Search results for "polymers"

Solidification of syndiotactic polystyrene by a continuous cooling transformation approach

2007

Syndiotactic polystyrene (sPS) was solidified from the melt under drastic conditions according to a continuous cooling transformation methodology developed by the authors, which covered a cooling rate range spanning from approximately 0.03 to 3000 °C/s. The samples produced, structurally homogeneous across both their thickness and surface, were analyzed by macroscopic methods, such as density, wide-angle X-ray diffraction (WAXD), and microhardness (MH) measurements. The density was strictly related to the phase content, as confirmed by WAXD deconvolution. The peculiar behavior encountered (the density first decreasing and then increasing with the cooling rate) was attributed to the singular…

An experimental methodology to study polymer crystallization under processing conditions. The influence of high cooling rates

2002

Abstract A new experimental route for investigating polymer crystallization under very high cooling rates (up to 2000°C/s) is described. A complete and exhaustive description of the apparatus employed for preparing thin quenched samples (100– 200 μm thick) is reported, the cooling mechanism and the temperature distribution across sample thickness is also analysed, showing that the final structure is determined only by the thermal history imposed by the fast quench apparatus. Details concerning the characterization techniques used to probe the final structure are reported, including density measurements and wide angle X-ray diffraction patterns. Experimental results concerning isotactic poly…

In situ synchrotron characterization of mechanically activated self-propagating high-temperature synthesis applied in Mo–Si system

1999

Abstract An original experiment was designed to monitor structural and thermal evolutions during the MASHS (Mechanically Activated Self-propagating High-temperature Synthesis) process in the Mo–Si system. Time-Resolved X-Ray Diffraction (TRXRD) coupled with an infrared imaging technique was performed to study, in situ, the formation of the α-MoSi2 phase in the combustion front. Despite a temporal resolution of 50 ms between two consecutive diffractograms, no intermediate phase was observed during the passage of the combustion front. The only reaction responsible for the self-sustentation is Mo+2Si→MoSi2 in the primary zone inside the combustion wave. The mechanical activation was found to i…

An electron diffraction study of deposited docosanoic acid monolayers

1991

Docosanoic acid monolayers deposited on thin polymer films under different water surface conditions have been investigated using transmission electron diffraction at normal and tilted incidence. Diffraction patterns obtained from the L2 and L2' phase are quite similar, but distinctly different to samples coated from the CS phase. The former were consistent with molecules perpendicular to the substrate, arranged in a texture of grains with unusual orthorhombic packing. There is evidence for a phase transition from a liquid crystalline phase on the water surface.

The continuous cooling transformation (CCT) as a flexible tool to investigate polymer crystallization under processing conditions

2009

An experimental route for investigating polymer crystallization over a wide range of cooling rates (from 0.01 to 1000◦C/s) and pressures (from 0.1 to 40 MPa) is illustrated, using a method that recalls the approach adopted in metallurgy for studying structure development in metals. Two types of experimental setup were used, namely an apparatus for fast cooling of thin films (100–200 μm thick) at various cooling rates under atmospheric pressure and a device (based on a on-purpose modified injection molding machine) for quenching massive samples (about 1–2 cm3) under hydrostatic pressure fields. In both cases, ex situ characterization experiments were carried out to probe the resulting struct…

X-ray scattering studies of fatty acid films on water and on Cdcl2 solutions

1991

X-ray diffraction methods for Langmuir films on the surface of water are briefly presented, together with recent results for docosanoic acid monolayers on pure water and for eicosanoic acid monolayers on an ionic subphase.

Isotactic polypropylene solidification under pressure and high cooling rates. A master curve approach

2000

Solidification in industrial processes very often involves flow fields, high thermal gradients and high pressures: the development of a model able to describe the polymer behavior becomes complex. Recently a new equipment has been developed and improved to study the crystallization of polymers when quenched under pressure. An experimental apparatus based on a modified, special injection moulding machine has been employed. Polymer samples can be cooled at a known cooling rate up to 100 °C/s and under a constant pressure up to 40 MPa. Density, Micro Hardness (MH), Wide angle X-ray diffraction (WAXD), and annealing measurements were then used to characterize the obtained sample morphology. Res…

Aqueous Processed Biopolymer Interfaces for Single-Cell Microarrays

2020

Single-cell microarrays are emerging tools to unravel intrinsic diversity within complex cell populations, opening up new approaches for the in-depth understanding of highly relevant diseases. However, most of the current methods for their fabrication are based on cumbersome patterning approaches, employing organic solvents and/or expensive materials. Here, we demonstrate an unprecedented green-chemistry strategy to produce single-cell capture biochips onto glass surfaces by all-aqueous inkjet printing. At first, a chitosan film is easily inkjet printed and immobilized onto hydroxyl-rich glass surfaces by electrostatic immobilization. In turn, poly(ethylene glycol) diglycidyl ether is graft…

2020

Epoxy resin plays a key role in composite matrices and DGEBA is the major precursor used. With the aim of favouring the use of bio resources, epoxy resins can be prepared from lignin. In particular, diglycidyl ether of isoeugenol derivatives are good candidates for the replacement of DGEBA. This article presents an effective and eco-friendly way to prepare epoxy resin derived from isoeugenol (BioIgenox), making its upscale possible. BioIgenox has been totally characterized by NMR, FTIR, MS and elemental analyses. Curing of BioIgenox and camphoric anhydride with varying epoxide function/anhydride molar ratios has allowed determining an optimum ratio near 1/0.9 based on DMA and DSC analyses a…

Copolymerization of VDF and HFP in Supercritical Carbon Dioxide: A Robust Approach for Modeling Precipitation and Dispersion Kinetics

2012

A kinetic model is developed for the heterogeneous free-radical copolymerization of vinylidene fluoride and hexafluoropropylene in supercritical CO 2. The model accounts for polymerization in both the dispersed (polymer-rich) phase and in the continuous (polymer-free) supercritical phase, for radical interphase transport, diffusion limitations, and chain-length-dependent termination in the polymer-rich phase. A parameter evaluation strategy is developed and detailed to estimate most of the kinetic parameters a priori while minimizing their evaluation by direct fitting. The resulting model predictions compare favorably with the experimental results of conversion and MWD at varying monomer fe…