Search results for "poro"

Ultrasonic characterisation of poroux materials

2017

International audience; Acoustic models of the acoustics of porous and perforated media involve a set of physical parameters. Some of the parameters, the tortusity, the viscous and thermal characteristic lengths are defined for a perfect incompressible and inviscid fluid saturating the porous medium. It is shown that ultrasonic propagation in air-saturated materials can be used to determine these parameters. A basic method involving air-coupled ultrasonic transducers is presented. Variants of this method and a practical implementation of one of these is proposed.

254 GENERALIZED SOMATOSENSORY CHANGES IN PATIENTS WITH TEMPOROMANDIBULAR DISORDER

2007

Simultaneous application of vacuum and sweep gas in a polypropylene membrane contactor for the recovery of dissolved methane from water

2021

Abstract Vacuum and nitrogen as sweep gas were used simultaneously (combination mode) to generate the driving force in a microporous polypropylene membrane contactor for the recovery of dissolved methane from water. Experiments were carried out under different liquid flow-rates (5.0–28.0 L h−1), N2 flow-rates (0.5–1.5 L h−1) and vacuum pressures (0–480 mbar). The maximum removal efficiency of methane was >90% at moderate values of gas-to-liquid ratios (G/L) and vacuum of 0.2 and ≤ 200 mbar, respectively. Removal efficiencies obtained in combination mode were usually higher than when using vacuum or sweep gas, separately. To achieve a methane content >35% in the recovered gas, G/L values low…

Preliminary study on analysis and removal of wax from a Carrara marble statue

2015

This preliminary study has mainly focused on the wax identification by nuclear magnetic resonance (NMR) and removal. Wax is used for many purposes in the field of art as protective coatings on wooden, stone or metal objects. From the comparison of the spectra H NMR and in particular with the correspondence of the resonance peaks of the samples taken from the statue and beeswax and paraffin, we can conclude that the wax applied on the statue surface is beeswax. From our data, it can be concluded that, to remove the beeswax, from any stone support, the more effective solvent is the mixture of cyclohexane/ethyl acetate. The removal percentages ranged from 19 to 99%. Lower percentages of remova…

Long-term leisure time physical activity and properties of bone: A twin study

2009

Effects of physical activity on bone properties, when controlled for genetic effects, are not fully understood. We aimed to study the association between long-term leisure time physical activity (LTPA) and bone properties using twin pairs known to be discordant for leisure time physical activity for at least 30 yr. Volumetric BMD and geometric properties were measured at the tibia shaft and distal end using pQCT in 16 middle-aged (50-74 yr) same-sex twin pairs (seven monozygotic [MZ] and nine dizygotic [DZ] pairs) selected from a population-based cohort. Paired differences between active and inactive co-twins were studied. Active members of MZ twin pairs had larger cortical bone cross-secti…

Non-hydrolysable macromolecular constituents from outer walls of Chlorella fusca and Nanochlorum eucaryotum

1992

Abstract Many green microalgae possess a thin trilaminar outer wall (TLS) with a very high resistance to chemical degradation. TLS are known to play an important protective role in living cells. They are also selectively preserved during fossilization and thus provide a major contribution to the fossil organic matter of a number of sedimentary rocks. However, little information is available on TLS chemical structure. Examination of the TLS of Chlorella fusca (a lacustrine Chlorophycea) and of Nanochlorum eucaryotum (a recently discovered marine Chlorophycea) indicated that (i) they exhibit morphological features commonly observed in other green microalgae, (ii) their non-hydrolysable macrom…

Simultaneous determination of third-generation synthetic cannabinoids in oral fluids using cyclodextrin-silica porous sorbents

2022

Abstract A microporous material made of cyclodextrin units covalently immobilized into a silica network has found an innovative bioanalytical application in the sample clean-up and simultaneous isolation of three synthetic cannabinoids (ADB-CHMICA, MMB-CHMICA, and MDMB-CHMCZCA) from human oral fluid through solid-phase extraction. The subsequent quantitation is carried out using liquid chromatography coupled to fluorescence detection. The optimized experimental procedure gives recoveries ranging from 76% to 96% in oral fluid samples spiked with the studied cannabinoids at the µg L-1 level. High selectivity is obtained through the extraction procedure due to the presence of cyclodextrin in t…

New multicomponent catalysts for the selective aerobic oxidative condensation of benzylamine to N-benzylidenebenzylamine

2014

Aerobic oxidative condensation of benzylamine to N-benzylidenebenzylamine was carried out on new gold-based catalysts using as support bimodal UVM-7-like mesoporous silica containing Ni and Ce (or Sn) as oxide nanodomains partially embedded inside the mesoporous UVM-7 silica walls. These nanodomains acted as effective and stable inorganic anchors favoring the nucleation, growth and stability of supported gold particles. Following the atrane method (a “one-pot” strategy able to harmonize the hydrolytic reactivity of different heteroelements through the use of complexes containing triethanolamine-derived ligands (atranes) as precursors) the stability of the oxide nanodomains during oxidation …

Hydrodynamic chromatography of macromolecules on 2 μm non-porous spherical silica gel packings

1989

Non-porous spherical 2μm silica gel particles have been tested as packing for hydrodynamic chromatography of macromolecules (HDC). Columns packed with these particles in 250×4.6mm i.d. columns can be operated very efficiently (e.g. a reduced plate height of about 2) when the detection cell is miniaturized. The packing is suitable for the separation of polystyrenes of Mw of 104–107 by hydrodynamic chromatography and the retention behaviour of polystyrenes agrees well with the known theoretical models. Preliminary results on the applicability of HDC for the separation of biopolymers are presented.

Characterization and thermomechanical assessment of a SiC-sandwich material for Flow Channel Inserts in DCLL blankets

2019

Abstract Flow Channel Inserts (FCIs) are key elements in the high-temperature Dual Coolant Lead Lithium (DCLL) blanket, since they insulate electrically the flowing PbLi to avoid MHD effects and protect the steel structure from the hot liquid metal. SiC-based materials are main candidates for high-temperature FCIs, being a dense-porous SiC-based sandwich material an attractive option. The present work is focused on the development of such a SiC-based material. On the one hand, in order to assess the suitability of the concept for FCIs, the main results of a stress analysis, MHD and heat transfer simulations are summarized. On the other hand, the experimental production of the SiC-based mate…