Search results for "polymer blend"
showing 10 items of 219 documents
On the Role of Drop Break Up for Coalescence Processes and Morphology Development in Polymer Blends under Shear
2005
Drop sizes and drop-size distributions were determined as a function of time at constant shear rates, γ, by means of an optical shear cell in combination with an optical light microscope after preshearing the samples at high γ. The systems under investigation were PIB 3/PDMS 152 (PIB: polyisobutylene, PDMS: poly(dimethylsiloxane), numbers: average molar masses in kg/mol) and COP 26*/PDMS 48 (COP: poly(dimethyl-co-methylphenylsiloxane), asterisk: apparent molar mass); all measurements refer to 25 °C. Systems and conditions were chosen such that shear rates in the vicinity of the intersection of the coalescence and the break up curves become experimentally accessible. Under these conditi…
Relation of Interdiffusion and Self-Diffusion in Polymer Mixtures
1986
From different assumptions one obtains linear relationships either between the interdiffusion coefficient and the self-diffusion coefficients or between the inverse interdiffusion coefficient and the inverse self-diffusion coefficients. The nature of these assumptions and possible experiments for discriminating between them are discussed.
Making Floryr–Huggins Practical: Thermodynamics of Polymer-Containing Mixtures
2010
The theoretical part of this article demonstrates how the original Flory–Huggins theory can be extended to describe the thermodynamic behavior of polymer-containing mixtures quantitatively. This progress is achieved by accounting for two features of macromolecules that the original approach ignores: the effects of chain connectivity in the case of dilute solutions, and the ability of polymer coils to change their spatial extension in response to alterations in their molecular environment. In the general case, this approach leads to composition-dependent interaction parameters, which can for most binary systems be described by means of two physically meaningful parameters; systems involving …
Solubility of Polymers
2011
Detailed knowledge concerning the phase state (homogeneous or coexistence of two or more condensed phases) of polymer containing mixtures is indispensible in virtually any area related to the production or application of macromolecules. In addition to this qualitative information it is for many purposes highly desirable to dispose of quantitative data regarding solvent quality or, more generally, with respect to the thermodynamic interaction between the components of the mixtures. This contribution starts with a brief presentation of the thermodynamic criteria deciding on the phase state and presents the experimental methods used in this area. The next section gives an overview on typical b…
Analysis of the crystallization behaviour of PBT-rich PBT/PET blends under processing conditions
2007
Among the high‐performance polyesters blends PBT/PET blends are expected to exhibit remarkable properties as far as the crystallization behaviour is concerned. The solidification behaviour of a 60/40 w/w PBT/PET blend was studied in a wide range of cooling conditions, according to a Continuous Cooling Transformation (CCT) procedure developed by the authors, aiming to emulate the typical conditions encountered in polymer processing. A set of several samples characterized by an homogeneous structure was prepared by solidification from the melt through spray cooling, and the resulting structure and properties were evaluated by density, Micro Hardness (MH), Wide Angle X‐ray Diffraction (WAXD) m…
The role of crystalline, mobile amorphous and rigid amorphous fractions in the performance of recycled poly (ethylene terephthalate) (PET)
2012
[EN] The action of thermo-mechanical degradation induced by mechanical recycling of poly(ethylene terephthalate) was simulated by successive injection moulding cycles. Degradation reactions provoked chain scissions and a reduction in molar mass mainly driven by the reduction of diethyleneglycol to ethylene glycol units in the flexible domain of the PET backbone, and the formation of -OH terminated species with shorter chain length. The consequent microstructural changes were quantified taking into account a three-fraction model involving crystalline, mobile amorphous (MAF) and rigid amorphous fractions (RAF). A remarkable increase of RAF, to a detriment of MAF was observed, while the percen…
Recycling of a starch-based biodegradable polymer
2002
A new starch-based polymeric system, ZI1OU from Novamont, mainly composed of starch and polycaprolactone, was reprocessed several times in an extruder to investigate the recyclability of this biodegradable polymer. A previous investigation of the thermomechanical degradation in a mixer has been also done. The degradation is mostly due to the thermal stress but the presence of the mechanical stress strongly increases the degradation kinetic. During melt processing two concurrent processes take place: the first is the degradation, i.e. the breaking and shortening of polymeric chains, mostly occurring in the PCL phase; the second is the formation of some crosslinked structure in the starch pha…
Processing and mechanical properties of organic filer-polypropylene composites
2005
The addition of organic fillers into thermoplastic polymers is an interesting issue, which has had growing consideration and experimentation during the last years. It can give rise to several advantages. First, the cost of these fillers is usually very low. Also, the organic fillers are biodegradable (thus contributing to an improved environmental impact), and finally, some mechanical and thermomechanical properties can be enhanced. In this study, the effect of the addition of different organic fillers on the mechanical properties and processability of an extrusion-grade polypropylene were investigated. The organic fillers came from natural sources (wood, kenaf, and sago) and were compared …
Using organoclay to promote morphology refinement and co-continuity in high-density polyethylene/polyamide 6 blends – Effect of filler content and po…
2010
We investigate the gradual changes of the microstructure of two blends of high-density polyethylene (HOPE) and polyamide 6 (PA6) at opposite composition filled with increasing amounts of an organo-modified clay. The filler locates preferentially inside the polyamide phase, bringing about radical alterations in the micron-scale arrangement of the polymer phases. When the host polyamide represents the major constituent, a sudden reduction of the average sizes of the polyethylene droplets was observed upon addition of even low amounts of organoclay. A morphology refinement was also noticed at low filler contents when the particles distributes inside the minor phase. In this case, however, keep…
Heat-Resistant Fully Bio-Based Nanocomposite Blends Based on Poly(lactic acid)
2013
Poly(lactic acid) (PLA) is melt mixed with polyamide 11 (PA11) to obtain a heat-resistant fully bio-based blend with PLA as the dominant component. The goal is achieved by adding small amounts of organoclay (OMMT), which is used to manipulate the blend microstructure. The selective positioning of the OMMT inside the PA11 and at the PLA/PA11 interface turns the blend morphology from drop/matrix into co-continuous at high PLA content (70 wt%). The OMMT-rich PA11 framework that interpenetrates the major PLA phase effectively contributes to bear stresses, and the nanocomposite blend keeps its structural integrity up to ≈160 °C, i.e., about 100 °C above the PLA glass transition.