Search results for "rill"
showing 10 items of 1272 documents
Effect of a new amido‐imidazolium compound as a clay modifier on properties of polypropylene composites
2021
Halloysite nanotubes (HNT) and montmorillonite (Mt) were modified by a novel, dicarboxylic fatty acid substituted amido-imidazolium chloride. It was found that the modification process of the clays by the imidazolium compound improved their dispersion in the polymer matrix, while HNT were a more beneficial filler of PP than Mt. PP/imidazolium modified HNT composites (PP/HNT-M) showed significant increase in thermo-oxidative stability, flexibility, and toughness, combined with a slight reduction in stiffness, as well as a lack of changes in crystallinity and strength, compared with neat PP. These effects were not observed for PP/Mt composites. The formation of strong interactions between the…
Effects of the indentation process on fatigue life of drilled specimens: optimization of the distance between adjacent holes
2016
The generation of permanent compressive stresses around the holes is recognized as a valuable mean to delay the onset and propagation of the defects and to extend the fatigue life of the mechanical components. In the work, a bilateral indentation process, performed on each side of the component, is widely used in order to create a residual circumferential stress field around the area to be drilled and that persists after the drilling operation. In order to evaluate the process parameters and to identify optimal geometric solutions, several static and fatigue tests are conducted on AW 6082-T6 aluminum alloy specimen where two holes are created. In particular, experimental tests on only drill…
Characterization of micro-fibrillated cellulose fiber suspension flow using multi scale velocity profile measurements
2017
Rheological properties and boundary layer flow behavior of Micro Fibrillated Cellulose (MFC) suspended in water was studied using a novel velocity profiling rheometric technique. The method is based on measuring stationary velocity profiles of fluid flow in a straight tube simultaneously by Doppler Optical Coherence Tomography (DOCT) and by Ultrasound Velocity Profiling (UVP). The high resolution DOCT provides velocity profiles near the transparent tube wall, while UVP yields corresponding information in the interior parts of the flow. The data from the two instruments is combined into a comprehensive velocity profile including both the thin boundary layer near the wall and the interior par…
Enamel evaluation by scanning electron microscopy after debonding brackets and removal of adhesive remnants
2017
Made available in DSpace on 2022-04-29T08:27:13Z (GMT). No. of bitstreams: 0 Previous issue date: 2018-03-01 Background: The bonding of accessories in the dental crown during the orthodontic treatment creates microporosities, thus promoting micromechanical retention of the adhesive to the enamel structure. After debonding brackets, at the end of the active orthodontic treatment, a certain amount of adhesive remnants must be mechanically removed from the enamel. The objective of this study was to compare, by means of scanning electron microscopy, three different methods to remove the adhesive remnants after orthodontic bracket removal. Material and Methods: An experimental analytical study w…
Experimental investigation of Brillouin and Raman scattering in a 2SG sulfide glass microstructured chalcogenide fiber.
2008
International audience; In this work, we investigate the Brillouin and Raman scattering properties of a Ge15Sb20S65 chalcogenide glass microstructured single mode fiber around 1.55 microm. Through a fair comparison between a 2-m long chalcogenide fiber and a 7.9-km long classical single mode silica fiber, we have found a Brillouin and Raman gain coefficients 100 and 180 larger than fused silica, respectively.
One-Dimensional Hypersonic Phononic Crystals
2010
We report experimental observation of a normal incidence phononic band gap in one-dimensional periodic (SiO(2)/poly(methyl methacrylate)) multilayer film at gigahertz frequencies using Brillouin spectroscopy. The band gap to midgap ratio of 0.30 occurs for elastic wave propagation along the periodicity direction, whereas for inplane propagation the system displays an effective medium behavior. The phononic properties are well captured by numerical simulations. The porosity in the silica layers presents a structural scaffold for the introduction of secondary active media for potential coupling between phonons and other excitations, such as photons and electrons.
Transmission anisotropy in triple-film opal photonic crystals
2006
Summary form only given: For photonic crystals (PhCs) to have successful impact on advancement of optical circuits and realisation of various functionalities, the incorporation of artificial defects into 3D PhCs is necessary. Opal films represent a convenient approach to the realisation of 3D PhCs. Taking into account the limited flexibility of the self-assembly, the first steps can be studies of planar defects in opals and hetero-opals. Characterisation of heteroPhCs should include the investigation of the dispersion of photonic bandgaps (PBG). While the dispersion of low-order PBGs in opal films is well known, the high order PBGs were hardly studied so far owing to high requirements to th…
Orthogonal and Oblique Cutting Mechanics
2008
This chapter provides the engineering knowledge and modelling techniques applied in description of the material behaviour in the cutting zone resulting in chip formation and its separation from the bulk material. Geometrical and kinematical characteristics of orthogonal and oblique cutting models are classified and specified. Forces acting on the cutting tools and their measurement methods for several machining operations, such as turning, milling, drilling, boring and grooving, are presented. Moreover, forces acting in the cutting zone and their resolution on the shear plane and the rake and flank faces, along with stress distributions, are presented. The chapter highlights how components …
Solid-fluid interaction in a pillar-based phononic crystal
2016
In this paper, we investigate the wave dispersion of two dimensional pillar-based phononic crystal surrounded in liquid medium. An unit cell structure with reduced pillar height (hp/a)=0.5 and reduced radius (rp/a)=0.3 is simulated using Finite Element Method. The geometrical parameter is chosen to demonstrate a local resonance mechanism that allow the confinement of elastic energy at the interface between the solid and the fluid. In order to identify the energy distribution, we represent the eigenmode at high symmetry (point X) in the first Brillouin zone. The decreasing trend of frequency is also boosted with the increase of pillar height. From the total displacement, the energy is mostly…
Ultrasonic phased array inspection of wire plus arc additive manufacture samples using conventional and total focusing method imaging approaches
2019
In this study, three aluminium samples produced by wire + arc additive manufacture (WAAM) are inspected using ultrasonic phased array technology. Artificial defects are machined using a centre drill, ø 3 mm, and electrical discharge machining (EDM), ø 0.5-1 mm, in a cylindrical through-hole topology. The samples are first inspected using a single-element wheel probe mounted on a KUKA robot in order to investigate the feasibility of using a conventional ultrasonic transducer approach. Unfortunately, the wheel probe is found to be unsuitable for scanning the WAAM specimens and ultrasonic phased arrays are employed next. The set-up includes 5 MHz and 10 MHz arrays (128 elements) in direct cont…