the presence of EAA, the interfacial adhesion is improved, the dispersion of the minor phase particles is enhanced and their tendency toward fibrilla…
Effect of the nanotube aspect ratio and surface functionalization on the morphology and properties of multiwalled carbon nanotube polyamide-based fib…
2013
In this study, the effect of the carbon nanotube (CNT) aspect ratio and surface functionalization on the mechanical behavior and morphological changes of polyamide (PA)-based fibers was investigated. Composites were prepared by the melt blending of CNTs with PA, and at a later time, the fibers were prepared by melt spinning and cold drawing. A reinforcement effect was noticed for all of the CNTs samples, and the increase in the mechanical properties and dimensional stability was more pronounced for highly oriented filaments. When the elongational flow was increased, the orientation of CNTs along the fiber direction was observed, but the nanotube alignment was much more difficult for CNTs wi…