Search results for "rill"
showing 10 items of 1272 documents
Investigating the effect of residual stress on hydrogen cracking in multi-pass robotic welding through process compatible non-destructive testing
2021
Abstract In this paper, the effect of Welding Residual Stress (WRS) on the size and morphology of hydrogen-induced cracks (HIC) is studied. Four samples were manufactured using a 6-axis welding robot and in two separate batches. The difference between the two batches was the clamping system used, which resulted in different amounts of welding deformation and WRS. The hydrogen cracks were intentionally manufactured in the samples using a localised water-quenching method, where water was sprayed over a specific weld pass in a predetermined position. The Phased-Array Ultrasonic Testing (PAUT) system was implemented during the welding process (high-temperature in-process method), to detect the …
2015
AbstractLow-frequency magnetic fields (LF-MF) generated by power lines represent a potential environmental health risk and are classified as possibly carcinogenic by the World Health Organization. Epidemiological studies indicate that LF-MF might propagate neurodegenerative diseases like Alzheimer's disease (AD) or amyotrophic lateral sclerosis (ALS). We conducted a comprehensive analysis to determine whether long-term exposure to LF-MF (50 Hz, 1 mT) interferes with disease development in established mouse models for AD and ALS, namely APP23 mice and mice expressing mutant Cu/Zn-superoxide dismutase (SOD1), respectively. Exposure for 16 months did not aggravate learning deficit of APP23 mic…
La mundialización simbólica
2001
Una lengua con otras lenguas / 2
2008
Photo-oxidation behaviour of polyethylene/polyamide 6 blends filled with organomodified clay: Improvement of the photo-resistance through morphology …
2010
Abstract The impact of small amounts of organomodified clay (OMMT) on the photo-degradation behaviour of two blends obtained by mixing either low-density polyethylene (LDPE) or high density polyethylene (HDPE) with polyamide 6 (PA6) (LDPE/PA6 and HDPE/PA6 75/25 wt-%) was studied. The complex photo-degradation behaviour was followed by monitoring the main physical–mechanical properties of the blends. In particular, mechanical and spectroscopic tests were performed in conditions of accelerated artificial aging. An accurate mechanical and morphological characterization was previously carried out. The presence of the OMMT promotes the unexpected formation of a co-continuous morphology for the H…
Direction-dependent elastic properties and phononic behavior of PMMA/BaTiO 3 nanocomposite thin films
2017
Determination of the anisotropic mechanical properties of nanostructured hybrid films is of great importance to improve fabrication and to enable reliable utility. Here, we employ spontaneous Brillouin light spectroscopy to record the phononic dispersion relation along the two symmetry directions in a supported PMMA (poly(methylmethacrylate))-BaTiO3 hybrid superlattice (SL) with a lattice constant of about 140 nm. Several dispersive elastic modes are resolved for in-plane wave propagation, whereas along the periodicity direction the SL opens a wide propagation stop band for hypersonic phonons and near UV photons both centered at about 280 nm. A thorough theoretical analysis based on the fin…
EVA-montmorillonite nanocomposites: effect of processing condition
2004
The aim of this study is to examine the effect of the compounding apparatus and of processing conditions on the properties of an organoclay-poly[ethylene-co-(vinyl acetate)] (EVA) nanocomposite. The filled materials were prepared using either a discontinuous batch mixer, a single screw extruder, a counter rotating intermeshing twin-screw compounder or a corotating intermeshing twin-screw extruder. The characterization of the obtained nanocomposites was performed by XRD, thermogravimetry, mechanical and rheological measurements. The study has shown the possibility of producing nanocomposites based on EVA and a commercial organoclay (Cloisite 15A) by several mixing equipments. In fact all the…
Injection molding of syndiotactic polystyrene/clay nanocomposites
2006
This study aims at exploring the effect of a commercial organoclay montmorillonite (MMT) on the final properties of syndiotactic polystyrene (sPS) injection-molded samples. To this goal, injection-molded specimens made from neat sPS and commercial MMT modified with various organic compounds were prepared in different molding conditions. Dispersion of clay was attained via melt blending, directly in the injection chamber of the injection-molding machine. The obtained specimens were analyzed by IR spectroscopy, X-ray diffraction, thermogravimetry, and differential thermal analysis, with the aim of elucidating the effect of clay on the microstructures of the samples. Results clearly show that,…
Mechanical properties and water vapor permeability of starch/montmorillonite nanocomposites
2009
Results of an investigation into an unmodified-montmorillonite (MMT)-filled nanocomposite based on plasticized starch are reported. Data on the influence of MMT content on the tensile mechanical properties of the material are presented. Particular attention is given to the water vapor permeability of the nanocomposite. It is found that the resistance to water permeation of plasticized starch can be improved considerably by introducing a rather small amount of the filler into it. Data on the influence of MMT content on the coefficients of moisture diffusion, solubility, and permeability are reported. Also, a simple method for determining the effect of irregularly oriented platelike filler pa…
Starch Based Biodegradable Nanocomposites: Structure and Properties
2009
Plasticized starch (PS)/montmorillonite clay (MMT) nanocomposites were prepared by casting technique. Structural features, stress-strain characteristics and sorption properties were investigated. Upon introduction of rather small amounts of MMT, the PS parameters of the mechanical and barrier properties considerably improve. Tensile strength and elastic modulus of the materials examined decrease with increased moisture content, but the effect of reinforcement of PS with MMT nanoparticles remain intact.