Search results for "resolution"

Transient Moiré rotation patterns in thin colloidal crystals

2010

A high resolution optical microscopy study on low salt charged sphere suspensions settling under gravity reveals the formation of AB-stacked triangular layers via different transient structures. In particular, metastable triangular Moire rotation patterns (formally corresponding to 1 × 1 Rα super structures) with rotation angles α = 27.8° and α = 38.2° are identified.

Development of a 3D CZT Spectrometer System with Digital Readout for Hard X/Gamma-Ray Astronomy

2019

We report on the development and of a complete X/γ rays detection system (10-1000 keV) based on CZT spectrometers with spatial resolution in three dimensions (3D) and a digital electronics acquisition chain. The prototype is made by packing four linear modules, each composed of one 3D CZT sensors. Each sensors is realized using a single spectroscopic graded CZT crystal of about 20×20×5 mm3. An electrode structure consisting of 12 collecting anodes with a pitch of 1.6 mm and 3 drift strips between each pair of anodes for 48 strips (0.15 mm wide) on the anodic side was adopted. The cathode is made of 10 strips with a pitch of 2 mm and orthogonal to anode side strips. Since the reading of the …

Morphology and structure of electrospun CoFe2O4/multi-wall carbon nanotubes composite nanofibers

2010

CoFe2O4/multiwall carbon nanotubes (MWCNTs) composite nanofibers were produced by electrospinning a dispersion of MWCNTs in a solution of polyvinylpyrrolidone, iron(III) nitrate nonahydrate, cobalt (II) acetate tetrahydrate, absolute ethanol and H2O. Microstructure was examined by scanning electron microscopy (SEM) and high resolution transmission electron microscopy (HR-TEM). Thermal behaviour was studied by thermogravimetry and differential thermal analysis (TG-DTA) and phase analysis of calcined fibers was performed by X-ray diffraction (XRD). Upon thermal treatment at 450 °C defect-free, randomly oriented composite fibers having a mean diameter of 60 ± 10 nm were obtained. The results s…

Real-space imaging with pattern recognition of a ligand-protected Ag374 nanocluster at sub-molecular resolution

2018

High-resolution real-space imaging of nanoparticle surfaces is desirable for better understanding of surface composition and morphology, molecular interactions at the surface, and nanoparticle chemical functionality in its environment. However, achieving molecular or sub-molecular resolution has proven to be very challenging, due to highly curved nanoparticle surfaces and often insufficient knowledge of the monolayer composition. Here, we demonstrate sub-molecular resolution in scanning tunneling microscopy imaging of thiol monolayer of a 5 nm nanoparticle Ag374 protected by tert-butyl benzene thiol. The experimental data is confirmed by comparisons through a pattern recognition algorithm t…

Interfacial reaction during MOCVD growth revealed by in situ ARXPS.

2006

International audience; Angle-resolved X-ray photoelectron spectroscopy (ARXPS) experiments were performed to study in situ the reaction at the film–substrate interface during metal organic chemical vapor deposition (MOCVD) growth of TiO2 thin films deposited on the silicon substrate. The in-depth distribution of chemical species was determined using several ARXPS thickness calculation models considering either single or bilayer systems. By the comparison of two single-layermodels, the presence of a second layer composed of silicon oxidewas evidenced. High-resolution transmission electron microscopy (HRTEM) observations confirmed the stratification of the film in two layers, as well as the …

High-resolution investigation of nanoparticle interaction with a model pulmonary surfactant monolayer.

2012

The pulmonary surfactant film spanning the inner alveolar surface prevents alveolar collapse during the end-exhalation and reduces the work of breathing. Nanoparticles (NPs) present in the atmosphere or nanocarriers targeted through the pulmonary route for medical purposes challenge this biological barrier. During interaction with or passage of NPs through the alveolar surfactant, the biophysical functioning of the film may be altered. However, experimental evidence showing detailed biophysical interaction of NPs with the pulmonary surfactant film are scant. In this study, we have investigated the impact of a hydrophobic polyorganosiloxane (AmOrSil20) NPs on the integrity as well as on the …

Metalenses with high-NA, enhanced resolution and apodization

2017

Dielectric microlenses employed in imaging and focusing for optoelectronics are currently prospects to be substituted by metalenses showing an extraordinary optical performance within notably reduced volumes. Here we present some proposals to achieve an enhanced resolution in metallodielectric metasurface-based lenses established on either efficient arrangements with high numerical aperture or spatial filtering enabling to surpass the limit of resolution derived by the Rayleigh criterion.

A combination magnetic plus Si(Li)-Si(Li) sum-coincidence technique for in-beam studies of internal pair transitions

1979

Abstract An intermediate-image magnetic plus Si(Li) combination pair spectrometer featuring an excellent energy resolution and a pair-line efficiency of 10 −3 , recently presented and demonstrated, has been made more universally applicable by reducing the background underlying the pair lines. The best background reduction is achieved by using two standard Si(Li) detectors and a sum-coincidence method. An experimental coincidence pair-line efficiency of 2.1 × 10 −4 for the 1911 keV E0 pair line in 64 Zn is achieved. In this typical case, the high-energy background (mainly caused by β + activity) is reduced by a factor of about 200 as compared with the direct spectrum of a single detector.

Back Cover: Nanographenes: Ultrastable, Switchable, and Bright Probes for Super‐Resolution Microscopy (Angew. Chem. Int. Ed. 1/2020)

2019

Nanogoniometry with scanning force microscopy: a model study of CdTe thin films.

2007

In this paper scanning force microscopy is combined with simple but powerful data processing to determine quantitatively, on a sub-micrometer scale, the orientation of surface facets present on crystalline materials. A high-quality scanning force topography image is used to determine an angular histogram of the surface normal at each image point. In addition to the known method for the assignment of Miller indices to the facets appearing on the surface, a quantitative analysis is presented that allows the characterization of the relative population and morphological quality of each of these facets. Two different CdTe thin films are used as model systems to probe the capabilities of this met…