Search results for "reactors"
showing 10 items of 299 documents
Quantification of kinetic parameters for heterotrophic bacteria via respirometry in a hybrid reactor
2010
Over the last decade new technologies are emerging even more for wastewater treatment. Among the new technologies, a recent possible solution regards Moving Bed Biofilm Reactors (MBBRs) that represent an effective alternative to conventional processes. More specifically such systems consist in the introduction of plastic elements inside the aerobic reactor as carrier material for the growth of attached biomass. Recently, one of the mostly used alternatives is to couple the Moving Bed Biofilm Reactor (MBBR) process with the conventional activated sludge process, and the resulting process is usually called HMBBR (Hybrid MBBR). In the MBBR process the biofilm grows attached on small plastic el…
Foaming in membrane bioreactors: Identification of the causes
2012
Membrane bioreactors (MBRs) represent by now a well established alternative for wastewater treatment. Their increasing development is undoubtedly related to the several advantages that such technology is able to guarantee. Nevertheless, this technology is not exempt from operational problems; among them the foaming still represents an "open challenge" of the MBR field, due to the high complexity of phenomenon. Unfortunately, very little work has been done on the foaming in MBRs and further studies are required. Actually, there is not a distinct difference between conventional activated system and MBR: the main difference is that the MBR plants can retain most Extracellular Polymeric Substan…
The role of EPS concentration in MBR foaming: analysis of a submerged pilot plant.
2010
Foaming in Membrane BioReactor (MBR) is a frequently discussed topic. Some authors reported that the phenomenon is due to filamentous organisms, like at Conventional Activated Sludge (CAS) plants. However, in recent years, other authors reported that the Extra-cellular Polymer Substances (EPSs) concentration is an important factor for controlling foam as well. Nevertheless, even if a number of MBR plants are affected by foaming, presently there are no suitable methods to evaluate the phenomenon. To facilitate the study of this controversial phenomenon in an MBR system, certain foam tests proposed in the past for CASPs were investigated. The results of the tests were able to adequately measu…
Experimental sulphide inhibition calibration method in nitrification processes: A case-study.
2020
[EN] Sulphide is one of the inhibitors in the nitrification process in WWTP in regions with sulphate rich soils. As little information is currently available on sulphide nitrification inhibition, the aim of this study was to develop a method based on a modification of the Successive Additions Method to calibrate the effect of sulphide on the activity of ammonia-oxidising bacteria (AOB) and nitrite-oxidising bacteria (NOB). The developed method was then applied to activated sludge samples from two WWTPs with different influent sulphide concentrations. In both cases, sulphide had a greater inhibitory effect on NOB than AOB activity. The sulphide inhibition was found to be lower in the activat…
Free surface oxygen transfer in large aspect ratio unbaffled bio-reactors, with or without draft-tube
2015
Abstract It is widely accepted that animal cell damage in aerated bioreactors is mainly related to the bursting of bubbles at the air–liquid interface. A viable alternative to sparged bioreactors may be represented by uncovered unbaffled stirred tanks, which have been recently found to be able to provide sufficient mass transfer through the deep free surface vortex which takes place under agitation conditions. As a matter of fact, if the vortex is not allowed to reach impeller blades, no bubble formation and subsequent bursting at the free-surface, along with relevant cells damage, occurs. In this work oxygen transfer performance of large aspect ratio unbaffled stirred bioreactors, either e…
An extension of ASM2d including pH calculation
2003
This paper presents an extension of the Activated Sludge Model No. 2d (ASM2d) including a chemical model able to calculate the pH value in biological processes. The developed chemical model incorporates the complete set of chemical species affecting the pH value to ASM2d describing non-equilibrium biochemical processes. It considers the system formed by one aqueous phase, in which biochemical processes take place, and one gaseous phase, and is based on the assumptions of instantaneous chemical equilibrium under liquid phase and kinetically governed mass transport between the liquid and gas phase. The ASM2d enlargement comprises the addition of every component affecting the pH value and an i…
Influence of volatile solids and pH for the production of volatile fatty acids: batch fermentation tests using sewage sludge
2021
The aim of this work was to study the effect of volatile suspended solid (VSS) and pH on volatile fatty acids (VFA) production from waste activated sludge (WAS) fermentation by means of batch tests. The final goal was to gain insights to enhance VFA stream quality, with the novelty of using WAS with high sludge retention time. Results revealed that the optimum conditions to maximize VFAs and minimize nutrients and non-VFA sCOD are a VSS concentration of 5.9 g/L and initial pH adjustment to pH 10. The WAS bacterial community structures were analysed according to Next Generation Sequencing (NGS) of 16S rDNA amplicons. The results revealed changes of bacterial phyla abundance in comparison wit…
Nitrous oxide from integrated fixed-film activated sludge membrane bioreactor: Assessing the influence of operational variables
2017
The influence of the main operational variables on N2O emissions from an Integrated Fixed Film Activated Sludge University of Cape Town membrane Bioreactor pilot plant was studied. Nine operational cycles (total duration: 340 days) were investigated by varying the value of the mixed liquor sludge retention time (SRT) (Cycles 1â3), the feeding ratio between carbon and nitrogen (C/N) (Cycles 4â6) and simultaneously the hydraulic retention time (HRT) and the SRT (Cycles 7â9). Results show a huge variability of the N2O concentration in liquid and off-gas samples (ranged from 10â1μg N2O-N Lâ1to 103μg N2O-N Lâ1). The maximum N2O concentration (1228 μg N2O-N Lâ1) in the off-gas sa…
Greenhouse gas emissions from membrane bioreactors: analysis of a two-year survey on different MBR configurations
2018
Abstract This study aimed at evaluating the nitrous oxide (N2O) emissions from membrane bioreactors (MBRs) for wastewater treatment. The study investigated the N2O emissions considering multiple influential factors over a two-year period: (i) different MBR based process configurations; (ii) wastewater composition (municipal or industrial); (iii) operational conditions (i.e. sludge retention time, carbon-to-nitrogen ratio, C/N, hydraulic retention time); (iv) membrane modules. Among the overall analysed configurations, the highest N2O emission occurred from the aerated reactors. The treatment of industrial wastewater, contaminated with salt and hydrocarbons, provided the highest N2O emission…
Treatment of a submerged anaerobic membrane bioreactor (SAnMBR) effluent by an activated sludge system: the role of sulphide and thiosulphate in the …
2014
This work studies the use of a well-known and spread activated sludge system (UCT configuration) to treat the effluent of a submerged anaerobic membrane bioreactor (SAnMBR) treating domestic waste-water. Ammonia, phosphate, dissolved methane and sulphide concentrations in the SAnMBR effluent were around 55 mg NH4-N L-1, 7 mg PO4-P L-1, 30 mg non-methane biodegradable COD L-1, and 105 mg S2- L-1 respectively. The results showed a nitrification inhibition caused by the presence of sulphur compounds at any of the solids retention time (SRT) studied (15,20 and 25 days). This inhibition could be overcome increasing the hydraulic retention time (HRT) from 13 to 26 h. Among the sulphur compounds, …