Search results for "polymers"
showing 10 items of 3567 documents
Magnesium(II) polyporphine: The first electron-conducting polymer with directly linked unsubstituted porphyrin units obtained by electrooxidation at …
2010
Abstract Electrooxidation of magnesium(II) porphine, a totally unsubstituted porphyrin, in acetonitrile solution under potentiostatic or potentiodynamic regime leads to a polymer film at the electrode surface. Polymer deposition takes place at extremely low potential, several hundred mV less positive even compared to the deposition potential for pyrrole or EDOT (at identical monomer concentrations) in the same solvent. Film thickness can be controlled by the passed deposition charge. This material and its THF-soluble fraction have been characterized by various electrochemical methods as well as by UV–visible and IR spectroscopies, XPS, XRD and MALDI-TOF techniques. This analysis has allowed…
Electrosynthesis and properties of poly(3,4-ethylenedioxythiophene) films functionalized with titanocene dichloride complex
2006
Synthesis of a titanocene dichloride derivative functionalized with 3,4-etylenedioxythiophene group, Tc1EDOT (Cl 2TiCpC5H4(CH2) (3,4ethylenedioxythiophene)) has been described. Redox behavior of the monomer in tetrahydrofuran (THF), dichloromethane (DCM) and acetonitrile (AN) at different scan rates has been discussed in terms of different ability of these solvents to coordination with the reduced titanocene (Tc) complex and the solvation of Cl − anions. Electrooxidation of Tc1EDOT to get a conducting polymer film with immobilized titanocene dichloride centers and electrochemical properties of its polymer matrix in background acetonitrile solution have been compared with those of non-substi…
Epoxy composites filled with high surface area-carbon fillers
2013
Citation: J. Appl. Phys. 114, 164304 (2013); doi: 10.1063/1.4826529 (Received 24 July 2013; accepted 6 October 2013; published online 22 October 2013) A comprehensive analysis of electrical, electromagnetic (EM), mechanical, and thermal properties of epoxy resin composites filled with 0.25–2.0 wt. % of carbon additives characterized by high surface area, both nano-sized, like carbon nanotubes (CNTs) and carbon black (CBH), and micro-sized exfoliated graphite (EG), was performed. We found that the physical properties of both CNTs- and CBH-based epoxy resin composites increased all together with filler content and even more clearly for CBH than for CNTs. In the case of EG-based composites, go…
An Inverse Thermogelling Bioink Based on an ABA-Type Poly(2-oxazoline) Amphiphile
2021
Hydrogels are key components in several biomedical research areas such as drug delivery, tissue engineering, and biofabrication. Here, a novel ABA-type triblock copolymer comprising poly(2-methyl-2-oxazoline) as the hydrophilic A blocks and poly(2-phenethyl-2-oxazoline) as the aromatic and hydrophobic B block is introduced. Above the critical micelle concentration, the polymer self-assembles into small spherical polymer micelles with a hydrodynamic radius of approx 8-8.5 nm. Interestingly, this specific combination of hydrophilic and hydrophobic aromatic moieties leads to rapid thermoresponsive inverse gelation at polymer concentrations above a critical gelation concentration (20 wt %) into…
From the solution processing of hydrophilic molecules to polymer-phthalocyanine hybrid materials for ammonia sensing in high humidity atmospheres.
2014
We have prepared different hybrid polymer-phthalocyanine materials by solution processing, starting from two sulfonated phthalocyanines, s-CoPc and CuTsPc, and polyvinylpyrrolidone (PVP), polyethylene glycol (PEG), poly(acrylic acid-co-acrylamide) (PAA-AM), poly(diallyldimethylammonium chloride) (PDDA) and polyaniline (PANI) as polymers. We also studied the response to ammonia (NH3) of resistors prepared from these sensing materials. The solvent casted films, prepared from s-CoPc and PVP, PEG and PAA-AM, were highly insulating and very sensitive to the relative humidity (RH) variation. The incorporation of s-CoPc in PDDA by means of layer-by-layer (LBL) technique allowed to stabilize the fi…
Impact of point defects on the elastic properties of BaZrO3: Comprehensive insight from experiments and ab initio calculations
2018
Abstract Acceptor doped BaZrO3 is the prototype of proton conducting perovskites which are of strong interest as electrolytes for intermediate temperature fuel cells. Elastic properties of both dry and hydrated Y-doped BaZrO3 (1.5–17 mol% Y) were determined using ultrasound time of flight (TOF) measurements, and complemented by ab initio calculations which allow for an analysis of the different contributions. The experimental and theoretical findings are consistent and reveal a strong decrease of the Young's, shear and bulk moduli upon increasing dopant concentration. This decrease is attributed to a combined effect of (i) macroscopic lattice chemical expansion mainly caused by differing io…
Morphology, reorganization and stability of mesomorphic nanocrystals in isotactic polypropylene
2006
Abstract The morphology and thermodynamic stability of crystals of isotactic polypropylene (iPP) were analyzed as a function of the path of crystallization by atomic force microscopy (AFM) and differential scanning calorimetry (DSC). Samples were melt-crystallized at different rates of cooling using a “controlled rapid cooling technique”, and subsequently annealed at elevated temperature. Mesomorphic equi-axed domains with a size less than 20 nm were obtained by fast cooling from the melt at a rate larger about 100 K s−1. These domains stabilize on heating by growing in chain direction and cross-chain direction, to reach a maximum size of about 40–50 nm at a temperature of 433 K, with the q…
Scanning probe microscopy of pine and birch kraft pulp fibres
2000
Abstract Fibres of the conventional pine and birch kraft pulps were characterized by scanning probe microscopy (SPM). The surface characteristics of these pulps taken at the early stages of pulping were compared with those from later stages of pulping (with or without subsequent oxygen/alkali delignification). It was observed that during delignification a granular surface structure was replaced by a fibrillar surface containing various disruptions. The granular and fibrillar regions were particularly well resolved by using phase imaging in tapping mode of SPM. It was concluded that the granular structure corresponded to surface lignin since the decrease in the relative amount of the granula…
Ruthenium-Containing Block Copolymer Assemblies: Red-Light-Responsive Metallopolymers with Tunable Nanostructures for Enhanced Cellular Uptake and An…
2015
The use of self-assembled nanostructures consisting of red-light-responsive Ru(II)-containing block copolymers (BCPs) for anticancer phototherapy is demonstrated. Three Ru-containing BCPs with different molecular weights are synthesized. Each BCP contains a hydrophilic poly(ethylene glycol) block and an Ru-containing block. In the Ru-containing block, more than half of the side chains are coordinated with [Ru(2,2':6',2''-terpyridine)(2,2'-biquinoline)](2+) , resulting in more than 40 wt% Ru complex in the BCPs. The Ru complex acts as both a red-light-cleavable moiety and a photoactivated prodrug. Depending on their molecular weights, the BCPs assemble into micelles, vesicles, and large comp…
Hybrid organic-inorganic light-emitting diodes.
2011
The demonstration of colour tunability and high efficiency has brought organic light-emitting diodes (OLEDs) into the displays and lighting market. However, high production costs due to expensive deposition techniques and the use of reactive materials still limit their market entry, highlighting the need for novel concepts. This has driven the research towards the integration of both organic and inorganic materials into devices that benefit from their respective peculiar properties. The most representative example of this tendency is the application of metal oxides in organic optoelectronics. Metal oxides combine properties such as high transparency, good electrical conductivities, tuneable…