Search results for "removal"
showing 10 items of 316 documents
Functionalized Halloysite for enhanced removal of toxic metal ions from aqueous solutions
2018
During the last years several nanomaterials have been extensively used in the heavy metal ions removal from aqueous solutions. Among them, clay minerals have gathered particular interest owing to their unique features (e.g., high specific surface area, low toxicity and natural availability at low price). Halloysite nanotubes (Hal) are particular clay minerals with a predominantly hollow tubular structure. In this work Hal and their derivatives, Hal-NH2 and Hal-SH, were used as adsorbent materials of lead(II) and mercury(II) ions from aqueous solutions. The adsorption ability of clay nanomaterials towards toxic metal ions has been studied takeing into account important variables of the metal…
Kinetic and equilibrium study for Pd(II) removal from aqueous solution by sorption onto calcium alginate gel beads
2013
The more and more increasing use of catalytic converters to reduce the dangerous NOx and CO emission in the atmosphere by vehicle traffic produces a corresponding increase of palladium in the environment [1]. Among the so-called “platinum group Elements” (PGE), elemental palladium seems to be the most hazardous one because it can be easily and quickly oxidized to palladium(II) when put in contact with soil. The presence of palladium oxidized form is of great concern owing to its recognized toxicity towards plants, animals and humans. Therefore, as for the classical “heavy metals”, a removal of this element from the environment is needed and a subsequent recovery for its potential re-use is …
Eutectogels: Materials for Environmental Recovery
Biological nutrient removal in a UCT-MBR pilot
2010
In the last years, there has been an increasing awareness about the environment pollution protection. As a consequence, the Environmental Regulation has increased the emission limits imposing, for instance, lower concentrations at the wastewater treatment plant (WWTP) outlets. As a consequence of this fact, several WWTPs are not able to respect the emission limits and need to be upgraded. In view of such needs new technology are emerging and new WWTP solution schemes are being realized. With respects to the nutrient removal enhancing, a possible solution can be the UCT-MBR which couples the University of Cape Town scheme with a Membrane Bioreactor. In the light of such considerations, the s…
New applications in integrated fixed film activated sludge-membrane bioreactor (IFAS-MBR) systems
2020
Abstract This chapter provides an overview on the development and application of integrated fixed film activated sludge-membrane bioreactor (IFAS-MBR) systems. IFAS-MBRs represent a novel configuration for advanced wastewater treatment, and only a few studies are available in literature. With this aim, the results of some studies on IFAS-MBR systems already published are discussed and compared in this chapter. Literature shows that the influent carbon to nitrogen ratio (C/N) strongly affects the biological process in IFAS-MBR. The organic matter removal efficiency (removed biologically) decreases from 60% to 23.5% with the decrease of influent C/N from 10 to 2 mgCOD mgTN− 1. Nitrogen remova…
The role of EPS in fouling and foaming phenomena occurring in an UCT-MBR pilot plant
2012
The aim of this study is to detect a possible relationship between EPS and fouling and EPS and foaming in a University Cape Town (UCT) membrane bioreactor (MBR) pilot plant. The UCT-MBR pilot plant was fed with 40 L/h of real wastewater and monitored for 165 days. Specifically physical/chemical features of influent, permeate and mixed liquor in different sections were analyzed. The fouling phenomenon was studied monitoring the hydraulic resistances of the membrane. The extracellular polymeric substances (EPSs) concentration inside the aerobic tank were also measured. The foaming phenomenon was monitored by performing the Foam Power and Scum Index testes. Results have shown a high correlatio…
A moving bed membrane bioreactor pilot plant for carbon and nutrient removal
2016
The paper reports the main results of an experimental gathering campaign carried out on a moving bed membrane bioreactor pilot plant conceived for carbon and nutrients removal according to a University of Cape Town scheme. Organic carbon, nitrogen and phosphorus removal, biokinetic/stoichiometric constants, membrane fouling tendency and sludge dewaterability have been assessed during experiments. The achieved results showed that pilot plant was able to guarantee very high carbon removal, with average efficiency of 98%. In terms of nitrification, the system showed an excellent performance, with efficiencies higher than 98% for most of the experiments. This result might be related to the pres…
Influence of ferric iron dosing on aerobic granular sludge: granule formation, nutrient removal and microbial community
2021
BACKGROUND: Three lab-scale sequencing batch reactors were used to investigate the effects of Fe3+ on aerobic granular sludge (AGS) formation, nutrient removal, and microbial community. RESULTS: The addition of 6 and 12 mg Fe3+ L−1 could not shorten the granulation time. However, compared to the reactor without Fe3+ addition (average sludge volume index at 30 min (SVI30) 70.8 mL g−1; stable average particle size 548 μm), the addition of 12 mg Fe3+ L−1 helped improve the physical properties of AGS (average SVI30 57.0 mL g−1; stable average particle size 1067 μm). Furthermore, with 12 mg Fe3+ L−1 addition (Fe3+ to PO43−-P molar ratio = 1.33), effective removal of NH4+-N (≤0.5 mg L−1) and PO43…
Uncertainty of a biological nitrogen and phosphorus removal model
2010
In the last few years, the use of mathematical models in wastewater treatment plant (WWTP) processes has become a common way to predict WWTP behaviour. However, mathematical models generally demand advanced input for their implementation that must be evaluated by an extensive data gathering campaign, which cannot always be carried out. This fact, together with the intrinsic complexity of the model structure, leads to model results that may be very uncertain. Quantification of the uncertainty is imperative. However, despite the importance of uncertainty quantification, only a few studies have been carried out in the wastewater treatment field, and those studies only included a few of the sou…
Noise Filtering Using Edge-Driven Adaptive Anisotropic Diffusion
2008
This paper presents a method aimed to noise removal in MRI (Magnetic Resonance Imaging). We propose an improvement of Perona and Malik's anisotropic diffusion filter. In our schema, the diffusion equation of the filter has been modified to take into account the edges direction, This allows the filter to blur uniform areas, while it better preserves the edges. Both quantitative and qualitative evaluation is presented and the results are compared with other methods.