Search results for "pulse"

Resistivity and irreversibility line of (Hg0.9Re0.1)Ba2CaCu2O6+δ HTS thin films

2003

Abstract High-quality epitaxial (Hg 0.9 Re 0.1 )Ba 2 CaCu 2 O 6+ δ HTS thin films were successfully prepared by pulsed laser deposition (PLD) of Hg-free precursor material on (1 0 0)-oriented SrTiO 3 substrates with subsequent Hg vapour annealing. (Hg 0.9 Re 0.1 )Ba 2 CaCu 2 O 6+ δ HTS thin films exhibit sharp superconducting transitions at T c ≈122 K. The electrical resistance for c -axis oriented HgRe-1212 films has been studied as a function of temperature and dc magnetic fields up to 10 T parallel to the crystallographic c -axis. The irreversibility line for the HgRe-1212 has been deduced from the data and investigated as a function of reduced temperature T / T c . The result of the irr…

Normal and mixed state Hall effect in (Hg0.9Re0.1)Ba2CaCu2O6+δ fully textured HTSC thin films

2004

Abstract Temperature and magnetic field dependence of the Hall effect in the normal and mixed state of fully textured (Hg0.9Re0.1)Ba2CaCu2O6+δ (HgRe-1212) HTSC thin films prepared by laser ablation deposition have been studied. The longitudinal resistivity ρxx and Hall resistivity ρyx of HgRe-1212 superconductor thin films were measured for a wide range of magnetic fields from 125 mT to 12 T with the field perpendicular to the ab plane and the current in the ab plane. A sign change of the Hall resistivity is observed in fields below 3 T in the region close to the superconducting onset temperature. The temperature dependencies ρxx ∝ T and ρyx ∝ 1/T have been observed for HgRe-1212 thin films…

High quality superconducting titanium nitride thin film growth using infrared pulsed laser deposition

2018

Superconductivity in high‐quality (Hg 0.9 Re 0.1 )Ba 2 CaCu 2 O 6+ δ HTSC thin films

2004

High-quality epitaxial (Hg0.9Re0.1)Ba2CaCu2O6+δ (HgRe-1212) HTS thin films were successfully prepared using pulsed laser deposition (PLD) of the Re0.1Ba2CaCu2O6+δ precursor and subsequent Hg vapor annealing. The thin films exhibit a sharp superconducting transition at Tc ≈ 120 K. The resistive transitions have been investigated in magnetic fields up to 6 T parallel and perpendicular to the c-axis. We have determined the activation energy of thermally activated flux-motion for both magnetic field orientations. (© 2004 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)

Single-shot ultrafast laser processing of high-aspect-ratio nanochannels using elliptical Bessel beams

2017

Ultrafast lasers have revolutionized material processing, opening a wealth of new applications in many areas of science. A recent technology that allows the cleaving of transparent materials via non-ablative processes is based on focusing and translating a high-intensity laser beam within a material to induce a well-defined internal stress plane. This then enables material separation without debris generation. Here, we use a non-diffracting beam engineered to have a transverse elliptical spatial profile to generate high aspect ratio elliptical channels in glass of dimension 350 nm x 710 nm, and subsequent cleaved surface uniformity at the sub-micron level.

In-Cylinder Heat Transfer Determination Using Impulse Response Method with a Two-Dimensional Characterization of the Eroding Surface Thermocouple

2021

Heat transfer from the cylinder of internal combustion engines has been studied for decades, both in motored and fired configurations. Its understanding remains fundamental to the optimization of engine structures and sub-systems due to its direct effect on reliability, thermal efficiency and gaseous emissions. Experimental measurements are usually conducted using fast response surface thermometers, which give the instantaneous cylinder surface temperature. The transient component of heat flux through the cylinder wall was traditionally obtained from a spectral analysis of the surface temperature fluctuation, whereas the steady-state component was obtained from Fourier's law of conduction. …

Surface waves on cylindrical solids: numerical and experimental study.

2013

The use of Rayleigh waves enables the solution of several important inspection problems. Propagation of surface waves along straight boundaries has been properly studied but investigations about their propagation on cylindrical surfaces are not sufficient, despite they can be still of interest for NDE applications. It has been proved experimentally that a surface wave pulse suffers a phase shift during its propagation along a cylindrical surface. A numerical approach has been developed to efficiently study these effects for different materials, curvatures and frequencies. This study can help the scientific community to better understand the phenomenon, quite complex and not yet fully explor…

A reexamination of voltage distortion for classical carrier-based vs B-Spline modulation of three-phase Voltage Sources Inverters

2015

Voltage waveform improvement has been the object of several investigations for many years and a manifold of different solutions have been proposed to reduce the harmonic content in Voltage Source Inverters (VSI) power application. In many cases this improvements have been obtained by modifying the reference voltage modulating signal. The recent introduction of cardinal B-spline functions, used as carrier signals, has given rise to a new modulation technique whose main characteristic is a lower value of the Total Harmonic Distortion (THD). After the discussion on the B-Spline modulation principle and on its computational effort, a performance comparisons is carried out by means of Total Harm…

Numerical Model of THz sources and detectors based on Optical Rectification and Electro-Optic Sampling

2013

A model describing a laser based set-up for wideband THz generation and detection is presented. Particular attention is focused on the main broadband phenomena, which occur when THz radiations have to be handled.

Kardiopulmonale Parameter bei Hyperthyreose

1999

Background Hyperthyroid patients often suffer from impaired exercise capacity with dyspnoea. Two well established, non-invasive methods were used to evaluate the influence of hyperthyroidism on cardiopulmonary function. Patients and methods In 42 patients with hyperthyroidism we performed spirometry and cardiopulmonary exercise testing before and after 7 days of propranolol therapy as well as in euthyroidism. Results In hyperthyroidism reduced vital capacity and 1-second capacity were observed (95.5 +/- 2.4% vs 102.6 +/- 1.5%; p = 0.0087; 89.4 +/- 2.3% vs 95.2 +/- 2.2%; p = 0.0179). No changes showed during beta-blockade. At the anaerobic threshold reduced tidal volume and enhanced respirat…