Search results for "polymer nanocomposite"
showing 10 items of 55 documents
Modeling and stress-strain characteristics of the mechanical properties of carbon-nanotube-reinforced poly(vinyl acetate) nanocomposites
2011
Polymer/carbon nanotube (CNT) composites are one of the most perspective advanced materials developed in recent years. The properties of CNT-reinforced polymer composites, however, strongly depend on structural aspects of the nanostructured filler and on its dispersion quality in a polymer matrix. Consequently, this research was devoted to the investigation of multiwalled-CNT-modified poly(vinyl acetate) (PVAc) composites with respect to the mechanical property dependence on some structural characteristics of CNTs. PVAc/CNT nanocomposites were obtained with a solution casting technique. The amount of CNTs was changed from 0.01 up to 2 wt %. The stress–strain characteristics of PVAc/CNT nano…
Limits of the linear viscoelastic behaviour of polyamide 66 filled with TiO2 nanoparticles: Effect of strain rate, temperature, and moisture
2008
Abstract Limits of linear viscoelastic behaviour of TiO 2 nanoparticle-filled polyamides are estimated quantitatively by the results of uniaxial tension tests. The stress limit of the filled polymer is higher than that of the un-filled one. Their values are the lower, the higher the temperature and moisture content of test specimens, and the lower, the lower the strain rate. The concept of an energy threshold for the linear viscoelastic behaviour is used to comprehensively characterize the limits over a wide range of test conditions. The energy limit is not affected by the strain rate, temperature, or moisture, and its value for the filled polymer is higher than that for the un-filled one. …
Prediction of the morphology of polymer-clay nanocomposites
2015
Abstract Polymer nanocomposites have continually attracted increasing interest over the last decade, due to significant improvements they can offer compared to neat polymer matrices. However, the final morphology of a nanocomposite, determined by several variables, can significantly influence the macroscopic properties of the final product. Therefore, it is important to study the interactions between processing, morphology, structure and rheological properties, and the suitability of existing models in order to predict the system's behaviour with change of the main processing variables. In this work, the applicability of a predictive theory based on the Wu model was formulated and proposed …
The role of organoclay in promoting co-continuous morphology in high-density poly(ethylene)/poly(amide) 6 blends
2008
The effect of organically modified clay on the morphology, rheology and mechanical properties of high-density polyethylene (HDPE) and polyamide 6 (PA6) blends (HDPE/PA6 ¼ 75/25 parts) is studied. Virgin and filled blends were prepared by melt compounding the constituents using a twin-screw extruder. The influence of the organoclay on the morphology of the hybrid was deeply investigated by means of wide-angle X-ray diffractometry, transmission and scanning electron microscopies and quantitative extraction experiments. It has been found that the organoclay exclusively places inside the more hydrophilic polyamide phase during the melt compounding. The extrusion process promotes the formation o…
Bio-inspired Resorbable Calcium Phosphate-Polymer Nanocomposites for Bone Healing Devices with Controlled Drug Release
2011
In orthopedic research, increasing attention is being paid to bioresorbable composite materials as an attractive alternative to permanent metal bone healing devices. Typical composites consist of a biodegradable polyester matrix loaded with bioactive calcium phosphate ceramic particles (tricalcium phosphate, TCP or hydroxyapatite, HA) added to improve the biological response and mechanical properties of the neat polymer. The mechanical behavior of such particle-reinforced composites, however, falls far short of the expected performance in high-load bearing situations. Replicating some features of nacre—a strong and tough natural nanocomposite with a very high content of brittle inorganic ph…
Thermomechanical degradation of polyethylene/polyamide 6 blend-clay nanocomposites
2014
Abstract Polymer nanocomposites are gaining a growing interest both in the academia and in the industrial field, because of some specific properties they can assure. However, the rise in the attention from the industry is also leading to concerns about their processing, which can involve issues which are not present in traditional polymers processing; furthermore, additional issues can arise when nanocomposites are based on a polymer blend rather than a single polymer. In this work, a systematic study on thermomechanical degradation and reprocessing behaviour of LDPE/PA6/Cloisite 15A systems has been performed. The characterization was based on rheological, mechanical and morphological anal…
Metal-polymer nanocomposite resist: a step towards in-situ nanopatterns metallization
2013
In this work we propose an alternative method for the fabrication of metal micro/nanostructures from metal-polymer nanocomposite resists and their subsequent electroless metallization. The process consists of three simple steps: 1. Fabrication of micro or nanopatterns by lithography or any other direct printing technologies (inkjet or microplotter printing...), 2. In-situ synthesis of metal nanoparticle during a post-bake step and 3. Non-electrochemical metallization of nanocomposite patterns. The novelty of our approach is that both Ag and Au nanoparticles are embedded into the polymer pattern and act as seeds for the reduction of Ag(I) when immersed into a solution of the corresponding pr…
Grafting of polymer chains on the surface of carbon nanotubes via nitroxide radical coupling reaction
2015
Poly(butylene succinate) (PBS) was grafted on the surface of TEMPO (2,2,6,6-tetramethyl-1-piperidinyloxy) modified multi-walled carbon nanotubes (MWCNTs) via a nitroxide radical coupling reaction. TEMPO functionalized MWCNTs (MWCNTs-g-TEMPO) were synthesized using the Cu(I)-catalyzed azide/alkyne click chemistry approach and the covalent bond of the nitroxide moieties onto the MWCNTs was confirmed via electron paramagnetic resonance (EPR) spectroscopy. The PBS grafting on the sidewalls of MWCNTs was carried out in solution via peroxide-induced formation of macroradicals and it was confirmed by EPR and attenuated total reflectance Fourier transform infrared analysis. Preliminary rheological …
Large-area dielectric breakdown performance of polymer films
2015
In this study, large-area dielectric breakdown performances of various bi-axially oriented polypropylene (BOPP)-silica nanocomposite films are studied by utilizing the self-healing multi-breakdown method presented in the Part I of this publication. In particular, the effects of silica filler content, pre-mixing method, co-stabilizer content and film processing on the large-area breakdown performance are analyzed. Nanostructural and film cross-sectional analyses are correlated to the breakdown responses. The optimum silica filler content is found to reside at the low fill fraction level (~1 wt-%) and automatic pre-mixing of the raw materials and the optimization of the orientation temperatur…
Ecofriendly Biopolymer-Based Nanocomposite Films with Improved Photo-Oxidative Resistance
2022
The interest towards high performance biopolymer-based materials increases continuously and, to guarantee appropriately industrial applications, the photo-oxidative resistance and stability of these materials must be adequately addressed. In this study, innovative biopolymer-based nanocomposites, i.e., Polyamide 11 (PA11), containing ad-hoc modified Layered Double Hydroxides (LDH), were successfully formulated and characterized. Particularly, LDH were considered carriers for hindered amine light stabilizing molecules, so two different hindered amine moieties (HALS1 and HALS2) were anchored on LDH layered internal structures and/or outer surfaces. The presence of HALS1 and HALS2 in LDH were …