Search results for "porous material"
showing 10 items of 361 documents
High-resolution physisorption techniques for the characterization of adsorbents and catalysts
1991
Abstract High-resolution physisorption techniques performed in the continuous volumetric mode have been developed to investigate the surface and pore structure properties of porous solids. Physisorption data on well-defined microporous solids (zeolites and aluminophosphates) provide novel information on the mechanism of micropore filling, the behavior of the adsorbed phase and the pore structure of the adsorbent. The combination of physisorption with high-resolution analytical techniques such as calorimetry and neutron diffraction further expands our knowledge and understanding of physisorption processes. The results are not only important for fundamental research but can be applied in the …
Study of Selective Adsorption of Gases by Calorimetry
2013
This chapter is devoted to the study of coadsorption of gases in nanoporous solids by using the differential calorimetry. In the first part, the thermodynamic principles of adsorption of gases are recalled. Some of them have already presented in chapter one. However a special attention has been paid here to the determination of the adsorption enthalpies and entropies and we focused on the selective adsorption of binary mixtures. Then the specific experimental technique based on the combination of differential calorimetry with manometry and gas phase chromatography or mass spectrometry is shown in details. In the last part, the thermodynamic concepts on coadsorption are illustrated with expe…
Study of the Pore Network of Dealuminated Faujasites by Water Vapor Adsorption
1991
Summary The adsorption and desorption isotherms of water vapor are drawn at 25°C for dealuminated HY zeolites upon framework Si/Al ratio. The isotherms are compared to that of the parent NaY zeolite. The isotherm changes in shape from the type I to the type IV with an hysteresis loop changing from the type H 4 to the type H 2 , as increases the Si/Al ratio. The POLANYI-DUBININ theory is used to determine the micropore volume accessible to water. It decreases with increasing Si/Al ratios, down to zero at a Si/Al ratio of 35. Such a result is accounted by the adsorption on the hydrophilic centers which are the cations (H + ) associated with the structural aluminium ions, each cation being coo…
Adsorption and diffusion of linear and dibranched C6 paraffins in a ZSM-5 zeolite
2002
The adsorption of n-hexane and 2,2-dimethylbutane on a commercial ZSM-5 zeolite is studied under isothermal and isobaric conditions. ZSM-5 exhibits two different behaviours with linear and dibranched alkanes. A substep at 4 molec.uc−1 is observed on the adsorption isotherm of n-hexane at 348 K. A singular adsorption-desorption process is evidenced on the adsorption isobar at 5.5 kPa with 2,2-dimethylbutane at a temperature close to 343 K when the sample is activated at 298 K under vacuum. The diffusivities have been determined by fitting directly the uptake curves with a numerical resolution of second Fick's law based on finite difference method. Microporous diffusion seems to be rate limit…
Deep oxidation of volatile organic compounds using ordered cobalt oxides prepared by a nanocasting route
2010
Ordered Co3O4 with high surface area (until 173 m2/g) has been successfully obtained through a nanocasting route using mesoporous KIT-6 silica as a hard template and tested in the deep oxidation of a series of representative volatile organic compounds (VOCs): propane as a model of short chain alkane and toluene as a model of monoaromatic hydrocarbon. It has been demonstrated that the catalytic activity for VOC deep oxidation is very elevated and its catalytic stability at moderate temperatures very good. However, the role of the ordered structure in the catalytic performance does not seem to be beneficial. The enhanced catalytic activity has been explained in terms of both the high surface …
Nontemplate Synthesis of CH3NH3PbBr3 Perovskite Nanoparticles
2014
To date, there is no example in the literature of free, nanometer-sized, organolead halide CH3NH3PbBr3 perovskites. We report here the preparation of 6 nm-sized nanoparticles of this type by a simple and fast method based on the use of an ammonium bromide with a medium-sized chain that keeps the nanoparticles dispersed in a wide range of organic solvents. These nanoparticles can be maintained stable in the solid state as well as in concentrated solutions for more than three months, without requiring a mesoporous material. This makes it possible to prepare homogeneous thin films of these nanoparticles by spin-coating on a quartz substrate. Both the colloidal solution and the thin film emit l…
Comparison of silica-based materials for organophosphorus pesticides sampling and occupational risk assessment.
2020
Abstract A novel air sampler has been designed containing a sorbent based on UVM-7 mesoporous silica doped with Ti. The sorbent has been applied for the determination of organophosphorus pesticides in occupational air, followed by gas chromatography with mass spectrometry detection. Thus, several silica materials with different structures (mesoporous UVM-7 and microporous xerogels) were synthesized, and modified with the addition of Ti and Fe. The structure of these materials was proved by transmission electronic microscopy, energy-dispersive X-ray, X-ray diffraction, nitrogen adsorption-desorption and UV–Vis and Raman spectroscopy. The potential of these materials for the retention of pest…
Comparison of the solid-phase extraction efficiency of a bounded and an included cyclodextrin-silica microporous composite for polycyclic aromatic hy…
2016
Solid-phase extraction is one of the most important techniques for sample purification and concentration. A wide variety of solid phases have been used for sample preparation over time. In this work, the efficiency of a new kind of solid-phase extraction adsorbent, which is a microporous material made from modified cyclodextrin bounded to a silica network, is evaluated through an analytical method which combines solid-phase extraction with high-performance liquid chromatography to determine polycyclic aromatic hydrocarbons in water samples. Several parameters that affected the analytes recovery, such as the amount of solid phase, the nature and volume of the eluent or the sample volume and …
Understanding the role of Ti-rich domains in the stabilization of gold nanoparticles on mesoporous silica-based catalysts
2018
3 Tablae, 14 Figures.-- Supplementary material.-- © 2018. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/
Visible light photocatalytic activity of macro-mesoporous TiO2-CeO2inverse opals
2018
Macro-mesoporous TiO2 inverse opal materials were synthesized and they were tested as photocatalysts under visible light irradiation. The influence of cerium oxide addition towards the Rhodamine B (RhB) photodegradation activity was evaluated. Structural, textural, spectral and surface properties of the TiO2-CeO2 inverse opal nanocomposites were studied by XRD, XPS, SEM, TEM, N2 adsorption-desorption, Diffuse Reflectance UV–vis and Photoluminescence spectroscopies. Compared to commercial TiO2 anatase, the macro-mesoporous TiO2 inverse opal exhibited six times higher kinetic rate constant in the RhB degradation under visible light irradiation. The good photocatalytic activity was related to …