Search results for "porous material"
showing 10 items of 361 documents
Nature of cobalt active species in hydrodesulfurization catalysis: combined support and preparation method effects
2007
Abstract Co/γ-Al2O3, Co/SiO2, Co/MCM-41, Co/ASA and Co/S2 (amorphous aluminosilicate with Al/Si = 0.13 and with Al/Si ≈ 2, respectively) were prepared by the method of wet impregnation and by the method of precipitation in the presence of sodium carbonate. The samples were characterised by XPS, XRD and TPR. The catalytic activity was tested in the hydrodesulfurization of thiophene using a continuous flow reactor. Among the wet impregnated catalysts those supported on the amorphous and ordered mesoporous silica exhibited higher HDS activity as compared to the alumina containing supports. Particularly, the use of the mesoporous, high surface area MCM-41 support, determined the best performing…
Heterogeneous fenton oxidation using magnesium ferrite nanoparticles for ibuprofen removal from wastewater: optimization and kinetics studies
2020
In this study, the catalytic properties of Fenton-like catalyst based on magnesium ferrite nanoparticles for IBP degradation were examined. Structural and morphological studies showed the low crystallinity and mesoporous structure for the catalyst obtained via a glycine-nitrate method. The influences of catalyst dosage, oxidant concentration, and solution pH on the pollutant degradation were investigated. The pseudo-first-order model describes kinetic data, and under optimal condition (catalyst dose of 0.5 g L-1, H2O2 concentration of 20.0 mM, and pH of 8.0), apparent rate constant reached 0.091 min-1. It was shown that Fenton reaction was mainly induced by iron atoms on the catalyst surfac…
Total oxidation of naphthalene using bulk manganese oxide catalysts
2013
Several Mn2O3 catalysts have been synthesized using different preparation methods and tested for the total oxidation of naphthalene, a model polycyclic aromatic compound. The catalysts have been characterized by several physico-chemical techniques such as XRD, TPR, XPS, EDX and TEM. The surface area of the catalyst seems to be of paramount importance, since the mass normalized activity of catalysts increases as the surface area of the Mn2O3 catalysts increases. Consequently, a high surface area ordered mesoporous Mn2O3 catalyst, obtained through a nanocasting route using mesoporous KIT-6 silica as a hard template, was the most efficient catalyst for the deep oxidation of naphthalene. In add…
The effect of steric hindrance on the packing of elongated objects
2016
Fibres of various materials can be deposited to form planar mats of fibres. These kinds of structures have gained substantial attention owing to their direct relation to both large industrial fields, such as paper and nonwovens, and biological structures, such as natural networks of fibrin, actin and collagen. In addition, similar structures are important in new emerging fields such as flexible electronics and tissue engineering. The physical properties of these structures are directly related to the connectivity of the network, thus a thorough understanding of the contact formation of the system is of great importance from both a scientific viewpoint as well as for its application in the e…
Recent progress in metal-organic frameworks (MOFs) for CO2 capture at different pressures
2022
Global climate change ensued by the rise in atmospheric CO2 levels is one of the greatest challenges our planet is facing today. This worldwide distress demands technologies that can contribute to our society toward “negative carbon emissions”. Carbon capture and storage (CCS) technologies are in in important role for capturing CO2 from existing emission sources, such as industrial and energy production point sources, before new more prominent modifications to the energy infrastructure can be implemented. Recently, alongside point source capture, direct air capture (DAC) processes have emerged as highly sought-after technologies that are able to capture CO2 from the ambient air. Alongside t…
Metallocenes and post-metallocenes immobilized on ionic liquid-modified silica as catalysts for polymerization of ethylene
2014
Abstract The supported ionic liquid (SIL) strategy was used for the first time to metallocene and post-metallocene heterogeneous catalysts for olefin polymerization. The metal complexes: Cp2TiCl2, Cp2ZrCl2, FI–Ti, and Sal–Ti were immobilized in the 1-(3-triethoxysilyl)propyl-3-methylimidazolium alkylchloroaluminate ionic liquid, anchored on the surface of the mesoporous amorphous silica. The SIL systems were characterized by FTIR, 29Si NMR, N2 adsorption, EA, AAS, TG, and SEM techniques. The developed supported catalytic systems were found to be active in the ethylene polymerization and produce the polyethylene of various properties.
Inside Cover: Hydrogen-Bonded Open-Framework with Pyridyl-Decorated Channels: Straightforward Preparation and Insight into Its Affinity for Acidic Mo…
2017
International audience; A hydrogen-bonded open framework with pores decorated by pyridyl groups was constructed by off-charge-stoichiometry assembly of protonated tetrakis(4-pyridyloxymethyl)methane and [Al(oxalate)(3)](3-), which are the H-bond donor and acceptor of ionic H-bond interactions, respectively. This supramolecular porous architecture (SPA-2) has 1nm-large pores interconnected in 3D with large solvent-accessible void (53%). It demonstrated remarkable affinity for acidic organic molecules in solution, which was investigated by means of various carboxylic acids including larger drug molecules. Competing sorption between acetic acid and its halogenated homologues evidenced good sel…
Sponge‐Like Behaviour in Isoreticular Cu(Gly‐His‐X) Peptide‐Based Porous Materials
2015
We report two isoreticular 3D peptide-based porous frameworks formed by coordination of the tripeptides Gly-L-His-Gly and Gly-L-His-L-Lys to Cu(II) which display sponge-like behaviour. These porous materials undergo structural collapse upon evacuation that can be reversed by exposure to water vapour, which permits recovery of the original open channel structure. This is further confirmed by sorption studies that reveal that both solids exhibit selective sorption of H2 O while CO2 adsorption does not result in recovery of the original structures. We also show how the pendant aliphatic amine chains, present in the framework from the introduction of the lysine amino acid in the peptidic backbo…
Formation of Si/SiO2 Luminescent Quantum Dots From Mesoporous Silicon by Sodium Tetraborate/Citric Acid Oxidation Treatment
2019
We propose a rapid, one-pot method to generate photoluminescent (PL) mesoporous silicon nanoparticles (PSiNPs). Typically, mesoporous silicon (meso-PSi) films, obtained by electrochemical etching of monocrystalline silicon substrates, do not display strong PL because the silicon nanocrystals (nc-Si) in the skeleton are generally too large to display quantum confinement effects. Here we describe an improved approach to form photoluminescent PSiNPs from meso-PSi by partial oxidation in aqueous sodium borate (borax) solutions. The borax solution acts to simultaneously oxidize the nc-Si surface and to partially dissolve the oxide product. This results in reduction of the size of the nc-Si core …
Dual Enzyme-Triggered Controlled Release on Capped Nanometric Silica Mesoporous Supports
2012
The development of nanoscopic hybrid materials equipped with “molecular gates” showing the ability of releasing target entrapped guests upon the application of an external trigger has attracted great attention and has been extensively explored during recent years.1 These nanodevices are composed of two subunits, namely, a suitable support and certain capping entities grafted on the surface of the scaffolding.2 The support is used as a suitable reservoir in which certain chemicals can be stored whereas the molecules grafted in the outer surface act as a “gate” and can control the release of the entrapped molecules at will. Both components are carefully selected and arranged in order to achie…