Search results for "position"

Chemical and physico‐chemical changes during the dry‐cured processing of deer loin

2019

The changes on chemical composition, physico‐chemical parameters, free fatty acids and free amino acids content of dry‐cured deer loin were investigated at day 0, 30 and 60 of dry‐cured process. On the whole, except for pH values (≈5.6) and composition (fat: 4.6–5.2%; protein: ≈73%; ash: ≈17.5%) that did not show differences between the processing days, the other physico‐chemical parameters were affected by curing process. Colour parameters and moisture (from 69 to 38.4%) decreased while the hardness increase from 12.35 to 342 N and lipid oxidation (from 0.2 to 0.52 mg MDA/kg) increased as dry‐cured stage progresses. In similar way, free fatty acid (2250 mg per 100 g of fat at 0 day and 594…

1990

New monomers are described for the synthesis of rod-like poly(1,4-phenyleneethynylene)s with long flexible aliphatic side chains. By palladium catalyzed polycondensation soluble polymers with melting points around 100°C could be obtained. The molecular weight was estimated by GPC, VPO and elemental analysis: GPC showed a multimodale distribution with Pn = 9–15. NMR spectra were found to be in agreement with the assumed polymer structure, but signals of the acetylenic carbons could not be detected. A broad, structureless absorption with a maximum at λ = 410 nm is seen in the UV-VIS-spectra. The thermal decomposition of the substituted PPE's starts at about 400°C and is comparable to that of …

Growth kinetics of racemic heptahelicene-2-carboxylic acid nanowires on calcite (104).

2016

Molecular self-assembly of racemic heptahelicene-2-carboxylic acid on a dielectric substrate at room temperature can be used to generate wire-like organic nanostructures consisting of single and double molecular rows. By means of non-contact atomic force microscopy, we investigate the growth of the wire-like pattern after deposition by experimental and theoretical means. From analyzing the time dependence of the mean row length, two distinct regimes were found. At the early post-deposition stage, the mean length grows in time. Subsequently, a crossover to a second regime is observed, where the mean row length remains nearly constant. We explain these findings by a mean-field rate equation a…

Production of titanium ion beams in an ECR ion source

2002

Abstract Intensive highly charged Ti ion beams were successfully produced in the 14 GHz ECR ion source at the Accelerator Laboratory, University of Jyvaskyla (JYFL). The Ti beams were produced using the MIVOC technique, i.e. by allowing the vapor of an organic compound containing titanium to diffuse into the ion source at room temperature. After optimizing the source parameters the intensity of the 48 Ti 11+ ion beam reached a value of 45 μA.

Stability of ascorbic acid in adapted milk-based infant formulae during storage

2004

A study was made of the effects of storage (for up to 17 months at 22 or 37 °C) on the ascorbic acid contents of four adapted milk-based infant formulae with the same composition except for the iron salt added (lactate or sulphate) and/or the vitamin E source involved (α-tocopherol (α-T) or α-tocopherol acetate (α-TAc)). Ascorbic acid was measured by a voltammetric method. The ascorbic acid contents of the formulae ranged from 0.77–0.84 g kg−1 immediately after manufacture to 0.41–0.48 g kg−1 after 17 months of storage. Samples stored at 22 °C had higher ascorbic acid contents than those stored at 37 °C. A multiple regression analysis performed to evaluate ascorbic acid evolution throughout…

Stabilisation of LDPE cross-linked in the presence of peroxides III. Mass spectrometric study of chemical changes taking place in the n-octadecane–di…

2000

Abstract An attempt was made to identify the products of the reaction between dicumyl peroxide and Irganox 1081, carried out in n -octadecane (saturated hydrocarbon), in conditions of fast decomposition of the peroxide (180°C, 5 min). Mass spectrometry (MS) was employed to find m/z values of molecular and fragment ions in analyses of the components ( n -octadecane, dicumyl peroxide, Irganox 1081) and of the following systems: n -octadecane–dicumyl peroxide, n -octadecane–Irganox 1081 and n -octadecane–dicumyl peroxide–Irganox 1081, after holding them at a temperature of 180°C for 5 min. The tendency of sulphur in Irganox 1081 to oxidise, specifically in the presence of dicumyl peroxide, was…

Contamination from polycyclic aromatic hydrocarbons (PAHs) in the soil of a botanic garden localized next to a former manufacturing gas plant in Pale…

2010

The Botanical Garden lies within the city of Palermo, a few meters away from one of the largest unused Manufacturing Gas Plant in Sicily. The total concentrations of PAHs (23 compounds) in the soil of Botanical Garden ranged from 947 to 18,072 microg/kg. The wide range of PAH concentrations (RSD=84%) found in the soil samples indicates heterogeneous levels of contamination in the area and this can be explained by considering the different tree distributions which prevents the homogeneous deposition of pollutants on the soil. Soils collected in the Botanical Garden generally showed the highest PAH concentrations, being almost 2-3 times higher than the concentration samples obtained in the ur…

Natural gas hydrates vs. induced dysfunctions in the hydrocarbon extraction process

2021

Cantoned fluids in porous-permeable or fractured media of reservoirs have acquired during the geological time special properties. The fluids from the reservoir could be or not a mixture of reservoir water, liquid hydrocarbons and gaseous hydrocarbons. Considering if inside of a reservoir there are two types of substances like natural gas and reservoir water which may be in the form of vaporous than the condition of saturation of gases with water vaporous is fulfilled. This process is taking place due to thermodynamic equilibrium resulting the so-called gas humidity. This state corroborated with a certain chemical composition plus favourable values of pressure and temperature may be decisive…

Shear induced mixing/demixing: blends of homopolymers, of homopolymers plus copolymers, and blends in solution

2000

Shear may shift the phase boundary towards the homogeneous state (shear induced mixing, SIM), or in the opposite direction (shear induced demixing, SID). SIM is the typical behavior of mixtures of components of low molar mass and polymer solutions, SID can be observed with solutions of high molar mass polymers and polymer blends at higher shear rates. The typical sequence with increasing shear rate is SIM, then occurrence of an isolated additional immiscible area (SLD), melting of this island into the main miscibility gap, and finally SIM again. A three phase line originates and ends in two critical end points. Raising pressure increases the shear effects. For copolymer containing systems S…

Spinodal decomposition of chemically fueled polymer solutions

2021

Out-of-equilibrium phase transitions driven by dissipation of chemical energy are a common mechanism for morphological organization and temporal programming in biology. Inspired by this, dissipative self-assembly utilizes chemical reaction networks (CRNs) that consume high-energy molecules (chemical fuels) to generate transient structures and functionality. While a wide range of chemical fuels and building blocks are now available for chemically fueled systems, so far little attention has been paid to the phase-separation process itself. Herein, we investigate the chemically fueled spinodal decomposition of poly(norbornene dicarboxylic acid) (PNDAc) solution, which is driven by a cyclic che…